Drager PSD 3000

The Dräger PSD 3000 is a sampling unit for continuous sampling of gas and air mixtures. Combined with Dräger Gas Detectors, the Dräger PSD 3000 serves as a sampling system for gas monitoring purposes. The internal vibrating diaphragm pump has a superior life expectancy, due to the lack of rotating parts.

Dräger PSD 3000
The PSD 3000 can be used for most industrial gases. An electronic circuit monitors the flow rate internally and advises if the flow rate in the input line falls below a predefined minimum threshold. The device offers a flexible programmable messaging of the low-flow signal to the control system.

Fast and easy installation
The sampling unit can be placed either before or behind a gas transmitter depending on application requirements. Two instant tube fittings allow a fast and easy connection of stiff sample lines without tools or manual force. Electrically the sampling unit is installed between the gas transmitter and the central control system. There are cable glands and terminals provided for the respective connections. The 4 to 20 mA signal from the transmitter as well as a separate 24 V wire can be passed through the sampling unit.

Operation
A multicoloured LED indicates the operational status of the device. The LED indicates conditions such as normal operation, a blocked sampling line or a broken supply voltage connection. The flow rate of the sampling line can be adjusted internally to adapt to special needs in certain circumstances. A dust filter protects the sampling pump from dust and aerosols.

Low-flow monitor
The PSD 3000 generates a signal in case the flow in the inlet line drops below a predefined value. This signal can alternatively be transmitted via the 4 to 20 mA line to the control system or by a separate switching contact. The latter option is useful if a digital communication between the transmitter and the controller should be maintained during a low-flow condition. In addition the operation LED indicates with a red colour that the lowflow condition has been triggered.

Download

Products Lainnya

Drager Civil Defense Set

Are you prepared to response to a terrorist attack involving chemical weapons? In today’s world immediate and accurate detection of toxic chemical agents is crucial. Dräger has developed an important new detection system not available from any other manufacturer – specialized sets that detect up to five different chemical agents simultaneously – in just five minutes.

Drager Alcotest® 4000

The breathalyser Dräger Alcotest® 4000 offers responsible drivers a reliable way to test their breath alcohol and gives them the assurance of being legal to drive. This is ensured by precise measurement technology identical to that used by the police: over 30 million breath alcohol tests a year.

Summitech BF4 EB

PRODUCT CODE : BF4 EB
COATING MATERIAL : Nitrile
LINEAR MATERIAL : Cotton Interlock
EXTERIOR FINISHING : Pinked
CUFF STYLE : Pinked
THICKNESS MM : N/A
LENGTH MM : 300
COLOUR : Blue
SIZE/WRIST : S, M, L, XL, XXL
PACKAGING : Bulk packed 12 pairs in a bundle 72 pairs in a master carton

MSA M1 SCBA

The M1 SCBA is fully customizable and can be configured to meet a broad range of firefighter needs. Buy per your budget needs and upgrade later – directly in the field.

Overall, the M1 breathing apparatus represents the most advanced, ergonomic and modular SCBA system on the market which was designed and developed side-by-side with ﬁreﬁghters. This all-new breathing apparatus platform includes several innovative and customizable features that help to enhance hygiene and improve comfort.

Drager PSD 3000

Informasi Pemesanan