Pump & Lubricants
Moresco Die Casting Lubricants
Die Realasing Fluids | GRAPHACE
Die casting is a casting method in which molten metals under high pressure are poured into molds and hardened. Our GRAPHACE series of die casting mold releasing lubricants is crucial for releasing heated metals from their molds. GRAPHACE brand die lubricants are used in die cast machines to cast aluminum, magnesium, and zinc parts, which results in better quality parts, improvements to plant productivity and a better working environment.
MS-1 White : liquid Excellent seizure resistance. Available for wide range of machine size at high dilution. Also available as anti-seize agent at low dilution.
GL-6300 Milky white : liquid It is a newly designed release agent considering the adhesion efficiency of release agent components.
Plunger Lubricants | NEOCASTER
During the die casting process, plunger lubricant is necessary to lubricate the sleeves and tips that force the molten metal into the molds. Our NEOCASTER brand plunger lubricant is used in the casting of aluminum parts for automobiles, motorcycles, mobile phones, and similar objects. Using the NEOCASTER plunger lubricant has proven to increase the life of the tip and the shot sleeve as well as improve the casting quality.
PWS-850 : Yellowish brown Good wettability to the metal surface. Stable lubricity at high temperature.
PW-50 : Milky white liquid Available for small and midium-sized machine.
B-200R : Black General purpose type.
RE-77 : Milky white liquid Suitable for small and medium-sized machine.
Die casting is a casting method in which molten metals under high pressure are poured into molds and hardened. Our GRAPHACE series of die casting mold releasing lubricants is crucial for releasing heated metals from their molds. GRAPHACE brand die lubricants are used in die cast machines to cast aluminum, magnesium, and zinc parts, which results in better quality parts, improvements to plant productivity and a better working environment.
MS-1 White : liquid Excellent seizure resistance. Available for wide range of machine size at high dilution. Also available as anti-seize agent at low dilution.
GL-6300 Milky white : liquid It is a newly designed release agent considering the adhesion efficiency of release agent components.
Plunger Lubricants | NEOCASTER
During the die casting process, plunger lubricant is necessary to lubricate the sleeves and tips that force the molten metal into the molds. Our NEOCASTER brand plunger lubricant is used in the casting of aluminum parts for automobiles, motorcycles, mobile phones, and similar objects. Using the NEOCASTER plunger lubricant has proven to increase the life of the tip and the shot sleeve as well as improve the casting quality.
PWS-850 : Yellowish brown Good wettability to the metal surface. Stable lubricity at high temperature.
PW-50 : Milky white liquid Available for small and midium-sized machine.
B-200R : Black General purpose type.
RE-77 : Milky white liquid Suitable for small and medium-sized machine.
Download
Produk Lainnya
Hot dip protective plastic coating moulds around the component or tool to provide 100% coverage and protect against impact and corrosion.
Features and Benefits
• Hot dip plastic coating moulds itself around the part to provide 100% coverage and protect against corrosion and impacts for up to ten years
• Easy part identity through the translucent coating
• Simple to remove by peeling off
• Once removed, leaves behind a thin oil film to provide short term protection against corrosion
• Removed coatings may be reused saving cost
Notes
• Each single block measures (L)-150mm (H)-50mm (W)-80mm
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)
Warnings
• Never directly apply heat to melt the protective dip
• Always use with a suitable melting pot
Features and Benefits
• Hot dip plastic coating moulds itself around the part to provide 100% coverage and protect against corrosion and impacts for up to ten years
• Easy part identity through the translucent coating
• Simple to remove by peeling off
• Once removed, leaves behind a thin oil film to provide short term protection against corrosion
• Removed coatings may be reused saving cost
Notes
• Each single block measures (L)-150mm (H)-50mm (W)-80mm
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)
Warnings
• Never directly apply heat to melt the protective dip
• Always use with a suitable melting pot
HILUBE
MORESCO-HILUBE, our high temperature lubricating oil, is used in harsh environments as the base oil of greases used with bearings subject to the high temperatures of automotive electrical components and as the lubricating oil used with bearings of machinery such as OA machinery, with bread ovens, and with the drive section of drying furnaces.
L-150 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
L-320 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
L-560 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
L-830 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
MORESCO-HILUBE, our high temperature lubricating oil, is used in harsh environments as the base oil of greases used with bearings subject to the high temperatures of automotive electrical components and as the lubricating oil used with bearings of machinery such as OA machinery, with bread ovens, and with the drive section of drying furnaces.
L-150 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
L-320 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
L-560 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
L-830 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
• No close tolerances
• Pulsation-free flow
• Laminar flow
• Non-impinging, preventing degradation
• Does not emulsify or damage delicate and shear sensitive products
• Includes in-line, close-coupled, side-by-side, over-under, and self-priming configurations
• Pulsation-free flow
• Laminar flow
• Non-impinging, preventing degradation
• Does not emulsify or damage delicate and shear sensitive products
• Includes in-line, close-coupled, side-by-side, over-under, and self-priming configurations
Our submersible pumps often go to work where centrifugal, progressive cavity, lobe, and chopper pumps have failed. Their unique design and our state-of-the-art technology tackle even the toughest applications with ease.