Produk

Suitable for precision grinding of carbide, gems, glass, ceramics, tough alloys, cermets, tool steels etc.

Features and Benefits
• Diamond grip mesh is 120/140 for cutting hard substrates
• Ideal for operating speeds of up to 15,000 - 30,000 rpm
• Range of cutting head sizes to suit application

Typical Applications
• Deburring
• Grinding
• Hard substrates

The Equal Tees ensure quick and simple tube insertion whilst also boasting a compact lightweight design with a well proven tube retaining system. The tapered threads have a re-usable thread seal and parallel threads have a rubber washer. The main body is manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar. Available in a variety of sizes to suit your needs.





Features and Benefits


• Suited for use with nylon and polyurethane tubing for versatility of use


• Available in a range of sizes to suit your needs


• Quick and easy tube insertion with a solid seal


• Lightweight design due to the acetal construction, stainless steel retaining ring and nitrile tube seal and acetal resin tube release collar





Typical Applications


• Engineering


• Plumbing


• Garages

With patented Ken-Grip® technology, this 19 piece socket set is the cost effective way to ensure you always have the correct component for any application. Also supplied with accessories, the set comes in an attractive and durable red metal case to protect, store and transport your tools. Each socket possesses a unique Ken-Grip® design that protects nuts and bolst whilst providing bolstered grip.

Features and Benefits
• Grips nuts and bolts which are up to 95% rounded off
• Will not damage new, worn or rusted nuts and bolts
• Fits a wide range Metric, UNC, UNF, BSW, BSF and E-Torx® sizes
• Unique 'Double-Knurl' for high grip
• Chrome vanadium construction ensures product longevity
• Fully chrome plated finish for easy clean

Typical Applications
• Automotive
• DIY
• Plumbing
• Engineering
• Construction

The Dräger Polytron® 5200 CAT is a cost-effective explosion-proof transmitter for the detection of flammable gases in the lower explosion limit (LEL). It uses a catalytic bead DrägerSensor® Ex that will detect most flammable gases and vapours. A 3-wire 4 to 20 mA analogue output with relays makes it compatible with most control systems.

Kennedy tapered gauges are ideally suited for the rapid accurate checking of the inside diameters of tubing, slot widths, hole sizes, setting calipers etc.

Manufactured from spring tempered steel with 0.1mm increments. Rustless properties allow for a longer tool lifespan. The satin chrome anti glare finish combined with permanent black figures provides easy to read measurements



Features and Benefits

• Manufactured from spring tempered steel for increased durability

• Rustless properties allow for a longer tool lifespan

• Satin chrome anti glare properties and black figures for easy to read measurements



Typical Applications

• Diameters

• Tubing

• Slots

• Holes

Shaft mounted abrasive flap wheels are ideally suited for stock removal, deburring, cleaning, blending and finishing on a wide range of materials.

Features and Benefits
• Recessed hub design for maximum access in tight corners
• Suitable for portable power tools, including die grinders, flexible shafts and drills
• Ideal for removal of rust, cleaning up welds and sanding wood prior to painting
• Versatile - Can be used on metal, wood, plastic and fiberglass

Notes
• Always ensure that the speed of the air tool never exceeds the maximum operating speed of the consumable.

The Dräger Polytron® 8700 IR is an advanced explosion proof transmitter for the detection of combustible gases in the lower explosion limit (LEL). It uses a high performance infrared Dräger PIR 7000 sensor, which will quickly detect most common hydrocarbon gases. Besides a 3 wire 4 to 20 mA analogue output with relays, it also offers HART®, Modbus and Fieldbus making it compatible with most control systems.

Shaft mounted abrasive flap wheels are ideally suited for stock removal, deburring, cleaning, blending and finishing on a wide range of materials.

Features and Benefits
• Recessed hub design allows for maximum access in tight corners
• Suitable for use with portable power tools allowing for use in any situation
• Can be used on metal, wood, plastic, and fibreglass making it the go to for stock removal

Notes
• 6.0mm Shank

Branch Tee to Male Taper


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

Deep impact sockets 1/2in. drive that are made from chrome molybdenum alloy steel with a black oxidised finish. Used for turning nuts onto bolts.

Features and Benefits
• Made from chrome molybdenum alloy steel for specific use with impact wrenches
• Black oxidised finish for efficient protection against corrosion
• Clearly marked for a quick and easy tool selection

A 19 piece metric heavy duty drill set made of 5% cobalt material with excellent heat resistance. Ideal for drilling steels with tensile strength up to 1,400 N/mm2, very hard bronze, stainless steels as well as heat and acid resistant steels. The high speed steel and cobalt construction allows for greater rigidity when cutting through harder materials.

Features and Benefits
• Manufactured from high speed steel with 5% cobalt for added strength
• Excellent heat and wear resistance for prolonged tool lifespan
• Supplied in a robust carry case for easy portability and storage

Contents
• Set contains 1x 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5 and 10.0 mm drills

Specifications
• Point angle: 135°
• Helix angle: normal
• Web thickness: strengthened
• Relief angle: normal
• Tolerance of diameter: h8
• Tolerance of shank: f11
• Supply unit
• All diameters - 1 pc
• Manufacturing Standard: BS 328, DIN 338B

Typical Applications
• Drilling
• Steel
• Hard bronze
• Stainless steels

Metric & Inch Reading - Graduation: 0.02mm/0.001"

Incorporating Quadri feature - gives outside, inside, depth and step readings.

Fine adjustment feature allows improved sensitivity of slider movement.

14° vernier face angle reduces parallax.



Satin chrome finish with clear easy read graduations.