Pneumatic Tools
Chicago Pneumatic CP7748TL Series - Impact Wrenches
Designed for tire changing applications with a torque limited in forward to 60-70 ft. Lbs / 90-140 Nm and a maximum torque in reverse of 920 ft.lbs / 1,250 Nm, the CP7748TL series limits the risk of over tightening during the tightening phase while also being very powerful when nuts or bolts have to be removed. In addition, the new forward/reverse system & power control (ring system) increase operator comfort while also improving functionality. The CP7748TL Series is composed of 2 models: 1/2" short anvil and 1/2" long anvil (2" anvil)
Download
Produk Lainnya
Elbow Connector to Male Taper
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Optimise opportunities with this angle impact wrench, designed for tight loosening and tightening applications thanks to its angled head and its single-handed forward – reverse ring. Its jumbo hammer impact mechanism, its metal housing, and its steel motor all offer high durability. High productivity is ensured with a torque of 220 ft.lbs / 300 Nm. The CP7727/CP7737 series is composed of 2 models: 3/8" short anvil and 1/2" short anvil.
This 3/8" and 1/2" impact wrench series, designed with a pin clutch mechanism in oil bath and a metal motor housing for high durability is highly recommended. High productivity in loosening and tightening nuts, while also being both compact and comfortable. The CP724/CP726 Series consists of 2 sizes : 3/8" short anvil and 1/2" short anvil.
This 1/4" & 3/8" butterfly impact wrenches series, designed for tight applications is highly recommended. The double rocking dog impact mechanism and metal motor housing offer high durability. High productivity is ensured with a torque of 80 ft.lbs / 110 Nm. The CP7711/CP7721 series consists of 2 models: 1/4" short anvil and 3/8" short anvil.