The WeldSkill 155 is a self-contained single phase welding inverter, capable of performing MIG (FCAW/GMAW), Stick (MMAW) and Lift TIG (GTAW) welding processes.
• MIG, STICK, TIG Welding Inverter
• Plug & Play – runs on any 10 Amp power point
• Digital Amperage and Voltage Meters
• Designed specifically for the home handyman/tradesman
• 2-Year Warranty

This unit is compact, portable, and simple to use, making the ideal welder for those who want to do light fabrication, maintenance and repairs or DIY projects, without compromising on quality or safety.
Ready to plug & play, the WeldSkill 155 is fitted with a 10Amp plug, so you can plug in and weld – anytime, anywhere.

CONTENTS:
• WeldSkill 155 Power Source (13.7kg)
• E-180 MIG Torch with Euro Connection, 3m
• Twistlock Electrode Holder with 3m Lead
• CutSkill Argon Regulator/Flowmeter
• Work Clamp with 3m Lead
• Shielding Gas Hose Assembly, 3m
• Feed Rolls: 0.8/0.9mm Flux Cored (Fitted), 0.8/0.9mm V Groove
• Contact Tip: 0.8mm (Fitted)
• Operating Manual

Easy setup and usage in the use of various types of materials (steel, stainless steel, aluminium) and in all possible applications, from maintenance to installation works. Fit for NO GAS/Flux welding, it can be transformed into Mig-Mag with the optional Gas Connection kit (KEN8852400K).

• Capable of welding up to 8mm material.
• Capable of using 0.6 - 0.9mm wires including flux cored.
• Polarity reversal for GAS Mig-Mag/Brazing welding
• Compact & light
• Microprocessor controlled
• Easy to use & excellent results
• Gas / Gasless and Brazing capabilities
• Generator safe
• Thermal overload switch

When it comes to portable welders, the ESAB Rebel EMP 235ic is packed with the power to weld up to a half-inch on mild steel, measuring in at 235A at 20%. You have the ability to weld a wide range of metal thicknesses and applications, including the full range of 0.9 in both short arc and spray arc transfer, up to 1.0 solid wires, and up to 1.2 cored wires. Plus, ESAB Rebel EMP 235ic can also weld Stick rods up to 4mm and TIG rods up to 4.8mm.

Whether you have been welding for two years or 20, ESAB Rebel 235ic can make your job easier with sMIG (smartMIG). For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.

You’re on-site, out in the field, and in the shop. You need a machine that can go where you go and withstand the harsh environments you face. Rebel can. With a sturdy multi-handle roll cage, steel unibody construction, and IP23S-level protection, Rebel’s rugged exterior gives you the confidence to go where you need to go without fear.
The Rebel is a true Multi-Process inverter with professional-grade MIG performance, including flux-cored, Excellent MMA performance, including stainless steel, 6010 and 6011 cellulosic and 308L electrodes
• Exceptional lift TIG performance down to 5A

Designed to hold Tungsten electrodes and transfer current whilst using your TIG torch, these collets are ideal for use on WP17, WP18 and WP26 torches. Available in varying sizes to suit your required wire size, they are crucial in upholding the quality of your TIG welding torch.

Features and Benefits
• An economical way to keep your TIG torch operating to its full potential
• Manufactured to a high standard to ensure a steady current and provide a stable arc needed for precision welding
• Available in various sizes to ensure you find the correct fit for your torch

Typical Applications
• Ideal for use with WP17, WP18 and WP26 TIG welding torches to hold the Tungsten as you weld