IW500 - 1/2" Impact Wrench
One piece aluminium housing, 10 position power regulator, thumb switch for reversing, 1/4" NPT air inlet thread for 10mm air hose, 90psi air pressure, 300ft/lbs torque, 3.5cfm* air consumption.

Features and Benefits
• Highly efficient
• Durable aluminum design
• M16 bolt capacity

Notes
• Sound pressure level: 88dBA
• Vibration level: 4.2m/s²
• Overall length: 188mm

*Based on a 15 second cycle per minute average use

Designed for heavy tire changing applications with its torque limited in forward of 370 ft.lbs / 500 Nm and its maximum torque in reverse of 1,920 ft.lbs / 2,600Nm, the 1" impact wrench CP7782TL series limits the risk of over tightening during the tightening phase, while at the same time being very powerful once nuts or bolts have to be removed. In addition, the pinless closed reinforced rocking dog impact mechanism and metal housing offer high durability.

Connector to Male Taper


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

Optimise opportunities with this angle impact wrench, designed for tight loosening and tightening applications thanks to its angled head and its single-handed forward – reverse ring. Its jumbo hammer impact mechanism, its metal housing, and its steel motor all offer high durability. High productivity is ensured with a torque of 220 ft.lbs / 300 Nm. The CP7727/CP7737 series is composed of 2 models: 3/8" short anvil and 1/2" short anvil.