a a a a a a a a a a a a
Distributor Fluke
Distributor Fluke
Customer Services
(021) 2908-5810
/
628111042805
Product

Measuring Tools

**If you don't find the product you are looking for, please chat admin via WhatsApp to check the availability of the item
4 20 BLADE METRIC FEELER GAUGE
Kennedy 4" 20 BLADE METRIC FEELER GAUGE
With Hardened and polished taper blades, enclosed in a steel case metric feeler blades from Kennedy are clearly marked for easy identification.



Features and Benefits

• Hardened and polished taper blades, enclosed in a steel case

• Blades are clearly marked for easy identification



Standards

• Manufactured to DIN 2275



Typical Applications

• Mechanical

• Engineering



Notes

• Range: 10 Blade: .05 - .80mm. 13 and 20 Blade: .05 - 1mm



4 SPRING TYPE DIVIDERSSOLID NUT
Kennedy 4" SPRING TYPE DIVIDERS-SOLID NUT
Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the distance between the two points. A circular spring bow joins the legs, with a knurled extension attached for use when pivoting the dividers. Dividers are used for scribing arcs and circles, a light centre punch mark on the work keeps the pivot leg in the centre while marking.



Features and Benefits

• High quality polished steel with ground finished points

• Adjusting screw mounted across the legs for setting distance between points

• A light centre punch mark on the work keeps pivot leg in the centre while marking

• Ideal for use in scribing arcs and circle applications
5130mm VERNIER CALIPER
Kennedy 5"/130mm VERNIER CALIPER
Metric & Inch Reading - Graduation: 0.02mm/0.001"

Incorporating Quadri feature - gives outside, inside, depth and step readings.

Fine adjustment feature allows improved sensitivity of slider movement.

14° vernier face angle reduces parallax.



Satin chrome finish with clear easy read graduations.
5X HAND MAGNIFIER 50mm DIAMETER
Kennedy 5X HAND MAGNIFIER 50mm DIAMETER
This range of plastic, lightweight hand magnifiers are easy to use and provide a clear image. They are ideal for inspecting finished parts, enlarging small text, pictures and diagrams.



Features and Benefits

• Lightweight plastic

• Range of sizes

• Provides a clear image



Typical Applications

• Inspecting parts

• Enlarging text and images

• Enlarging diagrams



6150mm COOLANTPROOF IP 67 DIGITAL CALIPER
Kennedy 6"/150mm COOLANT-PROOF IP 67 DIGITAL CALIPER
Available in a range of sizes, this digital caliper is coolant, water and dust proof to IP67 level. It has a large LCD display, fast response speed, dual readout (mm/inch) and can be used for inside, outside, depth and step measuring. Also enables absolute and relative reading.



Extra batteries available - Order Code PAN9042505E 3V Lithium Metal cell
6150mm DIGITAL ABS ELECTRONIC CALIPER
Kennedy 6"/150mm DIGITAL ABS ELECTRONIC CALIPER
Modern design with a knurled thumb wheel for easy use when taking internal and external depth and step measurements.

Dual readout giving instant inch/metric conversion at the touch of a button.

Zero reset at any point, large clear display, error-free operation, fast response speed. Non-output type.



Resolution: 0.01mm/0.0005".



Extra batteries available - Order Code EDI -904-4000K.
7180mm VERNIER CALIPER
Kennedy 7"/180mm VERNIER CALIPER
Metric & Inch Reading - Graduation: 0.02mm/0.001"

Incorporating Quadri feature - gives outside, inside, depth and step readings.

Fine adjustment feature allows improved sensitivity of slider movement.

14° vernier face angle reduces parallax.



Satin chrome finish with clear easy read graduations.
789 ProcessMeter
Fluke 789 ProcessMeter™
Double your strength



The Fluke 787 was the first device to combine a DMM and a loop calibrator to give process technicians double the power in one tool. Now even better, range is extended in the Fluke 789 – the ultimate loop calibration multimeter. The Fluke 789 has a 24-Volt supply loop which eliminates the need to take a separate power supply when testing transmitters offline. And with selectable onboard 250-Ohm Hart® resistors, the need to carry separate resistors is eliminated. Now process engineers can do more while carrying far less.
8 SPRING TYPE DIVIDERSSOLID NUT
Kennedy 8" SPRING TYPE DIVIDERS-SOLID NUT
Manufactured from high quality polished steel. Ground finished points, a fine adjusting screw is mounted across the legs for setting the distance between the two points. A circular spring bow joins the legs, with a knurled extension attached for use when pivoting the dividers. Dividers are used for scribing arcs and circles, a light centre punch mark on the work keeps the pivot leg in the centre while marking.



Features and Benefits

• High quality polished steel with ground finished points

• Adjusting screw mounted across the legs for setting distance between points

• A light centre punch mark on the work keeps pivot leg in the centre while marking

• Ideal for use in scribing arcs and circle applications
8200mm COOLANTPROOF IP 67 DIGITAL CALIPER
Kennedy 8"/200mm COOLANT-PROOF IP 67 DIGITAL CALIPER
Available in a range of sizes, this digital caliper is coolant, water and dust proof to IP67 level. It has a large LCD display, fast response speed, dual readout (mm/inch) and can be used for inside, outside, depth and step measuring. Also enables absolute and relative reading.



Extra batteries available - Order Code PAN9042505E 3V Lithium Metal cell
8200mm DIGITAL ABS ELECTRONIC CALIPER
Kennedy 8"/200mm DIGITAL ABS ELECTRONIC CALIPER
Modern design with a knurled thumb wheel for easy use when taking internal and external depth and step measurements.

Dual readout giving instant inch/metric conversion at the touch of a button.

Zero reset at any point, large clear display, error-free operation, fast response speed. Non-output type.



Resolution: 0.01mm/0.0005".



Extra batteries available - Order Code EDI -904-4000K.
ADJ TELESCOPIC 2 DIA INSPECTION MIRROR
Kennedy ADJ TELESCOPIC 2" DIA INSPECTION MIRROR
The Kennedy range of circular inspection mirrors feature a ball and socket universally positional joint, holding the high grade distortion free mirror at any angle. They come mounted on chrome plated high polish finish telescopic shafts.



Features and Benefits

• Ball and socket universally positional joint for easy positioning

• High grade distortion-free mirror

• Durable chrome plated high polish finish telescopic shafts



Specifications

1.1/4"

• Diameter: 30mm

• Includes high power magnet and pocket clip

• Length Closed/Open (180/480mm)

2"

• Diameter: 50mm

• Length Closed/Open (280/420mm)



Typical Applications

• Inspection

• Automotive

• Engineering