Products

Suited primarily for use on metals, these machinists hammers are an invaluable tool. Manufactured to European DIN 1041 standard, each hammer possesses a drop forged steel head and a hickory shaft. Available in a variety of sizes.

Features and Benefits
• Drop forged steel head delivers firm and effective blows
• Hickory shaft is resilient and dampens the effect of vibrations travelling to the hand and wrist
• Available in a host of varying sizes to suit your needs
• Shaft is waxed to further protect against damage and to bolster user comfort

Typical Applications
• Construction
• Engineering
• DIY

Standards
• DIN 1041

All Kennedy® screwdriver bits have a hardness of 58 - 62HRC and these 1/4in. hex Torq® bits are manufactured from high alloy chrome molybdenum steel for use on hand and power tools. Available in a range of sizes.

Features and Benefits
• Hardness of 58-62HRC for resilience
• Suitable to use with hand and power tools for versatility of use
• Manufactured from chrome molybdenum steel making for a robust product
• Available in a range of sizes to suit your exact needs

Typical Applications
• DIY
• Construction
• Electrical

Manufactured from chrome vanadium steel, these 14 combination spanners are suited for industrial use. Supplied in a plastic wallet with varying metric-sized spanners all with a 15° offset and ring end.

Features and Benefits
• Chrome vanadium steel construction makes for a durable product
• Comprehensive set of 14 spanners to ensure you always have the correct product to hand
• Supplied in a plastic wallet for organisation, storage and transportation
• 15° offset for easy turning

Typical Applications
• Automotive
• DIY
• Construction
• Engineering

Standards
• DIN 3113

With 46 metric pieces including bi-hexagonal 12 point sockets, screwdriver bits and varying accessories, this 1/4in. square drive socket set is cost effective and provides a comprehensive set of components and tools for any application. Manufactured from a highly polished chrome vanadium steel and supplied in a tough plastic case with a handle for easy transportation.

Features and Benefits
• Comprehensive 46 piece set ensures you'll always have the correct metric component to hand
• Manufactured from chrome vanadium steel for durability
• Supplied in a moulded plastic case to keep your components stored, organised and ready to transport
• 'Double knurl' socket design allows you to grip even worn nuts
• Side drive design bolsters torque wit ease on the end of the user
• case is secured via clip locking clasps and padlock eye (padlock sold separately)
• Socket design will not 'round off' and damage fastenings

Typical Applications
• Automotive
• Engineering
• DIY
• Plumbing
• Construction

An everyday masking tape that can be used on most surfaces.

Features and Benefits
• Temperature resistant up to 60°C
• Available in a wide range of widths to suit any general needs

Typical Applications
• Ideal for packing, masking, labelling, bundling and joining

These combination spanners are manufactured from chrome vanadium steel with a satin finish body and highly polished heads. Supplied as a set of 18 and metrically sized, the spanners possess a 15° open jaw angle to shank and ring end offset for multi-purpose use. Supplied as an 18 piece set with wrenches from 6-24mm.

Features and Benefits
• Satin finish body and highly polished heads repel dirt and grime
• Manufactured from chrome vanadium steel for overall tool durability
• Also has a ring end for versatility of applications
• 15° open jaw angle to shank allows for easier turning
• Possesses wrenches from 6-24mm to ensure you have the correct tool no matter the application

Contents
• 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22 and 24mm

Typical Applications
• DIY
• Construction
• Automotive

Standards
• DIN 3113

With a fully adjustable, extendable shaft, this magnetic pick up tool is an effective way of keeping your workspace clear of potentially hazardous materials and items such as screws and ferrous debris. Complete with a weighted handle and a permanently magnetised high power magnet.

Features and Benefits
• Small but powerful, permanently magnetised magnet allows the user to pick up ferrous materials
• Fully adjustable shaft allows you to adapt the tool to your needs
• Weighted handle balances the tool for better handling

Typical Applications
• Automotive
• Construction
• Workshops

These aviation snips have the ability to cuts straight, left or right. Possessing a self-opening action for fast, effortless feed, with a built-in convenient, protective safety latch. Manufactured from drop forged chrome vanadium ground steel with a hardness of 54 - 58HRc. The double fulcrum compound action amplifies the pressure applied for easier cutting of up to 1.2mm cold rolled steel sheet. Completed by anti-slip guards, thumb lock and a spring loaded self-opening action for one handed operation.

Features and Benefits
• Anti slip guards for extra protection from slippage
• Thumb lock to secure the jaws when not in use
• Drop forged chrome vanadium steel blades to hold a good cutting edge even over time
• Spring loaded, self opening action to allow for effortless feed and single handed operation
• Double fulcrum allows for easier cutting of even 1.2mm steel

Typical Applications
• For use on mild steels and other non-ferrous materials

Kennedy combination spanners are manufactured from chrome vanadium steel with a satin finish body and highly polished heads. 15 open jaw angle to shank and ring end offset. This 14 piece metric set is a cost effective way of having to hand the right size spanner for a variety of applications. Supplied in a red plastic, flexible wallet for protection.

Features and Benefits
• Chrome vanadium steel construction making for a robust product
• Satin finish with highly polished heads to repel dirt
• 15° open jaw angle to deliver easy torque and turning action
• Supplied in a handy plastic wallet
• 14 Piece set ensures you possess a wide variety of sizes

Typical Applications
• Automotive
• Construction
• DIY

Standards
• 6mm - 24mm conform to DIN 3113
• 27mm - 32mm conform to ASME B107.6

Suited primarily for use on metals, these machinists hammers are an invaluable tool. Manufactured to European DIN 1041 standard, each hammer possesses a drop forged steel head and a hickory shaft. Available in a variety of sizes.

Features and Benefits
• Drop forged steel head delivers firm and effective blows
• Hickory shaft is resilient and dampens the effect of vibrations travelling to the hand and wrist
• Available in a host of varying sizes to suit your needs
• Shaft is waxed to further protect against damage and to bolster user comfort

Typical Applications
• Construction
• Engineering
• DIY

Standards
• DIN 1041

Suited primarily for use on metals, these machinists hammers are an invaluable tool. Manufactured to European DIN 1041 standard, each hammer possesses a drop forged steel head and a hickory shaft. Available in a variety of sizes.

Features and Benefits
• Drop forged steel head delivers firm and effective blows
• Hickory shaft is resilient and dampens the effect of vibrations travelling to the hand and wrist
• Available in a host of varying sizes to suit your needs
• Shaft is waxed to further protect against damage and to bolster user comfort

Typical Applications
• Construction
• Engineering
• DIY

Standards
• DIN 1041

With a long reach handle and a high power, permanent magnet, this magnetic pick up tool is designed for easy pick-up and release of metal objects. It can be used for scrap and ferrous debris. Complete with a spring- loaded magnet release for easy disposal of debris.





Features and Benefits


• Permanent magnet never needs to remagnetised


• Spring loaded magnet release for easy discarding of the ferrous materials


• Long reach handle allows you to access awkward and hard to reach areas





Typical Applications


• Ideal for use in environments where debris and scattered pieces are a regular occurrence, but a safe and tidy workspace is required such as workshops, warehouses and building sites