Drager UCF® FireCore

The Dräger UCF® FireCore hands-free thermal imaging camera gives you a permanent vision of your immediate surroundings, even under the toughest conditions. That allows you to orientate yourself more quickly and safely, while also improving your situational awareness.

SAFETY+

Rapid assessment of the situation during firefighting
Especially during firefighting, difficult conditions such as fire, smoke and darkness prevail. The UCF® FireCore provides important orientation, helps to quickly assess the situation and thus identify potential hazards.

A clear view at all times
The FPS® in-mask display (FPS® IMD) is integrated into the Dräger FPS® 7000 full-face mask, so you have the thermal image in front of your eyes from the first second and at all times, and thus a permanent view of your surroundings, even under zero visibility conditions. This enables you to complete your mission with greater speed and safety.

Work with both hands free
The UCF® FireCore is ergonomically integrated into your PPE, so you do not have to hold the thermal imaging camera in your hand. That means you have both hands free to focus on what matters most: saving lives.

USABILITY

High level of flexibility
No matter whether you are crawling or climbing stairs, you always have a complete overview, because the camera angle is flexiby adjustable. This reduces physical strain, such as neck pain.

Thermal imaging camera is easily detachable
Especially when firefighting you often need to enter areas that are difficult to access. The UCF® FireCore makes it easier to manouevre, because you can simply detach it to capture a view of what is waiting in hard to reach areas. That gives you even better situational awareness.

Ease of use
The UCF® FireCore is very easy to handle and operate. It was designed for maximum usability. The UCF® FireCore is coupled with the FPS® IMD within a few seconds by briefly holding the two components next to each other. This also enables you to quickly hand over the thermal imaging camera to one of your teammates to use.

SERVICE

Tough and reliable on the job
You can rely on this durable camera even in the toughest conditions. With an IP67 rating, it is water and dust resistant under typical conditions. The UCF® FireCore is powered by lithium-ion batteries for long battery life. The batteries can easily be recharged either in a vehicle or at the fire station. The devices require minimal maintenance.

Modular design
The modular product concept allows for optimal adaptation to your operational tactics and budget. You can decide flexibly, based on your needs, which team member should be equipped with the FPS® in-mask display and also the UCF® FireCore.

Download

Produk Lainnya

Halo Mechanical Hazard Gloves, Black, Nylon Liner, Polyurethane Coating, EN388: 2016, 4, 1, 4, 1, X, Size 9

These PU Coated Nylon Lined Gloves from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.

These nylon-lined gloves are polyurethane coated on the palm and offer dexterity and comfort when handling an array of components. Available in a wide range of sizes and colours to suit your exact needs.

Features and Benefits
• 13 gauge seamless nylon liner allows for excellent dexterity and protection as well as comfort
• Polyurethane (PU) coated palms ensure great dexterity even when dry or slightly damp
• Knitted wrists prevent the ingress of dirt and debris
• Colour-coded binding for easy size identification
• Available in white, grey, or black to suit your preferences
• Available in a wide range of sizes to suit your needs

Standards
• Halo® products are BSI tested
• EN 388:2016 4.1.4.1.X.

Halo Safety Helmet With 6 Point Harness, White, ABS, Vented, Reduced Peak, Includes Side Slots

These C6 ABS 6 Point Harness Helmets from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce, and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.

The Halo® range of short peak side vented safety helmets have been designed with comfort and performance in mind. Available in a range of colours, each safety helmet is manufactured from ABS plastic with a 6-point textile suspension harness and fleece sweatband.

Both practical and stylish, these helmets are designed to protect personnel whilst on site. Each helmet also includes a rain gutter and slots for hearing or eye protection accessories.

Features and Benefits
• 6-point textile suspension harness for comfortable wear
• Washable fleece sweatband keeps sweat out of the eyes and off the face
• Manufactured from ABS plastic for resilience and product longevity
• 12 ventilation holes maintain airflow and wearer comfort
• Ratchet adjustable headband for easy fitting
• 4-point self-releasing chin strap mounts for optionally secured fitting
• Slots (30mm) for hearing or eye protection accessories
• Rain gutter prevents the collection and draining of water onto the wearer
• German manufactured for a lower carbon footprint
• Available in a range of colours to suit your needs

Standards
• Halo® products are BSI tested
• EN 397:2012 + A1:2012

Drager UCF® FireVista

Small, light, robust and can be operated with just one button: The compact thermal imaging camera Dräger UCF® FireVista provides excellent picture quality even under the most difficult operating conditions. The camera is ready for immediate use and provides the best possible support on firefighting deployments. Outstanding quality – especially in the price.

Summitech N102FT-PF

PRODUCT CODE : N102FT-PF
COATING MATERIAL : Nitrile, Powder Free
LINEAR MATERIAL : N/A
EXTERIOR FINISHING : N/A
CUFF STYLE : Beaded
THICKNESS MM : 0.07
LENGTH MM : 240
COLOUR : Violet Blue/Blue
SIZE/WRIST : S, M, L, XL
PACKAGING : 100 pieces in a dispenser box 10 dispenser boxes in a master carton

Drager UCF® FireCore

Informasi Pemesanan