Drager PEX 1000

The Dräger PEX 1000 is a converter module that converts the mV signals of the Dräger Polytron® SE Ex sensing heads into mA signals and sends them to a control unit like the Dräger REGARD® family. Together with the Dräger Polytron® SE Ex, the PEX 1000 fulfils the conditions set down for primary explosion protection.

The monitoring team
The Dräger PEX 1000 establishes the link between the Polytron SE Ex sensing heads and a control unit. These sensing heads are installed in a hazardous area, which is then monitored for hydrocarbon concentrations. Their measured data is transmitted as mV signals to the PEX 1000, which is placed outside the hazardous zone. Here, the measured data is converted into standardized mA signals and transferred to the control unit (e.g. Dräger REGARD 2410). If limits are exceeded, the control unit activates suitable countermeasures such as ventilation.

Quickly ready for action
A three-core cable connects the PEX 1000 with the control unit and the Polytron SE Ex. The cable length covers a wide range of up to 500 meters. The PEX 1000 can also easily be integrated or upgraded into existing installations and gas warning systems.

Easy to use
The PEX 1000 is very user-friendly and easy to handle. Maintenance and calibration are adjusted directly on the device with just two buttons and two-digit digital display.

Metrological functionality test
While the secondary explosion protection reduces the risks, the primary explosion protection actively prevents the formation of explosive atmospheres. Together with the Polytron SE Ex and a control unit like the Dräger REGARD 2410, the PEX 1000 fulfils all conditions for primary explosion protection and is tested to EN 60 079-29-1.

Download

Products Lainnya

Halo Safety Helmet With 6 Point Harness, White, ABS, Vented, Reduced Peak, Includes Side Slots

These C6 ABS 6 Point Harness Helmets from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce, and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.

The Halo® range of short peak side vented safety helmets have been designed with comfort and performance in mind. Available in a range of colours, each safety helmet is manufactured from ABS plastic with a 6-point textile suspension harness and fleece sweatband.

Both practical and stylish, these helmets are designed to protect personnel whilst on site. Each helmet also includes a rain gutter and slots for hearing or eye protection accessories.

Features and Benefits
• 6-point textile suspension harness for comfortable wear
• Washable fleece sweatband keeps sweat out of the eyes and off the face
• Manufactured from ABS plastic for resilience and product longevity
• 12 ventilation holes maintain airflow and wearer comfort
• Ratchet adjustable headband for easy fitting
• 4-point self-releasing chin strap mounts for optionally secured fitting
• Slots (30mm) for hearing or eye protection accessories
• Rain gutter prevents the collection and draining of water onto the wearer
• German manufactured for a lower carbon footprint
• Available in a range of colours to suit your needs

Standards
• Halo® products are BSI tested
• EN 397:2012 + A1:2012

Drager Polytron® 6100 EC WL

The Dräger Polytron 6100 EC WL is a wireless transmitter for continuous monitoring of toxic gases and oxygen. The instrinsically safe and SIL2-rated transmitter features completely wireless signal transmission and power supply. The internal battery pack allows the transmitter to operate continually for up to 24 month. This makes the Polytron a flexible and cost efficient solution for plant expansions, upgrades or new installations.

Drager PAS AirPack 2

Designed using leading technology and materials, Dräger’s range of heavy-duty airline apparatus is ideal for use where an extended duration of breathing air is called for. Chemical tank cleaning, toxic spillages or certain tasks when working on offshore installations are all made easier and more comfortable when using the Dräger PAS® AirPack 2.

Drager PSS® AirBoss

The Dräger PSS® AirBoss offers best in class ergonomics and is one of the lightest weight breathing apparatus for firefighting. Lessons learned from firefighters around the world as well as latest innovations in technology have led us to design an even safer and cleaner SCBA system that enables you to breathe more easily and for longer.

Drager PEX 1000

Informasi Pemesanan