M12 UHL-0 • 1,350 lumens of TRUEVIEW™ High Definition output • MILWAUKEE"s FINISHGUARD™ hooks provide lasting protection against scratches to a vehicle"s finish • 2X more gripping surface for maximum hold
• 1,350 lumens of TRUEVIEW™ High Definition output • MILWAUKEE"s FINISHGUARD™ hooks provide lasting protection against scratches to a vehicle"s finish • 2X more gripping surface for maximum hold • Rotate, slide, remove and hang light bar for added flexibility and versatility • Two Brightness Options: High - 1,350 Lumens/4 hrs. Low - 600 Lumens/8 hrs. • Mounting hooks extend 47"-78" covering wide cars and trucks • Light bar with stainless steel hook • Sturdy aircraft aluminum frame • Impact and chemical resistant lens
This Acti9 iK60N product is a low voltage miniature circuit breaker (MCB). It is a 2P circuit breaker with 2 protected poles and 40A In rated current and C tripping curve. The rated short circuit breaking capacity goes up to 6000A at 230VAC conforming to EN/IEC 60898-1 standard and at conforming to standard. This product is compliant with EN/IEC 60898-1 standard. This miniature circuit breaker protects circuit against short circuit and overload current. It has a double clip for dismounting with comb busbar in place. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 230VAC. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 4kV. The operating frequency is 50Hz or 60Hz. It can be mounted on DIN rail for modular installation. Its width is 4 pitches of 9mm. The product colour is white (RAL9003). The dimensions are (W) 36mm x (H) 85mm x (D) 78.5mm. The weight is 200g. It has an IP20 degree of protection. It becomes IP40 once in modular enclosure according to IEC/EN 60529 standard. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C.
EAT 010 - 10W CREE LED anodised aluminium torch with adjustable beam 600Lm
Features and Benefits • Ultra Bright 10W CREE T6 LED • Strong Lightweight Anodised Aluminium body for durability • Adjustable beam focus for versatility in use • Impact resistance (drop test) 1m • Operating temperature of -20 - 50°C
Notes • Requires 3 x Size C batteries (not included)
Air Circuit Breaker (ACB) is one type of electrical protection device commonly used in electrical systems. Air Circuit Breaker is an electrical protection device used to cut off the flow of electricity in an electrical circuit when there is a disturbance or excess current. This tool is generally used in industrial electrical panels and can be used in electrical systems with quite high voltage.
Air Circuit Breaker works by cutting off the flow of electricity in an electrical circuit when there is a disturbance or excess current. Air Circuit Breaker uses a special system consisting of several components, such as trip unit, operating mechanism, and current transformer. When there is a disturbance in an electrical circuit, the trip unit will detect excess current. Then, it gives a signal to the operating mechanism to cut off the flow of electricity in the circuit. After the electric current is cut off, Air Circuit Breaker will extinguish the arc that occurs using the arc extinguishing system that has been prepared.
The main function of Air Circuit Breaker is to protect electrical equipment and systems from damage due to over current or excess current, which usually occurs due to short circuit or overload.
Type of Luminaire : Standard Floodlight (Pro) A Series Set Model No : NYS12747LD2031 Type of Light Source : LED Power Input : 661W System Lumen Output : 103400 lm Power Voltage : 200-242V Lifetime : 40000H(L70) CCT : 5000K CRI : 70 Input Frequency : 50/60Hz Dimming : non-Dimmable Glare Cut Angle : 54deg. Beam Angle : 34deg. IP Rating : 65 Ambient Temperature : -20 - 35°C Dimensions : 487mmx537mmx720mm Body : ADC