B7444 - Suitable for production and assembly applications. Twin hammer mechanism. 1/2" square drive. Three position dial style speed regulator. Forward/reverse selection. Ergonomic and comfortable handle grip. Fixed inlet and exhaust.
Forward: position 1: 4000rpm, position 2: 5000rpm, position 3: 7000rpm.
Reverse: position 1: 3000rpm, position 2: 5000rpm, position 3: 7000rpm.
Square : 1/2"
Maximum torque: 813Nm
Recommended air pressure: 6.2bar/90psi.
Air consumption:(113ltr/min).
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 10mm (3/8").

*Based on a 15 second cycle per minute average use.

The CP772 Series is the "Classic" 3/4" impact wrench, designed with a pin clutch mechanism in oil bath and a metal motor housing for high durability.

Optimal fastening and unbolting processes with this ultra lightweight 1" impact wrench. Featuring a pinless closed reinforced rocking dog impact mechanism and metal housing, this tool is designed to optimise tire changing. It delivers a maximum reverse torque up to 1,770 ft.lbs / 2,400 N. The CP7783 series consists of 2 models: 1" short anvil and 1" long anvil (6" anvil).

By choosing the ULTRA lightweight (2.2 lbs. / 1.0 Kg) and compact (4.3 in. / 108 mm length) CP7731C / CP7732C series, your daily tight applications in general maintenance can be met with ease thanks to its torque of 460 ft.lbs. / 625 Nm in reverse. The CP7731C/CP7732C series is available in 2 models: 3/8" short anvil and 1/2" short anvil.