Pump & Lubricants
Kennedy Hydraulic Nipple, 45°, 1/4"x19 BSP(T), Steel
For use with Kennedy grease guns and all other hydraulic grease equipment.
Download
Produk Lainnya
For use with Kennedy grease guns and all other hydraulic grease equipment.
Hot dip protective plastic coating moulds around the component or tool to provide 100% coverage and protect against impact and corrosion.
Features and Benefits
• Hot dip plastic coating moulds itself around the part to provide 100% coverage and protect against corrosion and impacts for up to ten years
• Easy part identity through the translucent coating
• Simple to remove by peeling off
• Once removed, leaves behind a thin oil film to provide short term protection against corrosion
• Removed coatings may be reused saving cost
Notes
• Each single block measures (L)-150mm (H)-50mm (W)-80mm
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)
Warnings
• Never directly apply heat to melt the protective dip
• Always use with a suitable melting pot
Features and Benefits
• Hot dip plastic coating moulds itself around the part to provide 100% coverage and protect against corrosion and impacts for up to ten years
• Easy part identity through the translucent coating
• Simple to remove by peeling off
• Once removed, leaves behind a thin oil film to provide short term protection against corrosion
• Removed coatings may be reused saving cost
Notes
• Each single block measures (L)-150mm (H)-50mm (W)-80mm
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)
Warnings
• Never directly apply heat to melt the protective dip
• Always use with a suitable melting pot
Die Realasing Fluids | GRAPHACE
Die casting is a casting method in which molten metals under high pressure are poured into molds and hardened. Our GRAPHACE series of die casting mold releasing lubricants is crucial for releasing heated metals from their molds. GRAPHACE brand die lubricants are used in die cast machines to cast aluminum, magnesium, and zinc parts, which results in better quality parts, improvements to plant productivity and a better working environment.
MS-1 White : liquid Excellent seizure resistance. Available for wide range of machine size at high dilution. Also available as anti-seize agent at low dilution.
GL-6300 Milky white : liquid It is a newly designed release agent considering the adhesion efficiency of release agent components.
Plunger Lubricants | NEOCASTER
During the die casting process, plunger lubricant is necessary to lubricate the sleeves and tips that force the molten metal into the molds. Our NEOCASTER brand plunger lubricant is used in the casting of aluminum parts for automobiles, motorcycles, mobile phones, and similar objects. Using the NEOCASTER plunger lubricant has proven to increase the life of the tip and the shot sleeve as well as improve the casting quality.
PWS-850 : Yellowish brown Good wettability to the metal surface. Stable lubricity at high temperature.
PW-50 : Milky white liquid Available for small and midium-sized machine.
B-200R : Black General purpose type.
RE-77 : Milky white liquid Suitable for small and medium-sized machine.
Die casting is a casting method in which molten metals under high pressure are poured into molds and hardened. Our GRAPHACE series of die casting mold releasing lubricants is crucial for releasing heated metals from their molds. GRAPHACE brand die lubricants are used in die cast machines to cast aluminum, magnesium, and zinc parts, which results in better quality parts, improvements to plant productivity and a better working environment.
MS-1 White : liquid Excellent seizure resistance. Available for wide range of machine size at high dilution. Also available as anti-seize agent at low dilution.
GL-6300 Milky white : liquid It is a newly designed release agent considering the adhesion efficiency of release agent components.
Plunger Lubricants | NEOCASTER
During the die casting process, plunger lubricant is necessary to lubricate the sleeves and tips that force the molten metal into the molds. Our NEOCASTER brand plunger lubricant is used in the casting of aluminum parts for automobiles, motorcycles, mobile phones, and similar objects. Using the NEOCASTER plunger lubricant has proven to increase the life of the tip and the shot sleeve as well as improve the casting quality.
PWS-850 : Yellowish brown Good wettability to the metal surface. Stable lubricity at high temperature.
PW-50 : Milky white liquid Available for small and midium-sized machine.
B-200R : Black General purpose type.
RE-77 : Milky white liquid Suitable for small and medium-sized machine.
Cutting fluids are used when metals or similar materials are cut and made into finished products by machine tools such as lathes, machining centers, and grinding machines. MORESCO is developing cutting fluids that have long service lives, which reduces the amount of waste fluid that is generated and thereby contributes to environmental improvements.
Toolmate Waterbase
BS-33 (Biostatic Types) : Machining of aluminum and steel.
GR-2 (Biostatic Types) : Precision grinding, Efficient grinding of steel, and special metals.
Toolmate Oilbase
NN Series : Inactive oil-based cutting oil. There is no discoloration such as copper · brass etc. We have variety types from low to high viscosity.
NA Series : Active type of oil-based cutting oil. It has great processability for iron based workpieces. We have variety types from low to high viscosity.
Toolmate Waterbase
BS-33 (Biostatic Types) : Machining of aluminum and steel.
GR-2 (Biostatic Types) : Precision grinding, Efficient grinding of steel, and special metals.
Toolmate Oilbase
NN Series : Inactive oil-based cutting oil. There is no discoloration such as copper · brass etc. We have variety types from low to high viscosity.
NA Series : Active type of oil-based cutting oil. It has great processability for iron based workpieces. We have variety types from low to high viscosity.