Drager PSD 3000

The Dräger PSD 3000 is a sampling unit for continuous sampling of gas and air mixtures. Combined with Dräger Gas Detectors, the Dräger PSD 3000 serves as a sampling system for gas monitoring purposes. The internal vibrating diaphragm pump has a superior life expectancy, due to the lack of rotating parts.

Dräger PSD 3000
The PSD 3000 can be used for most industrial gases. An electronic circuit monitors the flow rate internally and advises if the flow rate in the input line falls below a predefined minimum threshold. The device offers a flexible programmable messaging of the low-flow signal to the control system.

Fast and easy installation
The sampling unit can be placed either before or behind a gas transmitter depending on application requirements. Two instant tube fittings allow a fast and easy connection of stiff sample lines without tools or manual force. Electrically the sampling unit is installed between the gas transmitter and the central control system. There are cable glands and terminals provided for the respective connections. The 4 to 20 mA signal from the transmitter as well as a separate 24 V wire can be passed through the sampling unit.

Operation
A multicoloured LED indicates the operational status of the device. The LED indicates conditions such as normal operation, a blocked sampling line or a broken supply voltage connection. The flow rate of the sampling line can be adjusted internally to adapt to special needs in certain circumstances. A dust filter protects the sampling pump from dust and aerosols.

Low-flow monitor
The PSD 3000 generates a signal in case the flow in the inlet line drops below a predefined value. This signal can alternatively be transmitted via the 4 to 20 mA line to the control system or by a separate switching contact. The latter option is useful if a digital communication between the transmitter and the controller should be maintained during a low-flow condition. In addition the operation LED indicates with a red colour that the lowflow condition has been triggered.

Download

Produk Lainnya

Drager PARAT® 3260

The Dräger PARAT® 3260 is a mouthpiece / nose clip escape device equipped with a multi-gas ABEK15 filter. Approved to the only recognized standard for filtering industrial escape devices (DIN 58647-7), it provides users a minimum of 15 minutes escape time. Compared to PARAT® 3200, the device and filter are vacuum sealed in an aluminum barrier bag, making it better suited for diverse climate zones.

Drager Alcotest® 6820

Keeping the roads safe and free of impaired drivers is an unpredictable and high stress job. Dräger designed the Alcotest® 6820 handheld breathalyzer specifically for the needs of law enforcement officers. It’s easy to use and provides fast, reliable results in the toughest environments you face when every second matters.

Drager Comfort Vest

Increased performance by up to four hours – without the need for elaborate preparation or logistics: when work gets hot, the Dräger Comfort Vest CVP 5220 is always ready to use as it delivers the cooling action itself. This means: no pre-freezing, no dipping into water, no risk due to dangerous circulating air – and no time loss.

Drager X-plore® 6530

The full face mask Dräger X-plore® 6530 is the successor to the Panorama Nova® RA masks, meeting the highest demands for quality, reliability and secure fit. The mask body made from EPDM is highly resistant and skin-friendly, offering high wearing comfort.

Drager PSD 3000

Informasi Pemesanan