a a a a a a a a a a a a
Distributor Fluke
Distributor Fluke
Customer Services
(021) 2908-5810
/
628111042805
Tools & Chemicals

WD 40 MACHINE & ENGNE DEGREASER DEEPPENETRATION

• Menghilangkan gemuk, oli, kotoran & gumpalan lengket yang membandel
• Aksi cepat
• Mudah dilapbersih dan dibilas dengan air
Download
Products Lainnya
Forged Steel Hand Trowel Shaft Plastic 300mm
Kennedy Forged Steel, Hand Trowel, Shaft Plastic, 300mm
An essential part of every gardener's armoury, the humble trowel is used for planting, transplanting and weeding in everything from expansive raised beds to small balcony gardens.
Pick  Hook Set 120  130mm With 45 Hook Pick90 Hook PickFull Hook PickStraight Pick Handle Square
Kennedy Pick & Hook Set, 120 - 130mm, With 45° Hook Pick/90° Hook Pick/Full Hook Pick/Straight Pick, Handle Square
Including a straight pick, full hook, 90° hook and 45° hook, this set is the ideal product for use on cotter pins, keys, 'O' rings, springs and washers. Comprised of hardened and tempered chrome vanadium steel shanks with a knurled section for precise grip. Finished with an impact resistant square section handles for secure grip even when greasy.

Features and Benefits
• Manufactured from chrome vanadium steel for overall product durability
• Products are hardened and tempered to maintain a good edge even over time
• Knurled section allows for precision and use even in awkward and confined spaces
• Impact resistant plastic handle for bolstered comfort and grip even when greasy or oily
• 4 piece set ensures you'll always have to hand the perfect product for any application

Typical Applications
• For use when removing cotter pins, keys, 'O' rings, springs and washers
Dynamic Grip 5m  16ft Heavy Duty Tape Measure Metric and Imperial Class II
Yamoto Dynamic Grip, 5m / 16ft, Heavy Duty Tape Measure, Metric and Imperial, Class II
Comprising of a textured rubber case, lacquered blade and locking spring assisted blade return, this range of tape measures are ideal for working professionals. With a riveted metal end hook, steel belt clip and wrist strap and corrosion resistant finish, there is an emphasis on affordable quality. Complete with an action lock to hold the blade in place. Products that are 5m and longer, have tape hooks with four rivets, 3m/10' tape hooks have two. Products with a Metric/Imperial blade have 1/32", 1/16" inch and mm graduations, the metric-only blades have mm and cm graduations.

Features and Benefits
• Blades possess a lacquered finish to bolster resistance
• Available to purchase with imperial and metric graduations, or metric only to suit your preferences
• Textured rubber non-slip grip case for improved comfort and impact resistance
• Steel belt clip and wrist strap to allow for ease of transportation
• Spring assisted blade return and lock
• Riveted metal hook end allows for accurate inside and outside measuring

Typical Applications
• Ideal for professional use by carpenters, plumbers, electricians, construction workers, decorators, shop fitters and DIY enthusiasts

Warnings
• Blades are sharp and therefore are meant to be guided back into the housing to minimise risk of injury to personnel and damage to the blade
34in Torque Wrench 200 to 800Nm
Kennedy 3/4in. Torque Wrench, 200 to 800Nm
Kennedy® mechanics torque wrench is chrome plated with a polished steel head and retractable torque setting lever. "Click & Snap" action indicates when the pre-set torque level has been reached. Push through square drive connector instantly reverses the action for quick and simple operation.

Features and Benefits
• Available in a variety of sizes to suit your requirements
• Repeatable accuracy of +/- 4% for precise turning
• Manufactured from steel and chrome plated for durability and resistance to corrosion
• Easily reversed via the push through connector
• 4 easy read scales (Nm, kgf.m, lbf.in x 10, lbf.ft.) for versatility of measuring
• Supplied with factory tested calibration certificate

Typical Applications
• Construction
• Engineering
• Automotive

Standards
• ISO 6789-2:2017 & ASME B107.14M-2004
• ASME B107.14M-2004
• DIN ISO6789