Tools & Chemicals
Kennedy Roller Cabinet, Industrial Range, Red, 7 Drawers, (H) 844mm x (W) 461mm x (L) 706mm
This range of industrial roller cabinets feature a modern design that's sturdy, stylish and secure. This range has been made with the heavy industrial user in mind. It features full width top chests and full height cabinets with alloy style castors. Made from robust steel with inner walls and reinforced back panels, all units are finished with anti-rust and solvent resistant powder coat paint. All corners are angled to maintain product shape and offer cabinet protection during repositioning. This range features fully opening drawers with classic design pulls to allow easy access.
Features and Benefits
• Anti-rust and solvent resistant powder coat finish protects against incidental damage
• Perforated sides optimise space with easy to install accessories
• Steel inner walls for added strength and extra rigidity
• Non-slip EVA top mat and liners prevent damage and protect tools
• Fully opening drawers with magnets to secure them in place
• 45mm Ball bearing slides give good drawer stability and smooth action even under load
• Greater security due to the locking system with cylinder locks
• Increased mobility thanks to the strong ergonomic side handle, which can fit to either side of the unit to facilitate easy repositioning
• 125mm diameter castors with lockable brakes absorb shock and can support heavy loads
• Enhanced safety via the spring loaded catches prevent drawers opening when repositioning
• Available in varying sizes to suit your requirements
Typical Applications
• Workshops
• Garages
• Industrial
Features and Benefits
• Anti-rust and solvent resistant powder coat finish protects against incidental damage
• Perforated sides optimise space with easy to install accessories
• Steel inner walls for added strength and extra rigidity
• Non-slip EVA top mat and liners prevent damage and protect tools
• Fully opening drawers with magnets to secure them in place
• 45mm Ball bearing slides give good drawer stability and smooth action even under load
• Greater security due to the locking system with cylinder locks
• Increased mobility thanks to the strong ergonomic side handle, which can fit to either side of the unit to facilitate easy repositioning
• 125mm diameter castors with lockable brakes absorb shock and can support heavy loads
• Enhanced safety via the spring loaded catches prevent drawers opening when repositioning
• Available in varying sizes to suit your requirements
Typical Applications
• Workshops
• Garages
• Industrial
Download
Produk Lainnya
This range of bi-hexagonal ring ratchet spanners are a staple of any complete toolbox. Manufactured from chrome vanadium steel with a mirror polish finish, making for easier cleaning and preventing rust. The 72-teeth ratcheting system needs only 5° movement to operate the ratchet, making it ideal even in tight spots. Complete with a thin wall design to further allow access into confined areas. Available to purchase in various sizes to allow you to select the product that best suits your needs.
Features and Benefits
• Manufactured from vanadium steel for durability and overall product longevity
• Chrome plated mirror finish prevents dirt and oil attracting to the spanner
• Ratcheting system requires only 5° movement to operate for use even in confined spaces or awkward angles
• Thin wall design allows for greater access to hard to reach areas
Typical Applications
• Ideal for use by professionals such as mechanics, plumbers, engineers, electricians, general handiworkers and DIY enthusiasts
Standards
• Conforms to ASME B107.6
Features and Benefits
• Manufactured from vanadium steel for durability and overall product longevity
• Chrome plated mirror finish prevents dirt and oil attracting to the spanner
• Ratcheting system requires only 5° movement to operate for use even in confined spaces or awkward angles
• Thin wall design allows for greater access to hard to reach areas
Typical Applications
• Ideal for use by professionals such as mechanics, plumbers, engineers, electricians, general handiworkers and DIY enthusiasts
Standards
• Conforms to ASME B107.6
For use with regular hex and bi-hex sockets, the fifty piece side drive socket set from Kennedy® provides every size socket you'll ever need. Made from high-quality chrome vanadium steel, all tools are corrosion resistant and will provide a long service life.
Features and Benefits
• Grips nuts and bolts which are up to 95% rounded off
• Will not damage new, worn or rusted nuts and bolts
• Fits a wide range Metric, UNC, UNF, BSW, BSF and E-Torx® sizes
• Unique 'Double-Knurl' for high grip
• Chrome Vanadium Side Drive Socket Sets
• Fully chrome plated finish for easy clean
Contents
• Standard Sockets: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm
• Deep Sockets: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm, 22mm
• Screwdriver Bits: Slotted 5mm, 5.5mm, 6.5mm
• Crosspoint No.1, 2, 3, 4
• Hexagon Sockets: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
• 1x ratchet handle
• 1x sliding T-handle
• 1x spinner handle
• 1x swivel handle
• 1x universal joint,
• 125mm and 250mm extensions
• 250mm wobble extensions
• 1/4" and 1/2" male adaptors
• 1/4" socket bit coupler
• Robust fitted case with security padlock hole and cushion grip handle
Features and Benefits
• Grips nuts and bolts which are up to 95% rounded off
• Will not damage new, worn or rusted nuts and bolts
• Fits a wide range Metric, UNC, UNF, BSW, BSF and E-Torx® sizes
• Unique 'Double-Knurl' for high grip
• Chrome Vanadium Side Drive Socket Sets
• Fully chrome plated finish for easy clean
Contents
• Standard Sockets: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm
• Deep Sockets: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm, 22mm
• Screwdriver Bits: Slotted 5mm, 5.5mm, 6.5mm
• Crosspoint No.1, 2, 3, 4
• Hexagon Sockets: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
• 1x ratchet handle
• 1x sliding T-handle
• 1x spinner handle
• 1x swivel handle
• 1x universal joint,
• 125mm and 250mm extensions
• 250mm wobble extensions
• 1/4" and 1/2" male adaptors
• 1/4" socket bit coupler
• Robust fitted case with security padlock hole and cushion grip handle
This pack of 10 scraper blades are suited for product KEN5331100K. Simple and economical way of ensuring high quality results every time.
Features and Benefits
• Pack of 10 ensures you have an ample amount of spares to hand
• Simple yet effective way of keeping your scraper tool working to an optimum
• Blades are manufactured from steel for durability
Typical Applications
• Used as replacement blades for product KEN5331100K
Features and Benefits
• Pack of 10 ensures you have an ample amount of spares to hand
• Simple yet effective way of keeping your scraper tool working to an optimum
• Blades are manufactured from steel for durability
Typical Applications
• Used as replacement blades for product KEN5331100K
Made from chrome vanadium steel with a satin finish body and highly polished heads, with a double ended closed jaw bi-hexagon offset. Available in a range of sizes, the product is suited for industrial use in a range of industries.
Features and Benefits
• Available in a range of metric sizes to suit your needs
• Manufactured from chrome vanadium steel for optimum durability and product longevity
• Satin finish further protects the product against corrosion and wear and tear
• Double ended offset bi-hexagonal ring for easy turning of fasteners
• Highly polished head ensures accurate turning and repels dirt and grime
Typical Applications
• Automotive
• Engineering
• DIY
• Plumbing
Standards
• DIN 838
Features and Benefits
• Available in a range of metric sizes to suit your needs
• Manufactured from chrome vanadium steel for optimum durability and product longevity
• Satin finish further protects the product against corrosion and wear and tear
• Double ended offset bi-hexagonal ring for easy turning of fasteners
• Highly polished head ensures accurate turning and repels dirt and grime
Typical Applications
• Automotive
• Engineering
• DIY
• Plumbing
Standards
• DIN 838