The "Classic" reference in the 1/2" impact wrench range, designed with a pin clutch mechanism in oil bath and a metal motor housing for high durability.

Designed for heavy tire changing applications with its torque limited in forward of 370 ft.lbs / 500 Nm and its maximum torque in reverse of 1,920 ft.lbs / 2,600Nm, the 1" impact wrench CP7782TL series limits the risk of over tightening during the tightening phase, while at the same time being very powerful once nuts or bolts have to be removed. In addition, the pinless closed reinforced rocking dog impact mechanism and metal housing offer high durability.

This 3/4" impact wrench, designed with a twin hammer impact mechanism and a metal motor housing for good performance is highly recommended. High productivity is ensured with a torque of 1,100 ft.lbs / 1,500 Nm. This model belongs to the CP7630 series which is composed of 2 models: 3/4" short anvil and 3/4" long anvil (6" anvil).

Connector to Female Parallel


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.