a a a a a a a a a a a a
Distributor Fluke
Distributor Fluke
Customer Services
(021) 2908-5810
/
628111042805
Product

Abrasive

**Jika tidak menemukan produk yang anda cari, silahkan chat admin melalui whatsapp untuk cek ketersediaan barangnya
Cutting Disc 60Fine 100 x 1 x 16 mm Type 41 Aluminium Oxide
York Cutting Disc, 60-Fine, 100 x 1 x 16 mm, Type 41, Aluminium Oxide
York Inox cutting discs are perfect for efficiently cutting metal with minimum material removal and machine wear, thanks to their thin profile. They are suitable for use with all appropriate handheld grinders and can even be used on stainless steel.
There are a wide range of sizes available, with 180mm and 230mm sizes suitable for use on circular saws.

Features and Benefits
• Thin profile allows for quick and efficient cuts with minimal material removal and machine wear
• Wide range of sizes allow for usage on a variety of appropriate handheld grinders and larger sizes can even be used in circular saws

Notes
• Cutting discs must never be used for grinding and must always be presented to the work piece at an angle of 90°
Coated Disc 150mm Aluminium Oxide P60 Hook  Loop
York Coated Disc, 150mm, Aluminium Oxide, P60, Hook & Loop
100% of these hook-n-loop sanding discs can be used.

Features and Benefits
• Can be removed and re-applied and unaffected by dust or moisture
• Aluminium oxide abrasive 'resin-bonded over resin' to hook-n-loop backed paper is suitable for wood, plastics, ceramics

Typical Applications
• Wood industry
• Plastics industry
100x16mm FGLASS ZIRC FLAP DISC P120
York 100x16mm F/GLASS ZIRC FLAP DISC P120
York conical flap discs are a high performance alternative to sanding discs with the advantage over depressed centre grinding discs on light gauge sheet metal where surface finish is important. The overlapped abrasive material wear away revealing fresh abrasive, ensuring the discs always cuts effectively and reduces clogging and providing a consistent finish throughout the disc life. The fibre backing allows for use without backing pads and makes the discs safe to use on any grinder up 80m/s speeds.

Features and Benefits
• Overlapped abrasive material wear away to reveal fresh abrasive ensuring effective cuts and reduces clogging
• Fibre backing allows for use without backing pads and makes the discs safe for use on any grinder

Typical Applications
• Construction
• Automotive
• Manufacturing

Standards
• EN12413
Flap Wheel 30 x 15mm P80 Aluminium Oxide 6mm Shank
York Flap Wheel, 30 x 15mm, P80, Aluminium Oxide, 6mm Shank
Shaft mounted flap wheels can be used in portable air or electric power tools, including die grinders, flexible shafts and drills.

Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting.

Features and Benefits
• Recessed hub design for maximum access in tight corners
• Highly efficient design
• Durable construction means the flap wheels last longer than others on the market

Typical Applications
• Final finishing of metal surfaces
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels
• Edge blending and cleaning. Surface preparation prior to painting and plating
• Can be used on metals, woods, plastic and fibreglass

Notes
• Images are for illustration purposes only
Flap Wheel 40 x 20mm P40 Aluminium Oxide 6mm Shank
York Flap Wheel, 40 x 20mm, P40, Aluminium Oxide, 6mm Shank
Shaft mounted flap wheels can be used in portable air or electric power tools, including die grinders, flexible shafts and drills.

Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting.

Features and Benefits
• Recessed hub design for maximum access in tight corners
• Highly efficient design
• Durable construction means the flap wheels last longer than others on the market

Typical Applications
• Final finishing of metal surfaces
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels
• Edge blending and cleaning. Surface preparation prior to painting and plating
• Can be used on metals, woods, plastic and fibreglass

Notes
• Images are for illustration purposes only
Flap Wheel 50 x 15mm P80 Aluminium Oxide 6mm Shank
York Flap Wheel, 50 x 15mm, P80, Aluminium Oxide, 6mm Shank
Shaft mounted flap wheels can be used in portable air or electric power tools, including die grinders, flexible shafts and drills.

Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting.

Features and Benefits
• Recessed hub design for maximum access in tight corners
• Highly efficient design
• Durable construction means the flap wheels last longer than others on the market

Typical Applications
• Final finishing of metal surfaces
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels
• Edge blending and cleaning. Surface preparation prior to painting and plating
• Can be used on metals, woods, plastic and fibreglass

Notes
• Images are for illustration purposes only

A3 MOUNTED POINT
Kennedy A3 MOUNTED POINT
High-quality 'A' Shape Mounted Points - with a Shank Diameter of 6mm.

Features and Benefits
• All points are aluminium oxide with 'rubenite™' as standard, providing vastly improved durability & reliability
• Available in a wide range of shapes and sizes to suit every need

Typical Applications
• Suitable for portable die and straight hand grinders
• For all general purpose grinding and deburring on steels and most metals

Notes
• Shank diameters are metric as listed below with inch sizes available on request
• Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only
Stripping Disc 115mm XCoarse Aluminium Oxide
York Stripping Disc, 115mm, X-Coarse, Aluminium Oxide
1x 115mm Disc.
Made of intertwined nylon fibres which are then immersed in synthetic resin and gently
hardened.
DIN EN 13743

Features and Benefits
• Offers class-leading performance at a competitive price

Typical Applications
• Ideal for removing old paint, rust and welding splatter without scratching the surface of the workpiece
• Suitable for cleaning and smoothing wood and plastic, polishing of stainless steel and removal of thermal bluing
24mm Brass Crimped Wire Flat End Decarbonising Brush  30SWG
York 24mm Brass, Crimped Wire Flat End De-carbonising Brush - 30SWG
Rotary wire brush for hard to reach areas such as drilled holes, recesses and corners. For removal of burrs, rust and paint.

• Very flexible in use
Flap Disc 100 x 16mm Conical Type 29 P40 Aluminium Oxide
York Flap Disc, 100 x 16mm, Conical (Type 29), P40, Aluminium Oxide
Conical flap discs are a high performance alternative to sanding discs where surface finish is important. On light gauge sheet metal, the overlapped abrasive strips slowly wear away revealing fresh abrasive.

Features and Benefits
• The overlap design reduces clogging and ensures the disc always cuts effectively and
• Provides a consistent finish throughout disc life
• No backing pads needed

Notes
• Safe to use at 80m/s on any grinder

Standards
EN12413
Flap Wheel 50 x 30mm P40 Aluminium Oxide 6mm Shank
York Flap Wheel, 50 x 30mm, P40, Aluminium Oxide, 6mm Shank
Shaft mounted flap wheels can be used in portable air or electric power tools, including die grinders, flexible shafts and drills.

Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting.

Features and Benefits
• Recessed hub design for maximum access in tight corners
• Highly efficient design
• Durable construction means the flap wheels last longer than others on the market

Typical Applications
• Final finishing of metal surfaces
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels
• Edge blending and cleaning. Surface preparation prior to painting and plating
• Can be used on metals, woods, plastic and fibreglass

Notes
• Images are for illustration purposes only
Flap Wheel 50 x 20mm P80 Aluminium Oxide 6mm Shank
York Flap Wheel, 50 x 20mm, P80, Aluminium Oxide, 6mm Shank
Shaft mounted flap wheels can be used in portable air or electric power tools, including die grinders, flexible shafts and drills.

Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting.

Features and Benefits
• Recessed hub design for maximum access in tight corners
• Highly efficient design
• Durable construction means the flap wheels last longer than others on the market

Typical Applications
• Final finishing of metal surfaces
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels
• Edge blending and cleaning. Surface preparation prior to painting and plating
• Can be used on metals, woods, plastic and fibreglass

Notes
• Images are for illustration purposes only