Welding Equipment
ESAB Rebel EMP 215ic
The ESAB Rebel EMP 215ic has everything you need to get the job done – start to finish – and all controlled via a 4.3in LCD screen! This true Multi-Process welder means that whether you are welding MIG/MAG with solid or Flux-Cored wire, MMA – with even the most tricky electrodes, or Lift TIG, Rebel will perform like it was born to run that process.
ESAB Rebel 215ic is a compact, portable welder ideal for transporting from jobsite to jobsite. With the Smart MIG function it doesn’t matter whether you have been welding for 2 years or 20 years, Rebel will make your job easier. For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.
Backed by a 3-year warranty, the ESAB Rebel EMP 215ic is equipped with a host of features; Adjustable Burnback, Inductance and Trigger Hold, Arc Force, Hot Start, Pre & Post Flow, Weld Parameter Storage, VRD, a Quick Connect gas connection, a solid cast integrated wirefeeder and an IP23S rated robust casing.
ESAB Rebel 215ic is a compact, portable welder ideal for transporting from jobsite to jobsite. With the Smart MIG function it doesn’t matter whether you have been welding for 2 years or 20 years, Rebel will make your job easier. For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.
Backed by a 3-year warranty, the ESAB Rebel EMP 215ic is equipped with a host of features; Adjustable Burnback, Inductance and Trigger Hold, Arc Force, Hot Start, Pre & Post Flow, Weld Parameter Storage, VRD, a Quick Connect gas connection, a solid cast integrated wirefeeder and an IP23S rated robust casing.
Download
Produk Lainnya
Integrated electronics allows constant welding power for a very soft fusion induced to its direct current. Suitable for all types of electrodes such as steel, stainless steel or cast iron, it is ideal for intensive use by the public or the trade , it is can also be used for precision work in TIG Lift and MMA Pulse.
• Remarkable arc performance, basic electrodes will not longer be a problem.
• Very good penetration and perfect arc stability.
• MMA Pulse : Developed for pipe welding as well as vertical welding.
• Delivered in a case with earth clamp and electrode holder.
• With an IP21 protection rate, it is suitable for outdoor work on site.
• Not affected by mains fluctuations or arc length.
• Protected and compatible with a Generator 6Kw (7,5Kva)
TIG Lift :
• For the meticulous work on thin metal sheets
• Easy start
• Finish quality
• Downslope auto
• Remarkable arc performance, basic electrodes will not longer be a problem.
• Very good penetration and perfect arc stability.
• MMA Pulse : Developed for pipe welding as well as vertical welding.
• Delivered in a case with earth clamp and electrode holder.
• With an IP21 protection rate, it is suitable for outdoor work on site.
• Not affected by mains fluctuations or arc length.
• Protected and compatible with a Generator 6Kw (7,5Kva)
TIG Lift :
• For the meticulous work on thin metal sheets
• Easy start
• Finish quality
• Downslope auto
The days of entry-level mediocrity are over. With unconventional features, unprecedented performance, and an all new industrial design, Rogue ushers in a new era of welding capability that will force you to rethink everything you expect from a portable GTAW machine at this price point. Are you ready to go rogue?
Ready to weld portable 80A inverter welder suitable for Rutile (Steel), stainless steel and cast iron electrodes up to 2.5 diameter.
Advanced features include Hot Start, increased power at start, Arc Force which instantaneous increase of the current in difficult welding situation and Anti Sticking technology to prevents the electrode sticking for a smoother weld.
High duty cycle: Can weld uptp 62 1.6mm, 50 2.0mm or 20 2.5mm diameter electrodes in 1 hour.
Advanced features include Hot Start, increased power at start, Arc Force which instantaneous increase of the current in difficult welding situation and Anti Sticking technology to prevents the electrode sticking for a smoother weld.
High duty cycle: Can weld uptp 62 1.6mm, 50 2.0mm or 20 2.5mm diameter electrodes in 1 hour.
Transmig 185 Ultra features an impressive AUTO SET function that allows the user to weld like a Pro with no previous welding experience necessary.
Simply select the material type, thickness & consumable diameter and AUTO SET will pre-set the Wirefeed Speed (Amperage) and Voltage (MIG) along a pre-programmed synergic line. Experienced welders can then customise their settings by tweaking their wire speed and volts according to their technique and other factors. The AUTO SET function is available in all 3 processes: MIG, STICK and TIG!
Easily return to your previous weld thanks to a sophisticated Memory Function, or save up to 9 of your favourite weld settings!
Transmig 185 Ultra comes with an integrated wire feeder that holds up to a 200mm spool, and boasts a range of Professional Features to ensure optimal welding results:
• Burnback Control
• Arc Control
• 2T/4T
• Spot/Stitch Weld
• Pre/Post Flow
• Up/Down Slope
• Arc Force
• Hot Start
• Anti-Stick
• VRD (applicable in Stick mode only).
Most importantly the 185 Ultra is fitted with a 10Amp plug, allowing you the flexibility to plug and play anywhere in your home or workshop.
The power source weighs just over 17kg, and all accessories can be packed inside a convenient purpose built Heavy Duty Backpack (W4018001), making the Ultra portable and ideal for any home or job site.
The Transmig 185 Ultra is back by a 3-year warranty and is fully compliant to Australian Standard AS 60974.1 and IEC 60974.1 so you know you have a safe product you can trust!
With excellent welding performance across a broad range of applications, anyone can weld like a Pro!
Simply select the material type, thickness & consumable diameter and AUTO SET will pre-set the Wirefeed Speed (Amperage) and Voltage (MIG) along a pre-programmed synergic line. Experienced welders can then customise their settings by tweaking their wire speed and volts according to their technique and other factors. The AUTO SET function is available in all 3 processes: MIG, STICK and TIG!
Easily return to your previous weld thanks to a sophisticated Memory Function, or save up to 9 of your favourite weld settings!
Transmig 185 Ultra comes with an integrated wire feeder that holds up to a 200mm spool, and boasts a range of Professional Features to ensure optimal welding results:
• Burnback Control
• Arc Control
• 2T/4T
• Spot/Stitch Weld
• Pre/Post Flow
• Up/Down Slope
• Arc Force
• Hot Start
• Anti-Stick
• VRD (applicable in Stick mode only).
Most importantly the 185 Ultra is fitted with a 10Amp plug, allowing you the flexibility to plug and play anywhere in your home or workshop.
The power source weighs just over 17kg, and all accessories can be packed inside a convenient purpose built Heavy Duty Backpack (W4018001), making the Ultra portable and ideal for any home or job site.
The Transmig 185 Ultra is back by a 3-year warranty and is fully compliant to Australian Standard AS 60974.1 and IEC 60974.1 so you know you have a safe product you can trust!
With excellent welding performance across a broad range of applications, anyone can weld like a Pro!