Products

Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NNP19941031
Type of Light Source : LED
Power Input : 200W
System Lumen Output : 26000 lm
Power Voltage : 110-240V
Power Factor : 0.90
Lifetime : 50000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 60deg.
Beam Angle : 60deg.
IP Rating : 65
Ambient Temperature : -40 - 50°C
Dimensions : 304mmx473mmx296mm
Body : ADC

Series J102 are general purpose drills for drilling a wide variety of metallic and non-metallic materials.
Manufactured from solid carbide for increased toughness they conform to BS 328, DIN 338 standards.

Features and Benefits
• Solid carbide construction for toughness
• Suitable for general purpose use on metallic and non-metallic materials

Standards
• Manufacturing Standard: BS 328, DIN 338.

Gembok LOTO, Dielectric Zenex? Thermoplastic Safety. Lebar Body 1-1/2in (38mm) dengan Nylon Shackle 1-1/2in (38mm)

Fitur Produk:
• 406 adalah Gembok Pengaman Termoplastik Dielektrik
• Shackle plastic-nya membantu mencegah sengatan listrik dan juga mencegah arus listrik dari Shackle ke kunci
• Semua komponen tidak memicu percikan dan non-magnetis – plastik, tembaga, kuningan
• Didesain khusus untuk aplikasi penandaan penguncian
• Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
• Kepatuhan dengan arahan “One Employee, One Lock, One Key”
• Penahan kunci – memastikan bahwa gembok tidak dibiarkan terbuka
• Kunci berbeda-beda, tumbler 6-pin dengan lebih dari 40.000 silinder penggantian kunci yang tersedia
• Lebar 1-1/2in (38mm), tinggi 1-3/4in (45mm), Bodi Biru termoplastik, Shackle plastik dengan jarak bebas 1-1/2in (38mm)
• Paket Komersial, Paket Rak Qty 6, Master Carton Qty 36

Increased sensitivity to visualize differences

- Capture smaller temperature differences with increased thermal sensitivity

It's easier to visualize and diagnose problems

- Images on the screen are getting sharper with better color differences

- Display deviations from standard temperature and communicate concerns to your team using multiple Delta-T markers - select one as a reference point and another to display differences

- Multiple square markers on camera - identify min/max temperature for equipment area or equipment array

- Determine heat differences more easily with the new palette and wider array of yellows and greens on screen

Attach, Tilt and push a 205L Drum with no
manual handling issues. Fully compliant and ideal for storage and dispensing.

Features:

• Material: Polyethylene
• Corrosion free
• Size: 160 x 74 x 64cm
• Max. drum capacity: 230L
• Weight: 42kg

Benefits:

•Ideal for dispensing and storage

Stainless steel wire scratch brushes are used on stainless steel and aluminum fabricated products - predominantly in stainless steel welding processes where the use of an ordinary wire scratch brush would create the risk of contamination of the weld. Hardwood handle.

Features and Benefits
• Very durable steel wire bristles
• Highly cost effective

• Mencegah komponen lengket
• Kedap air & melindungi dariair
• Melumasi, membebaskan seal, memulihkan karet yang mengeras

Designed for cleaning all rough surfaces on a variety of materials to remove paint, dirt, rust and stubborn deposits. Hardwood stocks.

Features and Benefits
• Highly durable
• Highly effective - both performance effective and cost effective

Typical Applications
• Suitable to remove paint, dirt, rust and stubborn deposits

B7444 - Suitable for production and assembly applications. Twin hammer mechanism. 1/2" square drive. Three position dial style speed regulator. Forward/reverse selection. Ergonomic and comfortable handle grip. Fixed inlet and exhaust.
Forward: position 1: 4000rpm, position 2: 5000rpm, position 3: 7000rpm.
Reverse: position 1: 3000rpm, position 2: 5000rpm, position 3: 7000rpm.
Square : 1/2"
Maximum torque: 813Nm
Recommended air pressure: 6.2bar/90psi.
Air consumption:(113ltr/min).
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 10mm (3/8").

*Based on a 15 second cycle per minute average use.

The Dräger Alcotest® 6000 allows the professional user to perform a breath alcohol test with speed and precision. The measuring technology of this small and user-friendly portable measuring device has already been proven worldwide and has been sold over 1,000,000 times.

For use with Kennedy grease guns and all other hydraulic grease equipment.

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining.

Features and Benefits
• High speed steel construction for increased tool durability
• Point angle of 118° for precise holemaking and precision cutting
• Black oxide coating helps aid chip flow, reduce heat and prevent staining
• Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite

Typical Applications
• Cutting and drilling
• Ferrous materials
• Steel
• Iron
• Nickel
• Brass
• Aluminium alloy
• Graphite

Notes
• Available in sizes 0.25mm -20.00mm

Standards
• Manufactured to BS 328/DIN338RN