The Dräger RPS 3500 Rescue Pack System is designed for use by rapid intervention teams, allowing fire fighters to supply air to trapped colleagues or members of the public in hazardous atmospheres.
Functional system bag for the toughest missions The Dräger RPS 3500 is accommodated in a completely padded and particularly hard-wearing system bag. This ensures the protection of the air cylinder against impact. The multifunctional shoulder strap provides high wearing comfort.
Well-proven Dräger PAS pneumatics The advantages of the well-proven PSS® systems are also evident for the PAS pneumatics used for the Dräger RPS 3500. Combining a warning whistle and a precision pressure gauge, offering a particularly compact and robust design. The Y-piece provides for simultaneous connection of lung demand valves and / or PSS Rescue Hoods. The especially compact pressure reducer, which is connected directly to the air cylinder, is a standard.
Compressed air cylinders The Dräger RPS 3500 allows the connection of 300 bar CFK cylinders with a capacity of 6 to 9.0 litres.
Reinforced base The reinforced base of the Dräger RPS 3500 means it is robust enough to withstand the toughest of operational conditions.
Easy to operate coupling The medium pressure couplings of the Y piece are easy to operate even under pressure. During operation, this allows attachment or detachment of a second connection without difficulty. For strain relief, the carabiner can be fixed to the wearer.
Ready for use Optionally, the RPS 3500 Rescue Pack System allows the use of the Dräger PSS® Rescue Hood. This is especially useful for people in danger who are not already wearing full face masks.
Storage bag Apart from the system components, other useful accessories can be accommodated in the holdall. The long compartment at the top opens quickly and easily so that accessories, such as the rescue hood or a carrying sheet, are always within reach.
The Dräger PointGard 2720 is a self-contained gas detection system for the continuous area monitoring of carbon dioxide (CO2) in ambient air. PointGard 2720’s rugged, water-resistant housing comes complete with a horn and strobes, a built-in power supply, and is compatible with a remotely mounted Dräger PIR 7200 infrared CO2 sensor.
- Continuous detection of toxic gases and oxygen in explosion hazardous area with flame proof structure - Self diagnosis function with built-in Microprocessor - Excellent selectivity by adapting detection principle only for toxic gases & oxygen - Stable quality and proved detection principle for service life | Built-in back light LCD or OLED display - Auto calibration and program setting with a magnet bar - 2-stage alarm, 1-trouble display and relay contact output - 4-20mA (Current source or Sink) output signal - Easy configuration of monitoring system by RS-485 Modbus communication - With the alarm unit - Normal : Green LED -Alarm : Red LED, Buzzer(95 dB) - Trouble : Yellow LED - Calibration and maintenance by one-man - Superior performance for detecting gases below TLV
These Heavy-Duty Grey Leather Welding Gauntlets from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce, and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.
Heavy-duty leather welding gauntlets offer a superb feel and good durability for repeated use when precision welding.
Features and Benefits • Designed for comfort and dexterity • Nappa leather palm and stiff 150mm chrome leather cuff for excellent durability • Slip on cuff style for easy donning and doffing as needed • Fully coated for all-over protection when working • 360mm overall length for further arm protection
Standards • Halo® products are BSI tested • EN 388:2016 1.1.1.1.X. • EN 420 (Dexterity) Level 5 • CE approved to EN12477 Type B (new standard supersedes EN407, EN388, EN420 & EN1149-2) • CAT II
These Yellow PU Ear Plugs from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce, and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.
These disposable ear plugs deliver comfortable hearing protection without impairing normal communication. The tapered design makes for easy fitting and forms an excellent seal.
Features and Benefits • Soft PU foam is comfortable in the ear canal • Tapered design ensures an easy fit and a tight, protective seal • Slowly expands after insertion to help keep the ear plugs in place • Supplied as a pack of 200 pairs to ensure you have an ample amount for all personnel • Available in both corded and uncorded designs to suit your needs
Standards • Halo® products are BSI tested • EN 352-2:2002 • CAT III