Drager X-plore® 9000

The Dräger X-plore® 9000 supplied air system is designed for light duty industrial applications that require an independent air supply. This modular system provides comfortable and reliable respiratory protection in accordance with EN 14594:05.

Versatile combination options
For the most varied applications there is a large program of Dräger X-plore® helmet, hoods and visors as well as half- and full-face masks available. The system has been tested and approved in accordance with EN 14594:05.

Individual adaptation of the air supply
During deployment the user can adjust the air supply via a control valve at the belt unit between 170 and 400 l/min and thereby adjust it to their individual requirements.

Optionally insertable filter station
The system is rounded off with an optional filter station to which two device wearers can be connected. This removes particles, and mixtures such as oil mist and annoying odours from industrial compressed air and thus clearly improves the quality of the inhaled air.

Respiratory protection independent of the ambient air
The belt-worn set Dräger X-plore 9000 is connected via a 10m long standard or spiral pneumatic hose to an on-site supply of breathing air (e.g. a compressed air mains). This breathable air is then conducted via a breathing hose to the connected Dräger X-plore® head unit.

High level of wearing comfort
The X-plore 9000 excels by its low noise emission and low weight (200 g). This permits safe working for longer periods with a high level of wearing comfort.

Download

Products Lainnya

Drager Polytron® 8200 CAT

The Dräger Polytron® 8200 CAT is an advanced explosion-proof transmitter for the detection of flammable gases in the lower explosion limit (LEL). It uses a catalytic bead DrägerSensor® Ex that will detect most flammable gases and vapours. In addition to a 3-wire 4 to 20-mA analogue output with relays it also offers HART®, Modbus and Fieldbus protocols, making it compatible with most control systems.

Summitech GE-F-09C

PRODUCT CODE : GE-F-09C
COATING MATERIAL : Unsupported Nitrile Flocklined Gloves
LINEAR MATERIAL : Unlined
EXTERIOR FINISHING : Diamond
CUFF STYLE : Straight
THICKNESS MM : 0.38mm ± 0.05mm
LENGTH MM : 330mm ± 10mm
COLOUR : Green
SIZE/WRIST : 7,8,9, & 10
PACKAGING : Pair packed 12 pairs in a bundle 120 pairs in a master carton

Gastron Intelligent Diffusion Oxygen & Toxic Gas Detector / GTD-3000Tx

- Continuous detection of toxic gases and oxygen in explosion hazardous area with flame proof structure
- Self diagnosis function with built-in Microprocessor
- Excellent selectivity by adapting detection principle only for toxic gases & oxygen
- Stable quality and proved detection principle for service life | Built-in back light LCD or OLED display
- Auto calibration and program setting with a magnet bar
- 2-stage alarm, 1-trouble display and relay contact output
- 4-20mA (Current source or Sink) output signal
- Easy configuration of monitoring system by RS-485 Modbus communication
- With the alarm unit - Normal : Green LED -Alarm : Red LED, Buzzer(95 dB)
- Trouble : Yellow LED
- Calibration and maintenance by one-man
- Superior performance for detecting gases below TLV

Halo Mechanical Hazard Gloves, Black, Nylon Liner, Polyurethane Coating, EN388: 2016, 4, 1, 4, 1, X, Size 8

These PU Coated Nylon Lined Gloves from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.

These nylon-lined gloves are polyurethane coated on the palm and offer dexterity and comfort when handling an array of components. Available in a wide range of sizes and colours to suit your exact needs.

Features and Benefits
• 13 gauge seamless nylon liner allows for excellent dexterity and protection as well as comfort
• Polyurethane (PU) coated palms ensure great dexterity even when dry or slightly damp
• Knitted wrists prevent the ingress of dirt and debris
• Colour-coded binding for easy size identification
• Available in white, grey, or black to suit your preferences
• Available in a wide range of sizes to suit your needs

Standards
• Halo® products are BSI tested
• EN 388:2016 4.1.4.1.X.

Drager X-plore® 9000

Informasi Pemesanan