Welding Equipment
ESAB ET200iP Pro
The days of entry-level mediocrity are over. With unconventional features, unprecedented performance, and an all new industrial design, Rogue ushers in a new era of welding capability that will force you to rethink everything you expect from a portable GTAW machine at this price point. Are you ready to go rogue?
Download
Produk Lainnya
The days of entry-level mediocrity are over. With unconventional features, unprecedented performance, and an all new industrial design, Rogue ushers in a new era of welding capability that will force you to rethink everything you expect from a portable GTAW machine at this price point. Are you ready to go rogue?
The ESAB Rebel EMP 215ic has everything you need to get the job done – start to finish – and all controlled via a 4.3in LCD screen! This true Multi-Process welder means that whether you are welding MIG/MAG with solid or Flux-Cored wire, MMA – with even the most tricky electrodes, or Lift TIG, Rebel will perform like it was born to run that process.
ESAB Rebel 215ic is a compact, portable welder ideal for transporting from jobsite to jobsite. With the Smart MIG function it doesn’t matter whether you have been welding for 2 years or 20 years, Rebel will make your job easier. For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.
Backed by a 3-year warranty, the ESAB Rebel EMP 215ic is equipped with a host of features; Adjustable Burnback, Inductance and Trigger Hold, Arc Force, Hot Start, Pre & Post Flow, Weld Parameter Storage, VRD, a Quick Connect gas connection, a solid cast integrated wirefeeder and an IP23S rated robust casing.
ESAB Rebel 215ic is a compact, portable welder ideal for transporting from jobsite to jobsite. With the Smart MIG function it doesn’t matter whether you have been welding for 2 years or 20 years, Rebel will make your job easier. For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.
Backed by a 3-year warranty, the ESAB Rebel EMP 215ic is equipped with a host of features; Adjustable Burnback, Inductance and Trigger Hold, Arc Force, Hot Start, Pre & Post Flow, Weld Parameter Storage, VRD, a Quick Connect gas connection, a solid cast integrated wirefeeder and an IP23S rated robust casing.
The CIGWELD TRANSMIG 175i+ is a self-contained single phase multiprocess welding inverter that is capable of performing GMAW/FCAW (MIG), MMAW (Stick) and GTAW (Lift TIG) welding processes.
The unit is equipped with an integrated wire feed unit, voltage reduction device (VRD applicable in Stick mode only), digital voltage and amperage meters, and a host of other features in order to fully satisfy the broad operating needs of the modern welding professional.
• 185A (MIG Mode) 3-in-1 MIG / Stick / Lift TIG Inverter Welder
• Digital Amperage and Voltage Meters
• Highly portable with carrying handle, carry strap and under 15kg
• Full multi-process capabilities; MIG, Stick and Lift TIG
• Integrated Wire Feed Unit Spools up to 5kg or 200mm
• Standards compliant VRD
• Fully compliant to AS 60974.1-2006. Enclosure Rated to IP23S – Designed for Indoor & Outdoor use.
• Arc Control (Inductance) for adjusting the intensity of the arc
• Adjustable Burnback Control for controlling MIG wire stick out
• Euro MIG Torch Connection
• Accepts Mechafin style 2R feed rolls
• Robust 50mmå_ Dinse twist lock connections
• 3 Year Limited Warranty
The unit is equipped with an integrated wire feed unit, voltage reduction device (VRD applicable in Stick mode only), digital voltage and amperage meters, and a host of other features in order to fully satisfy the broad operating needs of the modern welding professional.
• 185A (MIG Mode) 3-in-1 MIG / Stick / Lift TIG Inverter Welder
• Digital Amperage and Voltage Meters
• Highly portable with carrying handle, carry strap and under 15kg
• Full multi-process capabilities; MIG, Stick and Lift TIG
• Integrated Wire Feed Unit Spools up to 5kg or 200mm
• Standards compliant VRD
• Fully compliant to AS 60974.1-2006. Enclosure Rated to IP23S – Designed for Indoor & Outdoor use.
• Arc Control (Inductance) for adjusting the intensity of the arc
• Adjustable Burnback Control for controlling MIG wire stick out
• Euro MIG Torch Connection
• Accepts Mechafin style 2R feed rolls
• Robust 50mmå_ Dinse twist lock connections
• 3 Year Limited Warranty
Designed to hold Tungsten electrodes and transfer current whilst using your TIG torch, these collets are ideal for use on WP17, WP18 and WP26 torches. Available in varying sizes to suit your required wire size, they are crucial in upholding the quality of your TIG welding torch.
Features and Benefits
• An economical way to keep your TIG torch operating to its full potential
• Manufactured to a high standard to ensure a steady current and provide a stable arc needed for precision welding
• Available in various sizes to ensure you find the correct fit for your torch
Typical Applications
• Ideal for use with WP17, WP18 and WP26 TIG welding torches to hold the Tungsten as you weld
Features and Benefits
• An economical way to keep your TIG torch operating to its full potential
• Manufactured to a high standard to ensure a steady current and provide a stable arc needed for precision welding
• Available in various sizes to ensure you find the correct fit for your torch
Typical Applications
• Ideal for use with WP17, WP18 and WP26 TIG welding torches to hold the Tungsten as you weld