Products

Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NYS12547LD2031
Type of Light Source : LED
Power Input : 432W
System Lumen Output : 65500 lm
Power Voltage : 200-242V
Lifetime : 40000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 54deg.
Beam Angle : 34deg.
IP Rating : 65
Ambient Temperature : -20 - 35°C
Dimensions : 487mmx534mmx500mm
Body : ADC

York non-woven fibre hand pads are ideal for cleaning, blending and finishing applications. They are available in a range grades from non abrasive to coarse to suit any application. They are supplied in packs of 10 to ensure they can get you through any project.

Features and Benefits
• Available in a range of grades to suit any application
• Supplied in packs of 10 to ensure they can get you through any project

This range of straight jaw, external circlip pliers is suited for heavy duty, regular and industrial use. Constructed from resilient chrome vanadium steel, fully hardened and tempered, each product also boasts PVC cushion grip handles. Completed by a coil sprung to aid operation. Available in three sizes.

Features and Benefits
• Manufactured from industrial quality chrome vanadium steel that has been fully hardened and tempered for durability
• PVC cushion grip handles boost user comfort and control whilst using
• Coil spring action makes operating the tool easier and lessens hand fatigue
• Available in three sizes to suit your needs

Typical Applications
• Construction
• DIY
• Automotive
• Engineering

HSS multi diameter step drills produce good quality holes in a wide variety of sheet metal, using either a bench drill or light pedestal drilling machine. Manufactured from high speed steel, they offer sound rigidity, strength and stability when machining. Each tool cuts parallel holes in a range of specific sizes and is compatible with materials up to 1/8" (3mm) thick.

Features and Benefits
• High speed steel construction for greater strength, rigidity and stability
• Excellent wear and heat resistance for prolonged tool life
• Cuts parallel holes in sheet metal

Typical Applications
• Drilling
• Sheet metal

Notes
• Available sizes 1-12mm to 6-37mm

These straight jaw circlip pliers are designed for fitting, extracting and adjusting internal circlips. Constructed from an industrial quality chrome vanadium that has been fully hardened and tempered, each set of pliers also boasts PVC cushion grip handles and is coil sprung to aid operation. Available in three sizes and specifications.

Features and Benefits
• Coil sprung design helps to aid action and reduces effort on the part of the user
• PVC cushion grip handles bolster user comfort, grip and control
• Available in varying sizes to suit your requirements
• Manufactured from industrial quality chrome vanadium steel for optimum durability

Typical Applications
• Construction
• Automotive
• Engineering

Gembok LOTO Red Zenex Thermoplastic Safety, dengan Lebar 1-1/2in (38mm) dan Tinggi Shackle 3in (76mm)
Fitur Produk:
– Gembok Pengaman Termoplastik
– Lebar 1-1/2in (38mm), Tinggi 3in (76mm), dengan jarak bebas Shackle 3in (76mm)
– Didesain khusus untuk aplikasi penandaan penguncian
– Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
– Sesuaikan di tempat dengan label permanen dan tertulis
– Kepatuhan terhadap arahan “One Employee, One Lock, One Key”
– Keamanan tinggi, disediakan untuk silinder pengaman
– Penahan kunci – memastikan bahwa gembok tidak dibiarkan terbuka
– Kunci berbeda, 6-pin tumbler dengan lebih dari 40.000 silinder penggantian kunci yang tersedia, Shelf – Pack 6, Master Carton Qty 36

The Dräger HPS® 4500 is a traditional half-shell helmet with a modern design. Its robust outer shell provides you with excellent protection against impact and extreme heat. With a modern visor design, the helmet has superior wearer comfort due to ergonomic and lightweight internal components. A comprehensive range of accessories make our solution a truly versatile helmet across a variety of applications.

These flat webbing slings have a high strength-to-weight ratio, are light to handle, and are easy to use. Shock-absorbing construction and wide load-bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid-resistant polyester, treated with a wear-resistant impregnation. All sizes are colour coded to indicate 'SWL' (safe working load), and rating and marked with traceability code. These ratings are for a straight-line pull only. Other variations of pull are shown below along with the relevant 'SWL'.

Features and Benefits
• Manufactured from oil and acid-resistant polyester making for a durable product
• Available in a range of sizes and specifications to suit your application
• Lightweight design and easy to use
• Colour coded to indicate the correct Safe Working Load (SWL) for correct product identification
• Available in a range of sizes to suit different requirements

Typical Applications
• Construction
• Transportation
• Logistics

Standards
• Made to BS EN 1492:1 - 2000

For use with Kennedy grease guns and all other hydraulic grease equipment.

Unique in its class, this cordless 1/2'' impact is designed for light vehicle tire changing operations and also daily general mechanics tasks on light and heavy vehicles. The two shut off positions guarantee high tightening quality and avoid overtightening. CP8849 delivers high power torque in reverse. The touch pad on the back side of the tool brings comfort and ergonomics. This model belongs to the CP8849 series which is composed of 2 sizes: 1/2'' short anvil and 1/2" 2'' long anvil. Both models are available in baretool or in packs with two batteries and one charger.

Crimped wire flat end de-carbonising brushes are designed for hard to reach areas such as drilled holes, recesses and corners. These wire brushes removes of burrs, rust and paint.

Features and Benefits
• Very flexible in use to get into those hard to reach places

Bulkhead to Female Parallel


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.