Safety & PPE
Drager PAS® ASV
The Dräger Automatic Switch over Valve (PAS® ASV) enables the user to connect compressed air breathing apparatus to an external air supply, such as a factory ring main, and be safe in the knowledge that if the external supply were to fail, there would be a safe and uninterrupted transition to the wearer’s back-up air supply.
Download
Produk Lainnya
These Heavy-Duty Grey Leather Welding Gauntlets from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce, and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.
Heavy-duty leather welding gauntlets offer a superb feel and good durability for repeated use when precision welding.
Features and Benefits
• Designed for comfort and dexterity
• Nappa leather palm and stiff 150mm chrome leather cuff for excellent durability
• Slip on cuff style for easy donning and doffing as needed
• Fully coated for all-over protection when working
• 360mm overall length for further arm protection
Standards
• Halo® products are BSI tested
• EN 388:2016 1.1.1.1.X.
• EN 420 (Dexterity) Level 5
• CE approved to EN12477 Type B (new standard supersedes EN407, EN388, EN420 & EN1149-2)
• CAT II
Heavy-duty leather welding gauntlets offer a superb feel and good durability for repeated use when precision welding.
Features and Benefits
• Designed for comfort and dexterity
• Nappa leather palm and stiff 150mm chrome leather cuff for excellent durability
• Slip on cuff style for easy donning and doffing as needed
• Fully coated for all-over protection when working
• 360mm overall length for further arm protection
Standards
• Halo® products are BSI tested
• EN 388:2016 1.1.1.1.X.
• EN 420 (Dexterity) Level 5
• CE approved to EN12477 Type B (new standard supersedes EN407, EN388, EN420 & EN1149-2)
• CAT II
These chrome leather welder's sleeves deliver optimum protection for the lower arm and elbow. Designed for durability with heavy-duty stitching, these sleeves can be used independently or in conjunction with an apron or other garment.
Features and Benefits
• Elasticated openings for a secure fit
• Durable material for protection during extended wear
• Spatter and tear-resistant to protect against industry specific hazards
Typical Applications
• Workshops
• Foundries
• On site
Standards
CE certified Category II
EN470-1
Features and Benefits
• Elasticated openings for a secure fit
• Durable material for protection during extended wear
• Spatter and tear-resistant to protect against industry specific hazards
Typical Applications
• Workshops
• Foundries
• On site
Standards
CE certified Category II
EN470-1
PRODUCT CODE : CN-F-07
COATING MATERIAL : Chloroprene + Nitrile
LINEAR MATERIAL : Flocklined
EXTERIOR FINISHING : Pebble
CUFF STYLE : Straight
THICKNESS MM : 0.35 ± 10
LENGTH MM : 345 ± 10
COLOUR : Tangerine Orange
SIZE/WRIST : 7, 8, 9, 10, 11
PACKAGING : Bulk - 12 pairs per inner polybag, Pack - pair packed 72 pairs in a master carton
COATING MATERIAL : Chloroprene + Nitrile
LINEAR MATERIAL : Flocklined
EXTERIOR FINISHING : Pebble
CUFF STYLE : Straight
THICKNESS MM : 0.35 ± 10
LENGTH MM : 345 ± 10
COLOUR : Tangerine Orange
SIZE/WRIST : 7, 8, 9, 10, 11
PACKAGING : Bulk - 12 pairs per inner polybag, Pack - pair packed 72 pairs in a master carton
The Dräger X-am® 3500 was especially designed for clearance measurements and personnel monitoring applications. The 1 to 4 gas detector reliably detects flammable gases and vapors as well as O2, CO, H2S, NO2 and SO2. The innovative signaling design and extensive range of accessories ensure optimum safety and easy handling.