CRC Brakleen® Brake Parts Cleaner, 19 Wt Oz 05089

Maintaining clean brake and disc parts can improve the life of your car's braking system and keep you safe on the roads. Using a brake cleaner for cleaning and degreasing is a great way to maximize the performance and increase the longevity of your entire brake system. While there are several brake cleaners on the market, not all can guarantee the cleaning power and effectiveness you need. CRC Brākleen® has consistently been a top choice of automotive professionals for the past 50 years.

Applications
ABS, disc, drum, brake cylinders, brake drums, brake linings, brake shoes, calipers, clutch discs, disc brake pads, discs. Safe for use on all brake systems including: Springs & Wedge brakes

The Original
CRC Brākleen® Brake Parts Cleaner is our original formula. It uses a potent solvent that cleans and dries fast to remove contaminants and leaves no residue. The strength of the formula means it requires very little dwell time to break down grease and grime in your brake systems. The high-quality and fast-acting features of this cleaning solution combine to deliver a brake cleaning experience that customers prefer.

Effective Brake Cleaning
Brake systems parts are among the auto parts that require the most frequent cleaning. Grease, brake dust, fluid, and oils accumulate over time and can cause premature wear and lower brake performance. The formula restores brake performance and eliminates squeaks and squeals. It uses a carbon dioxide propellant and will not corrode components. It is designed for the ABS, brake disc, brake drum and cylinders, linings, calipers, brake shoes, clutch discs, brake pads, and more.

Simple to Use, Easy to See Results
Using Brākleen® is simple and effective. Just spray from about two feet away and let the solvent do its job. The formula is non-flammable and is safe to use on all components of your brake system. Avoid applying to plastic or rubber parts, and always be sure to wear gloves when using the product. Brākleen® comes in a 19-ounce aerosol can and is available for use in 48 states.Get rid of dirt, oils, grease, and other contaminants using CRC Brākleen® Brake Parts Cleaner. CRC is the #1 brand in brake cleaner worldwide, with years of experience providing safe, reliable products.

Download

Produk Lainnya

Kennedy 1200mm Wrecking Bar, Steel, 42mm Width

Suited primarily for heavy duty work, this range of chisel and point ended crowbars are manufactured from heat treated carbon steel. Ideal for dismantling timber constructions, opening packing cases and removing nails, each product is multi-purpose with one chisel end and one point end.

Features and Benefits
• Manufactured from carbon steel for durability
• Heat treated to further bolster product strength
• One chisel end and one point allows for varying applications and makes for a versatile product
• Available in three sizes to ensure you find the correct product for your needs

Typical Applications
• Ideal for heavy duty use including dismantling timber constructions, opening packing cases and removing nails (depending on the type of bar)

Kennedy 3/4in. Torque Wrench, 200 to 800Nm

Kennedy® mechanics torque wrench is chrome plated with a polished steel head and retractable torque setting lever. "Click & Snap" action indicates when the pre-set torque level has been reached. Push through square drive connector instantly reverses the action for quick and simple operation.

Features and Benefits
• Available in a variety of sizes to suit your requirements
• Repeatable accuracy of +/- 4% for precise turning
• Manufactured from steel and chrome plated for durability and resistance to corrosion
• Easily reversed via the push through connector
• 4 easy read scales (Nm, kgf.m, lbf.in x 10, lbf.ft.) for versatility of measuring
• Supplied with factory tested calibration certificate

Typical Applications
• Construction
• Engineering
• Automotive

Standards
• ISO 6789-2:2017 & ASME B107.14M-2004
• ASME B107.14M-2004
• DIN ISO6789

Kennedy Dead Blow Hammer, 45oz., Steel Shaft, High Impact

With solid steel bar shaft and hollow head. Inside the polyurethane moulded hammerhead are thousands of steel pellets that impact a split second after the hammer face, reducing rebound whilst also adding to the force of the blow. The SafeBlower™ design makes the product safe for use with more delicate workpieces as well as for assembly work. Available in a variety of sizes and specifications to suit the user's needs.

Features and Benefits
• Solid steel bar shaft is durable
• Shafts are textured for additional grip and control of the tool
• Shot filled polyurethane head reduces rebound and bounceback
• Steel pellets inside the head also bolsters the strength of the blow delivered

Typical Applications
• Automotive
• DIY
• Workshops

Notes
• Head diameter is +/-3mm

Kennedy Double End, Combination Spanner, 18mm, Metric

Manufactured from chrome vanadium steel with a chrome satin finish body and highly polished heads, this range of metric sized combination spanners are the ideal product for professionals and DIY enthusiasts alike. With a 15° open jaw angle to shank and ring end offset with a head angle of 13°, each product is chrome plated to aid in the prevention of corrosion. Available in a variety of sizes and specifications to suit your needs.

Features and Benefits
• Manufactured from chrome vanadium steel for resilience and quality performance over time
• Chrome plated satin finish to bolster resistance to wear and tear as well as corrosion
• Highly polished heads make easy work of even the tightest bolts
• Available to purchase in a variety of sizes and specifications to ensure you choose the correct size for your requirements

Typical Applications
• Ideal for use by professionals such as mechanics, plumbers, electricians, engineers, mechanics, general purpose handiwork and DIY enthusiasts

Standards
• Conform to DDIN 3113

CRC Brakleen® Brake Parts Cleaner, 19 Wt Oz 05089

Informasi Pemesanan