Products

Senator jobber drills are roll forged from HSS, ensuring uninterrupted grain structure. This provides exceptional strength and durability. Tips are ground for effective cutting. Suitable for drilling wood, plastic, carbon and plain steels where the cutting efficiency of ground flute is not required.

Features and Benefits
• HSS construction for increased rigidity
• Ground tips for effective cutting performance
• Ideal for use on a range of substrates including wood, plastic, carbon and steels

Standards
• Manufactured to DIN 338 Type N

A high power, ultra-convinient rechargeable work light - incredibly versatile and dependable, making it the perfect work companion.

Features and Benefits
• Telescopic design to quickly switch between 30 LED worklight and directional 6 LED torch
• Anti-slip rubber housing - grippy even with wet or oily hands
• Incorporated magnetic base for easy hanging
• Ultimate durability - shock, water and oil resistant

Includes
• Supplied with main charger and in-car charger

Get ready for anything.



The Fluke 376 Clamp Meter offers improved performance for a wide range of flow size situations. With true-rms voltage and current rating, the Fluke 376 can read up to 1000 V and 1000 A in both ac and dc modes.



In addition, the Fluke 376 includes an iFlex™ flexible current probe that extends the measuring range to 2500 A ac while providing increased display flexibility, the ability to measure odd-sized conductors and increased cable access. The Fluke 376 is a direct replacement for the Fluke 337 Clamp Meter.

Series L100 HSS straight shank long series drills are excellent general purpose drills which are designed to drill steels with tensile strength up to 1,000N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite.

Features and Benefits
• Manufactured from HSS for improved toughness
• Black oxide coating for greater heat and wear resistance
• Ideal for general purpose drilling

Typical Applications
• Drilling
• Steels
• Grey cast iron
• Malleable cast iron
• Nickel brass
• Graphite

Standards
• Manufactured to BS 328; Part 1: 1986, DIN 340 RN, ISO 494.

Elbow Connector


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

Constructed from heavy gauge steel and finished with a corrosion resistant powder coated paint, these five shelf racking systems are the ideal way to organise your storage. With an easy interlocking assembly with only two nuts and bolts to join one upright frame to the next, the products are also supplied with rubber feet to protect the floor. The products can be assembled two ways; either as a tall rack with five shelves or with two lower racks. Each shelf is adjustable and can take a load of up to 318kg when fixed to the wall.

Features and Benefits
• Manufactured from heavy gauge steel to ensure longevity of the product and resistance to wear and tear
• Rubber feet are supplied to help protect flooring
• Can be assembled in two ways to allow you to adapt the product to suit your requirements
• Available in two varying sizes to allow you to choose the product that best suits your needs

Typical Applications
• Ideal for industrial use due to the heavy duty structure and high shelf capacity

Notes
• Requires a rubber Mallet to assemble (sold separately)
• Self assembly

The Dräger PointGard 2720 is a self-contained gas detection system for the continuous area monitoring of carbon dioxide (CO2) in ambient air. PointGard 2720’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and is compatible with a remotely mounted Dräger PIR 7200 infrared CO2 sensor.

This ratchet wrench has a 1/2in. square drive and possesses a high polished finish. Fitted with a spring loaded ball bearing socket retainer, the product has a 44 tooth drive for easy turning.

Features and Benefits
• 44 tooth drive allows you to turn easier with less effort
• High polished finish repels dirt and grime and makes for an easier tool clean
• Fitted with spring loaded ball bearing socket retainer to hold the fastener securely

Typical Applications
• DIY
• Automotive
• Construction

Conical flap discs are a high performance alternative to sanding discs where surface finish is important. On light gauge sheet metal, the overlapped abrasive strips slowly wear away revealing fresh abrasive.

Features and Benefits
• The overlap design reduces clogging and ensures the disc always cuts effectively and
• Provides a consistent finish throughout disc life
• No backing pads needed

Notes
• Safe to use at 80m/s on any grinder

Standards
EN12413

Shaft mounted flap wheels can be used in portable air or electric power tools, including die grinders, flexible shafts and drills.

Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting.

Features and Benefits
• Recessed hub design for maximum access in tight corners
• Highly efficient design
• Durable construction means the flap wheels last longer than others on the market

Typical Applications
• Final finishing of metal surfaces
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels
• Edge blending and cleaning. Surface preparation prior to painting and plating
• Can be used on metals, woods, plastic and fibreglass

Notes
• Images are for illustration purposes only

The Fluke 393 FC CAT III 1500 V True-rms Solar Clamp Meter with iFlex is designed for solar photovoltaic (PV) installation technicians and maintenance professionals who work in high voltage DC environments: PV arrays, wind power, electric railways, data centers battery banks for uninterruptible power supplies. The clamp meter will measure up to 1500 V DC and 1000 V AC with test leads, and up to 999.9 A DC or AC through the clamp jaw. The included iFlex flexible current probe extends AC current measurements up to 2500 A. The 393 has a thin jaw, giving you access to cables in crowded combiner boxes. Plus, the test leads are designed with your work in mind, and are also rated to CAT III 1500 V DC.



Key functions of the solar clamp meter:

- IP54 rated, ideal for work outdoors including PV panel testing

- DC power measurement, showing readings in kVA

- Audio Polarity indicator helps prevent accidental miswires

- Visual Continuity provides a bright green light in the display, ideal when working in dark and noisy environments

- Logging and reporting of test results via Fluke Connect software

- When measuring ac current the included iFlex flexible current probe gives you unparalleled access to cable is tight spaces. The iFlex probe can be twisted through extremely small spaces and provide accurate current measurements.



The world's first CAT III 1500 V true-RMS solar clamp meter

The Dräger VarioGard® 3000 EC is a digital transmitter with an integrated electrochemical sensor. It detects oxygen and toxic gases in the ambient air. This affordable system component makes it easier for you to configure a gas warning system.