Drager X-act® 7000

The innovative Dräger X-act® 7000 analysis system consists of Dräger MicroTubes and an opto-electronic analysis device that lets you precisely measure gases in the low ppb range. It gives you precise results right on site, replacing slow, expensive lab analyses. It's extremely easy to use: insert the Dräger MicroTubes, start measuring, then read out the test result.

Measures the lowest-quantity concentrations with lab-quality analysis
Concentrations of hazardous substances in ambient workplace air must never exceed the defined limits. Monitoring these sometimes very low concentration levels is a responsible task. The Dräger X-act 7000 in combination with Dräger MicroTubes is focussed on measuring carcinogenic and toxic substances in the low ppb range. This sensitive testing system is based on colorimetric chemical sensors. These are capable of replacing conventional laboratory analysis and providing precise results right on site. This saves time and money.

More safety thanks to high selectivity
The substance-specific reactive layers and multiple pre-layers in the Dräger MicroTubes allow for selective gas testing. The various layers serve as a filter, for example. During testing, they filter out other substances that occur in the workplace so that only the target substance is reflected in the test result. This greatly eliminates cross-sensitivities and reduces the number of false-positive test results and false alarms.

Explosion-proof and ready to use
The RFID tags applied to the Dräger MicroTubes contain all the calibration data that apply throughout their normal lifespan of one year. This eliminates the need for lengthy function tests and manual calibration. Because it works on the basis of mass-flow measurement, air pressure fluctuations have no influence on the device. Any possible temperature or humidity influences are already accounted for during the factory calibration. The analyser is explosion-proof and certified under ATEX/IECEx for Zone 0. The system is also dust- and splash-resistant in accordance with IP54. It also meets the requirements for electromagnetic compatibility under EN 61326-1.

Easy to use
After an automatic self-test, the X-act 7000 analysis system is immediately ready for use. It is suitable for testing with all available Dräger MicroTubes. Simply insert the right Dräger MicroTube for your testing needs. The automatic drive carefully draws the MicroTube in and positions it. Control your test using the 3-button control and 2.4 inch colour display. When the test is complete, the green LED will glow and a message is displayed on the screen. You can store the test result, location and time in the internal data logger and read it later using the Dräger CC Vision software. The device is powered by five easily replaceable standard batteries. The life time of the recommended batteries lasts for more than ten hours of testing and can be read on the display.

Also suitable for pump-assisted testing
Using the coupler (connector piece), the Dräger X-am® Pump can be adapted to the X-act 7000. This allows you to test for carcinogenic and toxic substances in the ppb range, even in hard-to-reach places like ducts, pipelines or tanks up to a distance of 45 metres (147.6 feet). Because the X-am Pump is also certified explosion-proof for Zone 0, it is perfectly suited for these tasks.

Download

Produk Lainnya

Halo Mechanical Hazard Gloves, Black, Nylon Liner, Polyurethane Coating, EN388: 2016, 4, 1, 4, 1, X, Size 8

These PU Coated Nylon Lined Gloves from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.

These nylon-lined gloves are polyurethane coated on the palm and offer dexterity and comfort when handling an array of components. Available in a wide range of sizes and colours to suit your exact needs.

Features and Benefits
• 13 gauge seamless nylon liner allows for excellent dexterity and protection as well as comfort
• Polyurethane (PU) coated palms ensure great dexterity even when dry or slightly damp
• Knitted wrists prevent the ingress of dirt and debris
• Colour-coded binding for easy size identification
• Available in white, grey, or black to suit your preferences
• Available in a wide range of sizes to suit your needs

Standards
• Halo® products are BSI tested
• EN 388:2016 4.1.4.1.X.

Milwaukee Cut Level 5 Dipped Gloves

48-22-8951
• SMARTSWIPE™ palm and fingertips permits the use of touch screen devices without removing gloves
• Double dipped nitrile grip for best in class protection and durability
• Nylon & HPPE liner material

Gastron Smart Diffusion Flammable Gas Detector / GTD-2000Ex

- Continuous detection of flammable gases in explosion hazardous area with flame proof structure
- Self diagnosis function with built-in Microprocessor
- Detection gas from low to high concentration owing to various detection principle
- Stable quality and proved detection principle for service life
- Built-in back light LCD or OLED display
- Easy Configuration of monitoring by HART communication
- Auto calibration and program setting with a magnet bar
- 4-20mA (Current source or Sink) output signal
- Calibration and maintenance by one-man
- With the alarm unit (GTL-100):
- Normal : Green LED
- Alarm : Red LED, Buzzer(95 dB)
- Trouble : Yellow LED

Drager GS3

Locating leaks often proves to be very demanding due to locations that are difficult to access. This is where the Dräger GS3 leakage detector comes in: as it is no larger than a ballpoint pen, even hard-to-reach places are no problem. The detector for flammable gases such as natural gas, liquefied petroleum gas and hydrogen detects even the smallest of leaks, indicated by a visual and acoustic alarm signal.

Drager X-act® 7000

Informasi Pemesanan