Drager Sensor® IR

Upgrade from Catalytic bead to infrared technology with ease using the DrägerSensor IR. The Sensor IR can replace catalytic ex-sensors (pellistors) from the majority of manufacturers without replacing controllers, cables, junction boxes or control systems.

Problem-free integration
With its Wheatstone bridge emulation, the Sensor IR outputs a mV signal, the same as the pellistor it replaces. The result is the control system sees the same signal input as before the Sensor IR was installed.
Naturally the Sensor IR can be operated with all Dräger control systems, more importantly it can also be connected to almost all installed systems from other manufacturers, without having to modify the wiring.

Smart and flexible
The Sensor IR offers a gas library with three gas categories: methane, propane and ethylene. Therefore, nearly all hydrocarbons are detectable. Temperature-compensatory linearising algorithms allow signal outputs for individual substances.
Through optional accessories – e.g. the process adapter or the duct mount set – a multitude of measuring tasks can be performed professionally.

Immune to pellistor poisons
Technological advantages in infrared technology (e.g. fail-safe operation or immunity against pellistor poisons) have been recognised and valued by gas detection users for a long time.
The Sensor IR now also offers these plus points for systems that have already been installed. Its long life time of over 15 years and long maintenance intervals mean that maintenance costs are significantly lower than for pellistors, make it a cost-effective, premium solution.

Performance
Temperature-compensatory and non-imaging optics
Gas library with 3 gas categories: Methane, propane and ethylene (typical of most hydrocarbons), performance approved in accordance with IEC 60079
Performance approval (in accordance with IEC 60079) for 13 further substances
Dirt and dust protection through hydrophobic splash guard
mV signal for Wheatstone bridge installations
Specified temperature range from - 40 °C to + 65 °C / - 40 °F to + 149 °F
Unrestricted usage in humid atmospheres
Hermetically sealed enclosure made of 316 stainless steel
Slim enclosure design for confined areas of use
Long maintenance interval thanks to minimum long-term drift
No moving parts
Typical life time: 15 years
Ex approvals for worldwide use: ATEX, IECEx, UL, CSA
Dust ex approval for zone 21 and 22
Ingress Protection: IP 65, IP 66 and IP 67

Download

Products Lainnya

Drager PSS® 7000

Developed by professionals for professionals, the Dräger PSS® 7000 breathing apparatus is a major milestone in our continuing development of breathing devices for the professional firefighter.

Drager PSS® Lung Demand Valve (LDV)

Suitable for the most extreme applications whenever Breathing Apparatus has to be worn: with its compact and robust design, and excellent pneumatic performance, the Dräger PSS® Lung Demand Valve (LDV) will always deliver the air that you need.

Drager CO2 - Soda lime cartridge

The Dräger soda lime cartridge was developed for use with Dräger carbon dioxide scrubbers, e.g. A 2000 for submarine applications.

Drager X-plore® 8000

Challenging workplace conditions demand reliable solutions. The Dräger X-plore® 8000 powered-air purifying respirator offers a new level of intuitive handling combined with intelligent electronics that provide the high degree of safety your people need to focus on the task at hand.

Drager Sensor® IR

Informasi Pemesanan