Products

The Dräger Automatic Switch over Valve (PAS® ASV) enables the user to connect compressed air breathing apparatus to an external air supply, such as a factory ring main, and be safe in the knowledge that if the external supply were to fail, there would be a safe and uninterrupted transition to the wearer’s back-up air supply.

Second Cut Needle File Set.

Features and Benefits
• Supplied in a convenient PVC Wallet
• High quality files result in efficient stock removal
• Durable construction

Notes
• Content (1 of each): Hand, Flat, Knife, Round, Half Round, Square, Three Square, Crossing, R/Edge Joint, Slitting, Warding, Barrette

Standards Met
• Manufactured to BS 498:1990

'Y' Reducers


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the distance between the two points. A circular spring bow joins the legs, with a knurled extension attached for use when pivoting the dividers. Dividers are used for scribing arcs and circles, a light centre punch mark on the work keeps the pivot leg in the centre while marking.



Features and Benefits

• High quality polished steel with ground finished points

• Adjusting screw mounted across the legs for setting distance between points

• A light centre punch mark on the work keeps pivot leg in the centre while marking

• Ideal for use in scribing arcs and circle applications

FC04 flanged nut manufactured from hardy carbon steel in a black oxide finish for added durability. Available in a range of metric sizes.

Features and Benefits
• Medium carbon steel with HRC 30 - 35 hardness for durability
• Black oxide finish for improved durability

Typical Applications
• Fastenings
• Industrial tooling

Notes
• Available in a range of metric sizes 22-40mm

Second Cut Needle File Set.

Features and Benefits
• Supplied in PVC Wallet
• Use for fine filing, polishing and finishing jobs
• For soft and hard metals
• Non-slip grip handle

Standards Met
• Manufactured to BS 498:1990

Contents (1 of each)
• Hand, Flat, Knife, Round, Half Round, Square, Three Square, Crossing, R/Edge Joint, Slitting, Warding, Barrette

'Y' Reducers


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

Available in a range of sizes, this digital caliper is coolant, water and dust proof to IP67 level. It has a large LCD display, fast response speed, dual readout (mm/inch) and can be used for inside, outside, depth and step measuring. Also enables absolute and relative reading.



Extra batteries available - Order Code PAN9042505E 3V Lithium Metal cell

FC07 - Engineers Stud
Material: Medium Carbon Steel.
Hardness: HRC 30 - 35.
Surface Finish: Black Oxide.

Challenging workplace conditions demand reliable solutions. The Dräger X-plore® 8000 powered-air purifying respirator offers a new level of intuitive handling combined with intelligent electronics that provide the high degree of safety your people need to focus on the task at hand.

The Kennedy® variable pitch hole saws deliver high quality holes in a range of materials, including wood, steel, brass, bronze, and cast iron. The M3 HSS cutting teeth aggressively cut to give a very smooth finish with little to no tear out.

Features and Benefits
• Cuts up to 40% faster than constant pitch saws
• Varying tooth pitch disrupts harmonics to substantially reduce noise
• Tooth life is extended when used in conjuction with a cordless drill

Typical Applications
• Construction
• Engineering
• Maintenance

Notes
• 4-6 teeth per inch
• 28.5mm (11/8") cutting depth

Offering a solution to finishing problems where material hardness makes conventional files ineffective, this 6 piece file set has a diamond powder coated finish. Each file can be used on tungsten carbide, ceramics, carbon, glass, fibreglass and hardened steels such as stainless steel, nimonics and titanium for excellent versatility.The product is plated with finely selected diamond powder 120/140 grain and is supplied in a PVC wallet.

Features and Benefits
• Supplied in a PVC wallet to keep your tools secure and protected
• Finely selected diamond powder coating makes for extremely precise results when filing
• Can be used on a wide range of materials including tungsten carbide, ceramics, glass, hardened steels and carbon for versatility of use
• 6 piece set ensures you have the right shape and size file for your needs
• Non-slip grip handle bolsters user control and comfort

Contents
• 1 x Hand File
• 1 x Half Round File
• 1 x Three Square File
• 1 x Round File
• 1 x Square File
• 1 x Knife File

Typical Applications
• Construction
• Metal Worksing
• Automotive