Products

York non-woven fibre hand pads are ideal for cleaning, blending and finishing applications. They are available in a range grades from non abrasive to coarse to suit any application. They are supplied in packs of 10 to ensure they can get you through any project.

Features and Benefits
• Available in a range of grades to suit any application
• Supplied in packs of 10 to ensure they can get you through any project

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining.

Features and Benefits
• High speed steel construction for increased tool durability
• Point angle of 118° for precise holemaking and precision cutting
• Black oxide coating helps aid chip flow, reduce heat and prevent staining
• Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite

Typical Applications
• Cutting and drilling
• Ferrous materials
• Steel
• Iron
• Nickel
• Brass
• Aluminium alloy
• Graphite

Notes
• Available in sizes 0.25mm -20.00mm

Standards
• Manufactured to BS 328/DIN338RN

Hydraulic fluids are pressure transfer mediums used to transfer the energy stored by way of a hydraulic pump to the hydraulic actuators of cylinders, motors, and other similar devices. To provide precise, accurate, and stable operation of hydraulic equipment, these fluids must have lubricating properties, rust-prevention and corrosion-prevention properties, special temperature and viscosity properties, stability properties, foam suppression properties, and similar properties.

Among these products, HYDOL, our fire resistant hydraulic fluid, is used in hydraulic equipment such as die-cast machines used in the manufacturing of aluminum automotive parts, steel works, and presses. HYDOL protects plant equipment from fires.

HYDOL HAW Series

For hydraulic equipment that handles melted metal such as steel working equipment and die-cast machines, a major fear is the hydraulic fluid catching on fire. To prevent plant fires before they happen, fire resistant hydraulic fluid, which does not catch on fire easily, is used. Among all fire resistant hydraulic fluids, water-glycol type hydraulic fluid exhibits excellent flame resistance as well as having a good balance among all other hydraulic fluid properties.

HAW Red clear liquid : Water-glycol hydraulic fluid with a flame-retardant and high lubricity. Available in a high-pressure area of 14-25MP discharge pressure.

HYDOL AW Series

These products have excellent anti wear properties. A general use type, anti wear type, and high viscosity index type are available. Various viscosity grades are available for each type.

AW-series : Wear resistance hydraulic fluid.

3/4" heavy duty air impact wrench with a one-piece aluminium housing offering high durability and operator comfort.

Features and Benefits
• High-low power regulator
• Maximum bolt size: M24
• One handed easy push button for forward-reverse operation
• Finger throttle lever

Typical Applications
• The IW750 is ideal for for tightening/loosening of wheel bolts, truck and bus maintenance, farm machinery, and construction equipment

No pipetting, no drips, no timing: With the Dräger DrugTest 5000, a drug test is carried out simply and quickly. The collected saliva sample can be analysed immediately – for an accurate result on the spot.

Gembok LOTO Red Zenex Thermoplastic Safety, dengan Lebar 1-1/2in (38mm) dan Tinggi Shackle 3in (76mm)

Fitur Produk:
– Gembok Pengaman Termoplastik
– Lebar 1-1/2in (38mm), Tinggi 3in (76mm), dengan jarak bebas Shackle 3in (76mm)
– Didesain khusus untuk aplikasi penandaan penguncian
– Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
– Sesuaikan di tempat dengan label permanen dan tertulis
– Kepatuhan terhadap arahan “One Employee, One Lock, One Key”
– Keamanan tinggi, disediakan untuk silinder pengaman
– Penahan kunci – memastikan bahwa gembok tidak dibiarkan terbuka
– Kunci berbeda, 6-pin tumbler dengan lebih dari 40.000 silinder penggantian kunci yang tersedia, Shelf – Pack 6, Master Carton Qty 36

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining.

Features and Benefits
• High speed steel construction for increased tool durability
• Point angle of 118° for precise holemaking and precision cutting
• Black oxide coating helps aid chip flow, reduce heat and prevent staining
• Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite

Typical Applications
• Cutting and drilling
• Ferrous materials
• Steel
• Iron
• Nickel
• Brass
• Aluminium alloy
• Graphite

Notes
• Available in sizes 0.25mm -20.00mm

Standards
• Manufactured to BS 328/DIN338RN

Fluke’s two-pole voltage and continuity testers are built to work the way you work. They give you the best combination of safety, ease-of-use and fast answers available anywhere.

• Designed according to IEC EN 61243-3:2014 to verify the absence of voltage – even with discharged batteries.

• CAT IV 600 V, CAT III 690 V safety rating

• With 4 ways to indicate the presence of voltage – LED indicator, LCD display, audible tone or tactile feedback, always know if hazardous voltage is present (digital display on T130, T150, vibration indicator on T110, T130, T150)

Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NYS12537LD2031
Type of Light Source : LED
Power Input : 462W
System Lumen Output : 68000 lm
Power Voltage : 200-242V
Lifetime : 40000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 64deg.
Beam Angle : 75deg.
IP Rating : 65
Ambient Temperature : -20 - 35°C
Dimensions : 487mmx534mmx500mm
Body : ADC

NEOVAC is well-known as a synonym for high quality vacuum pump oil. We have received endorsements of NEOVAC as the oil used by many vacuum pump manufacturers due to the high level of trust placed in NEOVAC's performance. NEOVAC is used in vacuum equipment in applications such as semiconductors, silicon wafers, vacuum deposition, heat treatment, and packaging and contributes to productivity improvements.

NEOVAC MR Series

Rotary pump vacuum oil is used with the purposes of lubrication and the preservation of airtight seals. It has a low steam pressure, suitable viscosity, and is difficult to emulsify (it has anti-emulsification properties). In other words, it easily separates from water and removes water.

MR-100 : Standard for small pump
MR-200 : Standard for small pump
MR-250 : Standard for small pump
MR-200A : Improved heat and oxidation. Moisture suction is supported
MR-250A : Improved heat and oxidation. Moisture suction is supported. For large pump

NEOVAC SX & SY

Diffusion pump vacuum oil is sprayed either as molecules or as a steam and is used to obtain a vacuum state. It is necessary for these oils to be chemically stable such as by having low steam pressures, by not being transformed due to heat (heat resistance), and by not reacting easily with oxygen (oxidation resistance).

SX : For surface treatment equipment. (vapor deposition, sputter, heat treatment)
SY : For surface treatment equipment. (vapor deposition, sputter, heat treatment)

Suited primarily for heavy duty work, this range of chisel and point ended crowbars are manufactured from heat treated carbon steel. Ideal for dismantling timber constructions, opening packing cases and removing nails, each product is multi-purpose with one chisel end and one point end.

Features and Benefits
• Manufactured from carbon steel for durability
• Heat treated to further bolster product strength
• One chisel end and one point allows for varying applications and makes for a versatile product
• Available in three sizes to ensure you find the correct product for your needs

Typical Applications
• Ideal for heavy duty use including dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar)

The Dräger Interlock® 7000 is an alcohol ignition interlock device (AIID) which prevents a person under the influence of alcohol from starting the vehicle. The Interlock® 7000 has a quick start-up time. Additionally, the device can be equipped with a camera, a GPS and/or a mobile data transfer module, according to the specific customer requirements.