a a a a a a a a a a a a
Distributor Fluke
Distributor Fluke
Customer Services
(021) 2908-5810
/
628111042805
Abrasive

Makita Cutting Wheel, 355 x 3 x 25.4mm, A36, Aluminium Oxide

355mm x 3mm x 25.4mm.
Metal cutting abrasive 355mm diameter Cut off Saw wheel can be used to cut metal, extrusions, welds, tubing, trunking, pipes, etc.

Specification:
Diameter: 355mm.
Bore: 25.4mm.
Thickness: 3mm.
Centre: Flat.
Quantity: 5.
Download
Produk Lainnya
Cutting Wheel 355 x 3 x 254mm A36 Aluminium Oxide
Makita Cutting Wheel, 355 x 3 x 25.4mm, A36, Aluminium Oxide
355mm x 3mm x 25.4mm.
Metal cutting abrasive 355mm diameter Cut off Saw wheel can be used to cut metal, extrusions, welds, tubing, trunking, pipes, etc.

Specification:
Diameter: 355mm.
Bore: 25.4mm.
Thickness: 3mm.
Centre: Flat.
Quantity: 5.
Cut Off Wheel 180 x 18 x 3175mm A60 Aluminium Oxide 69936625798
Flexovit Cut Off Wheel, 180 x, 1.8 x, 31.75mm, A60, Aluminium Oxide, 69936625798
Non-Reinforced Toolroom Cutting Wheels
Thin slitting discs in aluminium oxide grain for all toolroom cutting-off applications.
Cutting Disc 30MediumCoarse 100 x 3 x 16 mm Type 41 Aluminium Oxide
York Cutting Disc, 30-Medium/Coarse, 100 x 3 x 16 mm, Type 41, Aluminium Oxide
Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders.

Features and Benefits
• Highly effective aluminum oxide abrasive - cuts faster for longer
• Multiple disc sizes available, to suit any need
• Ultra-strong Reinforced Resinoid bond provides strength and operator peace of mind

Typical Applications
• Designed for use on alloyed and unalloyed construction steel, steel profiles, tank construction and fabrication, welding and fabrication
• 300mm discs can be used on Suitable Disc Cutting saws
• For use with all appropriate handheld angle grinders
• Cutting discs must never be used for grinding and must always be presented to the work piece at an angle of 90°
• Not to be used for wet cutting

Standards Met
• EN12413
Flap Disc 100 x 16mm Conical Type 29 P36 Aluminium Oxide
York Flap Disc, 100 x 16mm, Conical (Type 29), P36, Aluminium Oxide
Conical flap discs are a high performance alternative to sanding discs where surface finish is important. On light gauge sheet metal, the overlapped abrasive strips slowly wear away revealing fresh abrasive.

Features and Benefits
• The overlap design reduces clogging and ensures the disc always cuts effectively and
• Provides a consistent finish throughout disc life
• No backing pads needed

Notes
• Safe to use at 80m/s on any grinder

Standards
EN12413