Products

Clearance measurement was never this easy and convenient: The 1 to 7 gas detector detects toxic and flammable gases as well as vapors and oxygen all at once – either in pump or diffusion mode. Innovative signaling design and handy assistant functions ensure complete safety throughout the process.

The Dräger X-am® 3500 was especially designed for clearance measurements and personnel monitoring applications. The 1 to 4 gas detector reliably detects flammable gases and vapors as well as O2, CO, H2S, NO2 and SO2. The innovative signaling design and extensive range of accessories ensure optimum safety and easy handling.

48-22-8460
• Holds Ice for up to 30 hours
• IP65 Rated Protection
• Interior Storage Tray

Plain Shank
Spiral flute, 3 flute. Medium duty. Used for milling of pre-drilled holes to allow bolt or cap head screws to lie flush with the component surface. Manufactured to manufacturers standard

​​The X-am 2800 multi-gas detector measures up to four gases and is equipped with a shock-resistant CatEx sensor. With the Dräger Gas Detection Connect software, it offers live monitoring and powerful fleet management. Designed for personal monitoring, the X-am 2800 offers the highest level of safety at a low cost of ownership.

M18 FHZ-0
• Cuts faster than competitive one-handed recip saws
• Lower vibration for smooth cut starts & one-handed control
• Compact and lightweight design allows for easier cutting in tight spaces or overhead applications

M12 AL-0
• Five high performance LEDs provide 1000 Lumens of light output replacing 250 W halogen lights
• Integrated magnets, clamping mechanism, and key hole for screws / nails provide multiple mounting options for different surfaces
• 3 output modes for optimal brightness and runtime

Ready to weld portable 80A inverter welder suitable for Rutile (Steel), stainless steel and cast iron electrodes up to 2.5 diameter.

Advanced features include Hot Start, increased power at start, Arc Force which instantaneous increase of the current in difficult welding situation and Anti Sticking technology to prevents the electrode sticking for a smoother weld.

High duty cycle: Can weld uptp 62 1.6mm, 50 2.0mm or 20 2.5mm diameter electrodes in 1 hour.

• Menghemat waktu, mudah digunakan
• Sistem penggunaan yang dipatenkan
• Beragam ukuran untuk pekerjaan apa saja, besar atau kecil
• Melindungi dari korosi
• Menembus ikatan karat
• Melarutkan perekat dan menyingkirkan kandungan air untuk menghilangkan kelembaban pada sistem kelistrikan dan permukaan logam

These abrasive paper sheets have silicon carbide, waterproof-resin bonded to paper. They are suitable for wet and dry use, making them versatile. There are a variety of grades in this range of sheets.

Features and Benefits
• Silicon carbide
• Ideal for wet and dry use
• Waterproof resin

Typical Applications
• Polishing
• Finishing
• Metals
• Plastics
• Paintwork
• Ceramics

With an anti-splash rim, removable brass filter, integral handle and either a rigid offset or flexi spout, these polyethylene funnels are ideal for controlled fluid dispensing. Resistant to both oil and chemicals, the products are highly durable and versatile.

Features and Benefits
• Heavy-duty polyethylene construction makes for a resilient product
• Available with either a flexi or offset spout depending on your preference and requirements
• Anti-splash rims minimise the amount of liquid that is spilt when dispensing
• Integrated handle allows you to easily transport and manouevre the product
• Supplied with a brass filter to clear out debris as you pour into the funnel
• Resistant to oils, chemicals and cold weather as well as being shatterproof

Typical Applications
• Workshops
• Domestic
• Automotive

Accuracy and traceability for infrared measurements

Now it’s easy to increase your IR temperature measurement accuracy with the new 4180, 4181 Precision Infrared Calibrators from Fluke Calibration. These infrared temperature calibrators give more consistent, accurate and reliable calibrations because emissivity is radiometrically calibrated, and the target size minimizes size of source effect errors. In addition, these infrared calibrators simplify calibration because they uniquely compensate for errors caused by thermometer emissivity settings.

New accredited performance for point-and-shoot calibrations
• Calibrated radiometrically for meaningful, consistent results.
• Accredited calibration included
• Accurate, reliable performance from –15 °C to 500 °C
• Large target size of 152 mm (6 in) is required for calibrating most thermometers.
• Light instrument weight of 8.6 kg (19 lbs) makes it easy to lift and carry.
• Intuitive, easy-to-read display that indicates when temperature is stable.