Products

Extremely flexible with a good adhesion. For wire and cable insulation, bundling and reinforcing.

Features and Benefits
• Flame retardant
• Temperature resistant - highly effective from -5 to 80°C
• High quality PVC provides a strong, effective bond

Standards
• BS 4J10:1991
• BS EN 60454-3-1/Type 2

Technical Information
• Thickness: 0.13mm

Manufactured from a high quality steel and hardened for precision and longevity, these trimming knife blades are the ideal product to keep your trimming knife working to an optimum level. Suited for professional, industrial, heavy duty use, the product is available in a pack of 5, 10 or 100 depending on your requirements. Products do not come with the knife handle, blades only.

Features and Benefits
• Possess a superior hardened edge to ensure a sharp edge even with extended use
• Manufactured from high quality steel, making for a durable product
• Available as a pack of 5, 10 or 100 to allow you to purchase the amount most suited for your needs

Typical Applications
• Ideal for heavy duty applications on materials such as carpet and vinyl, making them suited for use by:
• Carpenters
• Construction workers
• Decorators
• Carpet fitters

355mm x 3mm x 25.4mm.
Metal cutting abrasive 355mm diameter Cut off Saw wheel can be used to cut metal, extrusions, welds, tubing, trunking, pipes, etc.

Specification:
Diameter: 355mm.
Bore: 25.4mm.
Thickness: 3mm.
Centre: Flat.
Quantity: 5.

The Dräger Sampling Tubes and Systems are very reliable in use even with complex compounds and mixtures of substances.

Widest temperature range available in a single dry-well
• Combined range from –30 °C to 670 °C, one unit – two blocks
• Two independent temperature controllers (hot and cold side)
• Stability to ±0.02 °C
• Multi-hole wells for calibrating up to eight probes simultaneously

To give you the widest temperature range available in a dry-well calibrator, we’ve combined two of our most popular units. The 9011 allows temperature probes to be calibrated from –30 °C to 670 °C in a single unit.

• Memperbaiki finishing mesin dan memperpanjang masa pakai perkakas
• Mengurangi torsi pemotongan dan meningkatkan efisiensi pemotongan
• Lapisan film yang tidak berwarna, tidak berbau, tidak meninggalkan noda

Weldskill 185 LCD – Complete Multi Process Welding Inverter
The LCD Display makes it super simple to navigate through the welding modes and advanced features

The WeldSkill 185LCD is a complete 3in1 offer that includes all the accessories required to get you MIG, STICK and TIG welding immediately (3m MIG Torch, 4m TIG Torch & 3m Electrode Holder).

Like its predecessor, the WeldSkill 185LCD offers the many benefits of a professional welding machine in a compact, portable, easy to use and affordable self-contained single phase welding inverter – but now with the added feature of a digital 2.8” LCD Digital Display improving navigation of all functions via the full colour screen.
Ideal for welders who want to do light fabrication, maintenance and repairs around their workshop without compromising on quality or safety. And for more intricate welding jobs, especially Aluminium, you can’t go past the WeldSkill 185LCD which is specifically built to run the SGT250 spool gun!

The WeldSkill 185LCD is equipped with an integrated wire feed unit, Voltage Reduction Device (VRD applicable in stick mode only), quick connect gas connection and a host of other advanced features such as Adjustable Burnback, Arc Control, Spot Welding (MIG), Downslope (TIG) etc.

The WeldSkill 185LCD is also backed by a 2 year warranty* and fitted with a 10 Amp plug, meaning you can plug it into any standard 10amp power point and get welding!
And most importantly this multi-process welding inverter is fully compliant to AS 60974.1-2020 and IEC 60974-1.
This complete 3in1 package includes:
• CIGWELD E-180 Mig Torch 3m with Euro Connection
• CIGWELD TIG Torch 17V with Gas Valve and On/Off Switch
• CIGWELD Electrode Holder 3m

LCD DISPLAY
Easy navigation to select & clear LCD Screens
The 2.8” LCD Colour screen whether in MIG/Stick or TIG mode makes it easy to adjust features like Spot Welding (MIG Mode) or Downslope (TIG Mode).

M18 FHIWF12-0X
• Provides maximum productivity by removing stubborn and high torque fasteners faster than the competition
• Most compact cordless High Torque Impact Wrench in its class at 213mm in length
• Industry leading 4-mode drive control with bolt removal mode, allowing for ultimate control.

The Ultimate Range of roller cabinets and top chests is the perfect choice for professional use. Manufactured from steel, each cabinet is finished with an anti-rust and solvent resistant powder coat paint, possesses perforated sides and 45° angled corners. Each cabinet also boasts plastic bumpers on the corners, ergonomic handles, four castors, a full locking system and full opening drawers. Available in two sizes (5 and 7 drawers) to suit your exact storage needs.

Features and Benefits
• Anti-rust and solvent resistant powder coat finish protects against incidental damage
• Perforated sides optimise space with easy to install accessories and tool holders
• 45° angled corners protect against mobility strains and preserve unit shape
• Plastic bumpers on each corner protect against impact
• Non-slip EVA 10mm top mat and 3mm drawer liners prevent damage and protect tools
• Fully opening drawers for greater access
• 45mm Ball bearing slides give good drawer stability and smooth action even under load
• Strong ergonomic side handle, which can fit to either side of the unit, facilitates easy repositioning
• 125mm diameter castors with 2x quick lock brakes absorb shock and can support heavy loads
• Locking mechanism with cylinder locks for greater security
• 'KISS' (Kennedy Integrated Safety System) allows only one wide drawer to open at a time, preventing tipping
• Can be combined with a Top Chest for the ultimate storage solution
• Drawer Load: 45kg
• Static Load: 550kg

Typical Applications
• Industrial
• Garages
• Workshops

Note
• Size of cabinet doesn't include the castors

M18 UBL-0
• 2,500 Lumens with 450m beam distance
• Dual Light head design with 180 degrees of vertical and horizontal head rotation
• 3 output modes: Spot, Flood, Spot/Flood

This impact wrench, designed to be the best tool for general maintenance with its torque of 450 ft.lbs / 610 Nm and its compactness of 4.4" / 112 mm, is highly recommended. Its jumbo hammer impact mechanism and metal housing offer high durability. The CP7731/CP7732 series is composed of 2 models: 3/8" short anvil and 1/2" short anvil.

Available to suit 25 or 205 litre containers, these syphon pumps are an efficient way of controlling and dispensing a host of fluids. Comprised of a flexible plastic outlet and semi-rigid inlet tubes, the hand pumping units incorporate one-way valves. Suited for use with petrol and diesel as well as with non-corrosive liquids. All tubes can be cut to length and are fitted with a threaded bung. Model SPS/25 has a squeeze action and models SPS/205 and SPH/205 have a plunger-type action.



Features and Benefits
• Tubes can be cut to your desired length to meet your requirements
• Suitable for use with petrol, diesel and all non-corrosive liquids
• Available to suit three sized containers
• Flexible nature allows you to manipulate the pump to your desired position

Typical Applications
• Engineering
• Aquatics
• Automotive