The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining.
Features and Benefits • High speed steel construction for increased tool durability • Point angle of 118° for precise holemaking and precision cutting • Black oxide coating helps aid chip flow, reduce heat and prevent staining • Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite
HSS multi diameter step drills produce good quality holes in a wide variety of sheet metal, using either a bench drill or light pedestal drilling machine. Manufactured from high speed steel, they offer sound rigidity, strength and stability when machining. Each tool cuts parallel holes in a range of specific sizes and is compatible with materials up to 1/8" (3mm) thick.
Features and Benefits • High speed steel construction for greater strength, rigidity and stability • Excellent wear and heat resistance for prolonged tool life • Cuts parallel holes in sheet metal
The Kennedy® variable pitch hole saws deliver high quality holes in a range of materials, including wood, steel, brass, bronze, and cast iron. The M3 HSS cutting teeth aggressively cut to give a very smooth finish with little to no tear out.
Features and Benefits • Cuts up to 40% faster than constant pitch saws • Varying tooth pitch disrupts harmonics to substantially reduce noise • Tooth life is extended when used in conjuction with a cordless drill
Typical Applications • Construction • Engineering • Maintenance
Notes • 4-6 teeth per inch • 28.5mm (11/8") cutting depth
These carbide burrs are designed for cylindrical end cutting of low feed, high speed materials. Available in a variety of sizes with varying cut capabilities.
Features and Benefits • Manufactured from durable carbide for tool longevity • Rapid cut (Cut 3) burrs are suited for use on softer non-ferrous and plastic materials • Chipbreaker (Cut 9) burrs are suited for use on cast iron, carbon steel, alloy steel 50RC and 60RC • Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel up to HRC65 hardness • Ideal for light stock removal at high rpms
Typical Applications • Deburring
Notes • Not suitable for milling large amounts of material • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used • Always ensure that the tool is rated to the recommended operating speed of the burr
These carbide burrs are designed for cylindrical end cutting of low feed, high speed materials. Available in a variety of sizes with varying cut capabilities.
Features and Benefits • Manufactured from durable carbide for tool longevity • Rapid cut (Cut 3) burrs are suited for use on softer non-ferrous and plastic materials • Chipbreaker (Cut 9) burrs are suited for use on cast iron, carbon steel, alloy steel 50RC and 60RC • Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel up to HRC65 hardness • Ideal for light stock removal at high rpms
Typical Applications • Deburring
Notes • Not suitable for milling large amounts of material • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used • Always ensure that the tool is rated to the recommended operating speed of the burr
Conical Shape. All sizes are nominal with a 6mm shank unless other wise stated.
Cut Numbers:
Cut 6 - Double Cut. Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Cut 9 - Chipbreaker Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc. up to HRC65 hardness.
Please note: • Work piece and tools should always be steady and well supported. • Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'. • Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used. • Always ensure that the tool is rated to the recommended operating speed of the burr.
The Kennedy® Carbide Burr Set features eight heads with varying nose shapes suitable for use on hard materials such as steel alloys, carbon and cast iron.
Features and Benefits • Durable carbide construction • 8-piece set with varying nose shapes to suit the preferred application • Features a handy carry case for easy storage and tool identification • Shank diameter: 6mm • Max. speed (rpm): 40,000 • Chipbreaker (Cut 9): for use on cast iron, carbon steel, alloy steel 50RC and 60RC
Contents • 1x C shape ball nosed cylinder 9.6 x 19mm • 1x E shape oval 9.6 x 16mm • 1x F shape ball nosed tree 9.6 x 19mm • 1x G-shape pointed tree 9.6 x 19mm • 1x A shape cylinder without end cut 9.6 x 19mm • 1x C shape ball nosed cylinder 12.7 x 25mm • 1x D shape ball 12.7 x 11mm • 1x F shape ball nosed tree 12.7 x 25mm
Typical Applications • Milling • Deburring
Warnings • Not suitable for milling large amounts of material
• T-shank • For cutting wood and wood-based products (plywood, chipboard etc.) , plastic and metal (thin or perforated sheet) • Compatible with the majority of modern jigsaws • Pack of 5
Insert Grade QX5020 (ISO P10-P35 M10-M30 K10-K30) CVD Coated.An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
TCGT turning inserts feature a CVD coated substrate providing an excellent general purpose grade for medium roughing on steels, stainless and cast irons.
Features and Benefits • CVD MT-TiCN-Al2O3-TiN coating for increased heat and wear resistance • Tough substrate for increased cutting strength • Versatile usage can be used in a range of applications from roughing to finishing • PF chipbreaker for good chip flow
Typical Applications • General purpose • Medium roughing • Finishing • Steel • Stainless steel • Cast iron Finish.
Standards • Insert Grade QX5020 • (ISO P10-P35 M10-M30 K10-K30)