a a a a a a a a a a a a
Distributor Fluke
Distributor Fluke
Customer Services
(021) 2908-5810
/
628111042805
Pneumatic Tools

Kennedy KC10-1MT KEN-FIT CONN. 10 mm - G1/8 M/T

Connector to Male Taper


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Download
Produk Lainnya
KEC45MP KENFIT ECONN 4 mm  M5 MP
Kennedy KEC4-5MP KEN-FIT E/CONN 4 mm - M5 M/P
Elbow Connector to Male Parallel


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
CP7749 Series  Impact Wrenches
Chicago Pneumatic CP7749 Series - Impact Wrenches
The CP7749 1/2" impact wrench features a reverse torque of up to 955ft.lbs / 1,300 Nm, enabling quick & efficient loosening and tightening. The tool benefits from S2S technology, which limits stress on the wrist and arm when changing between forward and reverse. The twin hammer impact mechanism and composite housing offer high durability while being both lightweight and compact. The CP7749 series is composed of 2 models: 1/2" short anvil and 1/2" long anvil (2" anvil).
GES2506L 60mm Extended Spindle Die Grinder 25000 rpm
Kobe Red Line GES2506L 6.0mm Extended Spindle Die Grinder, 25,000 rpm
Professional extended air die grinder suitable for use on a wide range of applications with an extended spindle for extra reach in "hard to get at" areas

Features and Benefits
• Extended spindle allowing two-handed operation
• Safety release throttle prevents accidental start-ups
• Front exhaust blows away dust and debris
• Fitted with long collet nut
• Supplied with two collet spanners and a comprehensive instruction manual

Typical Applications
• For use on grinding, polishing, buffing and deburring
• Ideal for cleaning, Smoothing welds seams and castings
• Maintenance applications

Notes
• Always ensure that the speed of the air tool never exceeds the maximum operating speed of the consumable
• Recommended Consumables - Tungsten Carbide Burrs, Mounted Points, Flap Wheels and Abrasive Bands

KC62FP KENFIT CONN 6mm G14 FP
Kennedy KC6-2FP KEN-FIT CONN. 6mm- G1/4 F/P
Connector to Female Parallel


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.