Safety & PPE
ISC MX6 iBrid® Six-Gas Monitor
Take your gas detection capabilities to new heights with the MX6 iBrid®. With the ability to monitor up to six gases at once, 24 sensor options, and a robust list of configurable settings, the MX6 iBrid easily adapts to your safety needs.
Download
Produk Lainnya
- Continuous detection of VOC gas in explosion hazardous area with flame proof structure
- Self diagnosis function with built-in Microprocessor
- Low concentration VOC gas detection by PID sensor
- Stable quality and proved detection principle for service life
- Multi functions and high quality with low cost of ownership
- Built-in back light LCD or OLED display
- Easy Configuration of monitoring by HART communication
- Auto calibration and program setting with a magnet bar
- 4-20mA (Current source or Sink) output signal
- With the alarm unit - Normal : Green LED - Alarm : Red LED, Buzzer(95 dB)
- Trouble : Yellow LED
- 3-wire connection for signal & power
- Calibration and maintenance by one-man
- Self diagnosis function with built-in Microprocessor
- Low concentration VOC gas detection by PID sensor
- Stable quality and proved detection principle for service life
- Multi functions and high quality with low cost of ownership
- Built-in back light LCD or OLED display
- Easy Configuration of monitoring by HART communication
- Auto calibration and program setting with a magnet bar
- 4-20mA (Current source or Sink) output signal
- With the alarm unit - Normal : Green LED - Alarm : Red LED, Buzzer(95 dB)
- Trouble : Yellow LED
- 3-wire connection for signal & power
- Calibration and maintenance by one-man
PRODUCT CODE : CN-F-07
COATING MATERIAL : Chloroprene + Nitrile
LINEAR MATERIAL : Flocklined
EXTERIOR FINISHING : Pebble
CUFF STYLE : Straight
THICKNESS MM : 0.35 ± 10
LENGTH MM : 345 ± 10
COLOUR : Tangerine Orange
SIZE/WRIST : 7, 8, 9, 10, 11
PACKAGING : Bulk - 12 pairs per inner polybag, Pack - pair packed 72 pairs in a master carton
COATING MATERIAL : Chloroprene + Nitrile
LINEAR MATERIAL : Flocklined
EXTERIOR FINISHING : Pebble
CUFF STYLE : Straight
THICKNESS MM : 0.35 ± 10
LENGTH MM : 345 ± 10
COLOUR : Tangerine Orange
SIZE/WRIST : 7, 8, 9, 10, 11
PACKAGING : Bulk - 12 pairs per inner polybag, Pack - pair packed 72 pairs in a master carton
These Heavy-Duty Grey Leather Welding Gauntlets from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce, and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.
Heavy-duty leather welding gauntlets offer a superb feel and good durability for repeated use when precision welding.
Features and Benefits
• Designed for comfort and dexterity
• Nappa leather palm and stiff 150mm chrome leather cuff for excellent durability
• Slip on cuff style for easy donning and doffing as needed
• Fully coated for all-over protection when working
• 360mm overall length for further arm protection
Standards
• Halo® products are BSI tested
• EN 388:2016 1.1.1.1.X.
• EN 420 (Dexterity) Level 5
• CE approved to EN12477 Type B (new standard supersedes EN407, EN388, EN420 & EN1149-2)
• CAT II
Heavy-duty leather welding gauntlets offer a superb feel and good durability for repeated use when precision welding.
Features and Benefits
• Designed for comfort and dexterity
• Nappa leather palm and stiff 150mm chrome leather cuff for excellent durability
• Slip on cuff style for easy donning and doffing as needed
• Fully coated for all-over protection when working
• 360mm overall length for further arm protection
Standards
• Halo® products are BSI tested
• EN 388:2016 1.1.1.1.X.
• EN 420 (Dexterity) Level 5
• CE approved to EN12477 Type B (new standard supersedes EN407, EN388, EN420 & EN1149-2)
• CAT II
