Products

Optimize bolting and unbolting with this 1" impact wrench. Featuring a durable pinless rocking dog clutch mechanism, aluminium body and clutch housing, this tool is designed to operate comfortably in the most demanding industrial environments, including both maintenance and production. The CP6910/CP6920 Series is defined by 2 models, pistol CP6110-P24 and straight D-handle CP6120-D24 for a delivered max reverse torque of up to 2,600 Nm / 1920 ft.lb.

48-22-8424
48-22-8425
• Part of the PACKOUT™ Modular Storage System
• Constructed with Impact Resistant Polymers
• IP65 Rated Weather Seal

1'' Impact Wrench - 6'' anvil

These high-quality bench grinding wheels are ideal for a wide range of material applications. Designed to fit on all leading brand machines, they provide an excellent performance to all projects.

Features and Benefits
• Suitable for all-purpose applications
• High hardness levels for consistent results

Typical Applications
• Sharpening
• Deburring
• Rust removal

Standards
• EN 12413

Warnings
• Not permitted for wet grinding

Notes
• All 150mm grinding stones fit 13mm bore sizes with 32-13mm diameter reduction bushes supplied where necessary

When it comes to portable welders, the ESAB Rebel EMP 235ic is packed with the power to weld up to a half-inch on mild steel, measuring in at 235A at 20%. You have the ability to weld a wide range of metal thicknesses and applications, including the full range of 0.9 in both short arc and spray arc transfer, up to 1.0 solid wires, and up to 1.2 cored wires. Plus, ESAB Rebel EMP 235ic can also weld Stick rods up to 4mm and TIG rods up to 4.8mm.

Whether you have been welding for two years or 20, ESAB Rebel 235ic can make your job easier with sMIG (smartMIG). For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.

You’re on-site, out in the field, and in the shop. You need a machine that can go where you go and withstand the harsh environments you face. Rebel can. With a sturdy multi-handle roll cage, steel unibody construction, and IP23S-level protection, Rebel’s rugged exterior gives you the confidence to go where you need to go without fear.
The Rebel is a true Multi-Process inverter with professional-grade MIG performance, including flux-cored, Excellent MMA performance, including stainless steel, 6010 and 6011 cellulosic and 308L electrodes
• Exceptional lift TIG performance down to 5A

Increased robustness thanks to the powerful 1-1/2" impact wrench, designed with oil bath twin hammer clutch mechanism, aluminium body, and clutch housing. With a maximum reverse torque of up to 3,900 Nm / 2,875 ft.lb., the CP6930-D35 is the ideal solution for maintenance applications. It is reversible and its steel trigger allows makes it easy to use in the bolting phases. The CP6930-D35 is equipped with a hole socket retainer for maximum safety.

This 1/4" & 3/8" butterfly impact wrenches series, designed for tight applications is highly recommended. The double rocking dog impact mechanism and metal motor housing offer high durability. High productivity is ensured with a torque of 80 ft.lbs / 110 Nm. The CP7711/CP7721 series consists of 2 models: 1/4" short anvil and 3/8" short anvil.

The CP721 Series 3/8" impact wrench offers a rocking dog mechanism and a metal motor housing for high durability and smooth operation. High productivity is ensured with a torque of 75 ft.lbs / 102 Nm while also being compact and comfortable to use.

RP250

Used for dispensing lubricants and disel, this cast iron pump with a steel suction tube and spout is the easy way to control the flow of said liquids. Suitable for container size of 200 litres, the pump possesses an inlet of 2" BSP and M59 x 5 male thread.

Features and Benefits
• Cast iron pump with steel suction tube and spout making for a hardy product
• Suited for use on a 200 lite capacity barrel
• With a 980mm tube to easily dispense liquids when necessary

Typical Applications
• Suited for controlling the flow of fluids in a 200 litre barrel

M18 PAL-0
• 1500 Lumens of TRUEVIEW™ High Definition Output
• Powerful Magnetic base
• 2" Spring Loaded Clamp

The CP772 Series is the "Classic" 3/4" impact wrench, designed with a pin clutch mechanism in oil bath and a metal motor housing for high durability.

Supplied in a moulded plastic carry case, this set of 4 circlip pliers is the ideal product for the removal and insertion of circlips. Manufactured from specially selected steels combined with a dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. Finished with a double polished head, joint and an induction hardened cutting edge. Features pliers for both external and internal circlips.

Features and Benefits
• Supplied in a plastic moulded carry case for ease of storage, organisation and transportation of your tools
• 4 piece set ensures you always have the correct set of circlip pliers no matter the application
• Handles have a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip
• Pliers are manufactured from specially selected steels designed for strength
• Double polished head and joint to repel dirt
• Induction-hardened cutting edges that hold over time even with frequent use

Contents
• External straight jaw, 10 - 25mm and 19 - 40mm
• Internal straight jaw, 10 - 25mm and 12 - 65mm

Typical Applications
• Used to remove and insert both external and internal circlips which are commonly used in the automotive industry as well as being suitable for production line environments where repetitive work is undertaken