Products

Cartridge Rolls Aluminium Oxide Cloth Rolls used for weld flash removal, deburring, blending and polishing applications.

Features and Benefits
• Spirally wound cloth rolls wear in use, constantly exposing new abrasive
• Tapered type which is ideal for angles, corners and irregular or concave surfaces

Notes
• An appropriate steel mandrel must be used to secure the abrasive to the tool
• Available in two types

Gembok LOTO Green Zenex Thermoplastic Safety, dengan Lebar 1-1/2in (38mm) dan Tinggi Shackle 3in (76mm)

Fitur Produk:
– Gembok Pengaman Termoplastik
– Lebar 1-1/2in (38mm), Tinggi 3in (76mm), dengan jarak bebas Shackle 1-1/2in (38mm)
– Didesain khusus untuk aplikasi penandaan penguncian
– Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
– Sesuaikan di tempat dengan label permanen dan tertulis
– Kepatuhan terhadap arahan “One Employee, One Lock, One Key”
– Keamanan tinggi, disediakan untuk silinder pengaman
– Penahan kunci – memastikan bahwa gembok tidak dibiarkan terbuka
– Kunci berbeda, 6-pin tumbler dengan lebih dari 40.000 silinder penggantian kunci yang tersedia, Shelf – Pack 6, Master Carton Qty 36

The Fluke 1630 is a MUST HAVE for those who are intent on improving the reliability of their systems and making it impervious to impulse damage. The Fluke 1630 is easy to use, highly accurate and an industry standard”- verified purchaser



The 1630-2 FC clamp measures earth ground loop resistances for multi-grounded systems using the dual-clamp jaw. This test technique eliminates the dangerous and time-consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations for auxiliary test stakes. You can also perform ground tests in places that were previously difficult: inside buildings, on power pylons or anywhere you don't have access to soil to place auxiliary test stakes.



Earth ground ac leakage current measurement

- Identify ac leakage currents without disconnecting the earth ground stake from the grounding system–ideal for system troubleshooting.

- Rugged heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments.



Logging measurements

- The earth ground clamp saves time by automatically recording data at pre-set intervals

- Saves up to 32,760 measurements in memory at the set logging interval.

- Saves time by recording and storing measured values.



Alarm threshold

- User-defined high/low alarm limits, for rapid measurement evaluation.



Band-pass filter

- Selectable band-pass filter function removes unwanted noise from the ac leakage current measurement.



Fluke Connect® Wireless System

- The 1630-2 FC supports the Fluke Connect Wireless System connects the clamp with an app on your smartphone or tablet (may - not be available in all regions).

- You can save these measurements, and images to Fluke Connect Cloud storage and share with your team.

- Maximize uptime and make confident maintenance decisions with data you can trust and trace.

- Access baseline, historical and current measurements by asset.

- Share your measurement data using ShareLive™ video calls and emails.

- The 1630-2 FC is part of a growing system of connected test tools and equipment maintenance software. Visit the website to learn more about the Fluke Connect system.

Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NYS12747LD2031
Type of Light Source : LED
Power Input : 661W
System Lumen Output : 103400 lm
Power Voltage : 200-242V
Lifetime : 40000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 54deg.
Beam Angle : 34deg.
IP Rating : 65
Ambient Temperature : -20 - 35°C
Dimensions : 487mmx537mmx720mm
Body : ADC

For use with Kennedy grease guns and all other hydraulic grease equipment.

With a 1/2" square drive, these vanadium steel bi-hexagonal sockets are the ideal product for working on hard to reach fastenings or more stubborn fastenings due to their 12 point design. Possessing a higher torque than normal sockets, this range of sockets can also effectively grip worn nuts and won't round off existing nuts. Finished with a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories.

Features and Benefits
• Side drive design gives a higher torque than regular sockets
• Ball retaining groove on each product ensures a positive fit with compatible accessories
• Manufactured from vanadium steel for durability
• Available in a variety of sizes to allow you to purchase the size that best suits your requirements
• Requires only a one-twelfth turn to engage the next point of the socket

Typical Applications
• Ideal for use when tightening or loosening hexagonal shaped fastenings in a variety of industries including:
• Automotive
• Construction
• Agricultural
• Plumbing

The PARAT® filtering escape hoods were developed with users, placing the focus on the fastest possible escape. Optimized operation and wearing comfort, a robust case and a sealed filter ensure protection from toxic industrial and/or fire-related gases, vapours and particles for at least 15 minutes.

These flat webbing slings have a high strength-to-weight ratio, are light to handle, and are easy to use. Shock-absorbing construction and wide load-bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid-resistant polyester, treated with a wear-resistant impregnation. All sizes are colour coded to indicate 'SWL' (safe working load), and rating and marked with traceability code. These ratings are for a straight-line pull only. Other variations of pull are shown below along with the relevant 'SWL'.

Features and Benefits
• Manufactured from oil and acid-resistant polyester making for a durable product
• Available in a range of sizes and specifications to suit your application
• Lightweight design and easy to use
• Colour coded to indicate the correct Safe Working Load (SWL) for correct product identification
• Available in a range of sizes to suit different requirements

Typical Applications
• Construction
• Transportation
• Logistics

Standards
• Made to BS EN 1492:1 - 2000

For use with Kennedy grease guns and all other hydraulic grease equipment.

These Bi-Hexagonal 1/2in. square drive sockets possess a 12 point - side drive design that gives a higher torque than normal sockets, allows the product to grip worn nuts and will not round off existing nuts. All sockets have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories and the unique design requires only a one-twelfth turn to engage the next point of the socket. Available in a variety of imperial sizes, each piece is manufactured from chrome vanadium steel, is chrome plated and has a highly polished mirror finish.

Features and Benefits
• Available in a range of sizes to suit your requirements
• Manufactured from chrome vanadium steel which is highly durable
• Highly polished chrome plated finish protects the product against corrosion as well as repelling dirt and grime
• Bi-hexagonal side drive design allows the user to deliver more torque than a standard socket for easier turning
• Able to grip worn nuts as well as not rounding off existing nuts
• Ball retaining groove on each face of the square drive ensures a positive fit with accessories

Typical Applications
• Construction
• Plumbing
• Automotive

Ideal for post rooms, offices and the warehouse. Rubber feet protect surface and prevent dispenser from slipping. Takes large rolls of tape up to 50mm wide and 66m long. Can be screwed to bench.

Features and Benefits
• Highly durable, all metal construction
• Can be screwed to bench
• Tape not included

Connector to Male Taper


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.