Electrical & Lighting
Edison Head Torch, CREE LED, Rechargeable, 120lm, 115m Beam Distance, IPX4
This LED head torch can deliver an output of 120 lumens which can illuminate up to 115 meters away. The sturdy headlamp body tilts up to 90 degrees, allowing you to focus the light where it's required. Fully rechargeable.
Features and Benefits
• 3 working modes: Full power, half power and flashing to suit your needs
• Rechargeable Li-on Battery included
• 1.5 metre USB charging cable included to recharge as needed
• Impact resistance (drop test) 1m making for a robust product
• Operating temperature of -20 - 50°C for versatility in use
• IPX-4 waterproof and designed for use outdoors in heavy rain
Features and Benefits
• 3 working modes: Full power, half power and flashing to suit your needs
• Rechargeable Li-on Battery included
• 1.5 metre USB charging cable included to recharge as needed
• Impact resistance (drop test) 1m making for a robust product
• Operating temperature of -20 - 50°C for versatility in use
• IPX-4 waterproof and designed for use outdoors in heavy rain
Download
Produk Lainnya
Type of Luminaire : Street Light EVO
Set Model No : NNP11740GL
Type of Light Source : LED
Power Input : 40W
System Lumen Output : 5200 lm
Power Voltage : 100-240V
Power Factor : 0.90
Lifetime : 50000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : 5 steps automatic dimming
IP Rating : 66
Ambient Temperature : 5°C~40°C
Dimensions : 732×212×109mm
Body : ADC
Set Model No : NNP11740GL
Type of Light Source : LED
Power Input : 40W
System Lumen Output : 5200 lm
Power Voltage : 100-240V
Power Factor : 0.90
Lifetime : 50000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : 5 steps automatic dimming
IP Rating : 66
Ambient Temperature : 5°C~40°C
Dimensions : 732×212×109mm
Body : ADC
Air Circuit Breaker (ACB) is one type of electrical protection device commonly used in electrical systems. Air Circuit Breaker is an electrical protection device used to cut off the flow of electricity in an electrical circuit when there is a disturbance or excess current. This tool is generally used in industrial electrical panels and can be used in electrical systems with quite high voltage.
Air Circuit Breaker works by cutting off the flow of electricity in an electrical circuit when there is a disturbance or excess current. Air Circuit Breaker uses a special system consisting of several components, such as trip unit, operating mechanism, and current transformer. When there is a disturbance in an electrical circuit, the trip unit will detect excess current. Then, it gives a signal to the operating mechanism to cut off the flow of electricity in the circuit. After the electric current is cut off, Air Circuit Breaker will extinguish the arc that occurs using the arc extinguishing system that has been prepared.
The main function of Air Circuit Breaker is to protect electrical equipment and systems from damage due to over current or excess current, which usually occurs due to short circuit or overload.
Air Circuit Breaker works by cutting off the flow of electricity in an electrical circuit when there is a disturbance or excess current. Air Circuit Breaker uses a special system consisting of several components, such as trip unit, operating mechanism, and current transformer. When there is a disturbance in an electrical circuit, the trip unit will detect excess current. Then, it gives a signal to the operating mechanism to cut off the flow of electricity in the circuit. After the electric current is cut off, Air Circuit Breaker will extinguish the arc that occurs using the arc extinguishing system that has been prepared.
The main function of Air Circuit Breaker is to protect electrical equipment and systems from damage due to over current or excess current, which usually occurs due to short circuit or overload.
Features:
• Super bright white 18 x 0.5 SMD LED.
• 3.7V 2200mAh Li-on Battery.
• 360° swivel hanging Hook.
• Integrated magnet on rear.
• USB and micro USB ports.
• 110-240V AC/DC charger with 1.5m micro cable.
• Two lighting modes: High (100%) on and Low (30%) on.
• Operating time: 2 hours.
• charging time: 5 hours.
• Impact resistance (drop test) 1m.
• Operating temperature: -20 - 50°C.
• IPX-4 waterproof and designed for outside use in heavy rain.
• Super bright white 18 x 0.5 SMD LED.
• 3.7V 2200mAh Li-on Battery.
• 360° swivel hanging Hook.
• Integrated magnet on rear.
• USB and micro USB ports.
• 110-240V AC/DC charger with 1.5m micro cable.
• Two lighting modes: High (100%) on and Low (30%) on.
• Operating time: 2 hours.
• charging time: 5 hours.
• Impact resistance (drop test) 1m.
• Operating temperature: -20 - 50°C.
• IPX-4 waterproof and designed for outside use in heavy rain.
Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NYS12527LD2031
Type of Light Source : LED
Power Input : 462W
System Lumen Output : 68900 lm
Power Voltage : 200-242V
Lifetime : 40000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 70deg.
Beam Angle : 53deg.
IP Rating : 65
Ambient Temperature : -20 - 35°C
Dimensions : 487mmx534mmx500mm
Body : ADC
Set Model No : NYS12527LD2031
Type of Light Source : LED
Power Input : 462W
System Lumen Output : 68900 lm
Power Voltage : 200-242V
Lifetime : 40000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 70deg.
Beam Angle : 53deg.
IP Rating : 65
Ambient Temperature : -20 - 35°C
Dimensions : 487mmx534mmx500mm
Body : ADC