Tools & Chemicals
Kengrip 3/8in. Socket Set, Metric, Set of 50
For use with regular hex and bi-hex sockets, the fifty piece side drive socket set from Kennedy® provides every size socket you'll ever need. Made from high-quality chrome vanadium steel, all tools are corrosion resistant and will provide a long service life.
Features and Benefits
• Grips nuts and bolts which are up to 95% rounded off
• Will not damage new, worn or rusted nuts and bolts
• Fits a wide range Metric, UNC, UNF, BSW, BSF and E-Torx® sizes
• Unique 'Double-Knurl' for high grip
• Chrome Vanadium Side Drive Socket Sets
• Fully chrome plated finish for easy clean
Contents
• Standard Sockets: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm
• Deep Sockets: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm, 22mm
• Screwdriver Bits: Slotted 5mm, 5.5mm, 6.5mm
• Crosspoint No.1, 2, 3, 4
• Hexagon Sockets: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
• 1x ratchet handle
• 1x sliding T-handle
• 1x spinner handle
• 1x swivel handle
• 1x universal joint,
• 125mm and 250mm extensions
• 250mm wobble extensions
• 1/4" and 1/2" male adaptors
• 1/4" socket bit coupler
• Robust fitted case with security padlock hole and cushion grip handle
Features and Benefits
• Grips nuts and bolts which are up to 95% rounded off
• Will not damage new, worn or rusted nuts and bolts
• Fits a wide range Metric, UNC, UNF, BSW, BSF and E-Torx® sizes
• Unique 'Double-Knurl' for high grip
• Chrome Vanadium Side Drive Socket Sets
• Fully chrome plated finish for easy clean
Contents
• Standard Sockets: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm
• Deep Sockets: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm, 22mm
• Screwdriver Bits: Slotted 5mm, 5.5mm, 6.5mm
• Crosspoint No.1, 2, 3, 4
• Hexagon Sockets: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
• 1x ratchet handle
• 1x sliding T-handle
• 1x spinner handle
• 1x swivel handle
• 1x universal joint,
• 125mm and 250mm extensions
• 250mm wobble extensions
• 1/4" and 1/2" male adaptors
• 1/4" socket bit coupler
• Robust fitted case with security padlock hole and cushion grip handle
Download
Produk Lainnya
These rubber-headed mallets possess a soft face for use where steel hammers would mark the surface. They are ideal for providing a gentle but firm blow with little rebound. Completed with a solid hickory shaft. High-quality all-purpose mallets used widely for automotive, industrial, DIY and camping.
Features and Benefits
• Solid hickory shaft is resilient and resistant to general wear and tear
• Rubber head delivers a firm blow whilst minimising damage to the workpiece
• Little rebound to maximise user safety
• Available in varying sizes to suit your requirements
Typical Applications
• Automotive
• General Assembly
• DIY
• Industrial
• Camping
Features and Benefits
• Solid hickory shaft is resilient and resistant to general wear and tear
• Rubber head delivers a firm blow whilst minimising damage to the workpiece
• Little rebound to maximise user safety
• Available in varying sizes to suit your requirements
Typical Applications
• Automotive
• General Assembly
• DIY
• Industrial
• Camping
Manufactured from chrome vanadium steel with a chrome satin finish body and highly polished heads, these combination spanners are ideal for professional use. Each product possesses a 15° open jaw angle to shank and ring end offset and has a chrome plated finish to prevent corrosion. Available in a range of AF sizes.
Features and Benefits
• Manufactured from chrome vanadium steel for resilience
• Chrome satin finish and chrome plating protects against corrosion
• Available in a variety of sizes to suit your exact needs
• 15° open jaw angle to shank and ring end offset allows for maximum access in even restricted spaces
• One ring end and one open end allows for versatility of use
Typical Applications
• Automotive
• Construction
• Plumbing
• DIY
Standards
• 1/4in. - 1in. AF Conforms to DIN 3113
• 11/16in. - 2in. AF Confroms to ASME B107.6
Features and Benefits
• Manufactured from chrome vanadium steel for resilience
• Chrome satin finish and chrome plating protects against corrosion
• Available in a variety of sizes to suit your exact needs
• 15° open jaw angle to shank and ring end offset allows for maximum access in even restricted spaces
• One ring end and one open end allows for versatility of use
Typical Applications
• Automotive
• Construction
• Plumbing
• DIY
Standards
• 1/4in. - 1in. AF Conforms to DIN 3113
• 11/16in. - 2in. AF Confroms to ASME B107.6
With both metric and imperial sizes, this 20 piece set of hexagon keys is the cost effective way of ensuring you always have the correct size hex key for any application. Manufactured from high grade chrome vanadium steel to international standards ISO 2936 an DIN 911, the high quality products are supplied in a tough ABS plastic case for easy storage and selection of tool when on a job. Set supplied with 10 metric sized hex keys and 10 imperial.
Features and Benefits
• Manufactured from high grade carbon steel
• 20 piece set ensures you have the correct size hexagon key to hand for a host of applications
• Supplied in a durable ABS plastic case to easily store, organise and transport your products
Contents
• Metric: 1.5, 2, 2.5, 3, 4 , 5, 6, 7, 8 and 10mm
• Imperial: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16" and 3/8"
Typical Applications
• Ideal for use when fastening or loosening any hex head bolt or screws which are commonly found in furniture and bicycles
Standards
• ISO 2936 & DIN 911
Features and Benefits
• Manufactured from high grade carbon steel
• 20 piece set ensures you have the correct size hexagon key to hand for a host of applications
• Supplied in a durable ABS plastic case to easily store, organise and transport your products
Contents
• Metric: 1.5, 2, 2.5, 3, 4 , 5, 6, 7, 8 and 10mm
• Imperial: 1/16", 5/64", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16" and 3/8"
Typical Applications
• Ideal for use when fastening or loosening any hex head bolt or screws which are commonly found in furniture and bicycles
Standards
• ISO 2936 & DIN 911
This range of ball pein hammers have been manufactured from high-grade drop forged steel that has been fully heat-treated. Ideal for use with cold chisels, punches, rivets and for the shaping of metal. With fine grain, forged steel head, hardened and tempered with polished faces complete by a hardwood shaft. Available in varying sizes to suit your needs.
Features and Benefits
• Manufactured from drop forged high grade steel making for a robust product
• Head is heat treated for durability
• Solid wooden handle for bolstered grip and control when wielding
Typical Applications
• Ideal for use with cold chisels, punches, rivets and for the shaping of metals
Features and Benefits
• Manufactured from drop forged high grade steel making for a robust product
• Head is heat treated for durability
• Solid wooden handle for bolstered grip and control when wielding
Typical Applications
• Ideal for use with cold chisels, punches, rivets and for the shaping of metals