Produk

Hot dip protective plastic coating moulds around the component or tool to provide 100% coverage and protect against impact and corrosion.

Features and Benefits
• Hot dip plastic coating moulds itself around the part to provide 100% coverage and protect against corrosion and impacts for up to ten years
• Easy part identity through the translucent coating
• Simple to remove by peeling off
• Once removed, leaves behind a thin oil film to provide short term protection against corrosion
• Removed coatings may be reused saving cost

Notes
• Each single block measures (L)-150mm (H)-50mm (W)-80mm
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)

Warnings
• Never directly apply heat to melt the protective dip
• Always use with a suitable melting pot

M18 ONERSAL-0
• 5400 Lumens of high quality light, Over a day of runtime
• Waterproof: Fully submersible up to a meter
• 5400 lumens up to 26 hours of runtime

Manufactured from high tensile steel, this lockout hasp uses the standard scissor design to isolate equipment for repairs and adjustments.

Features and Benefits
• Electro-plated to protect against rusting
• Vinyl coated fixing ensures good grip and visibility
• Ensures equipment remains inoperative until authorised persons remove padlocks

M18 SLED-0
• The MILWAUKEE™ REDLITHIUM™-ION Battery Pack is the most durable pack on the market delivering more run-time, power and longer battery life.
• 1,250 Lumens with 650m beam distance
• 198° head rotation

314D 230 x 280mm (9"x11") Sheets.
Aluminum oxide abrasive product rolls and sheets constructed on a J weight, durable cloth backing. For use in metalworking.

Features and Benefits
• Perfect for finishing, contouring, deburring and removing rust
• Versatile, durable sheet performs excellently on metal, wood and plastic surfaces
• Cloth backing is both flexible and durable enough for machine use
• Tear sheets by hand for convenient sizing and reduced waste

This four-piece circlip plier set is the comprehensive, all-around tool to have to hand when removing or replacing circlips both internally and externally, forming an 8 in 1 tool. With straight, 45° and 90° interchangeable heads and comfort grip handles. The set includes heads that are suited for both 1.2mm and 1.5mm circlip hole diameters, with one straight 1.2mm, one straight 1.5mm, one 45° 1.5mm and one 90° 1.2mm.

Features and Benefits
• Comfort grip handles for control and ease of use
• Spring tensioned for precision and accuracy
• Interchangeable heads allow you to adapt the tool to suit your exact needs
• Has both internal and external capabilities via the interchangeable heads

Typical Applications
• Engineering
• Automotive
• Construction

For manufacturing petrochemical products, aseptic packing, or handling of rocket fuel: the Dräger X-am® 5100 portable single-gas detector ensures that you use the safest methods possible for handling HF, HCl, H2O2 or hydrazine – thanks to proven Dräger sensor technology and a device design which is perfectly customised to reactive gases.

Key features
• Highly accurate, full-featured , easy-to-use single function RTD temperature calibrator
• Measures and simulates 13 different RTD types and resistance
• Measures 4 to 20 mA signals while simultaneously sourcing a temperature signal
• Comes with a magnetic hanging tool designed in for convenient hands-free operation
• Features configurable 0% and 100% source settings for quick 25% linearity checks

The CP6500 1/2" impact wrench is a safe bet. With its powerful oil bath twin hammer clutch mechanism, aluminium body, and steel clutch housing, it is a perfect bolting tool for tough environments. It delivers max reverse torque up to 850 Nm /625 ft.lb. The oil bath clutch mechanism guarantees a low level of friction, which increases clutch component lifespan. The CP6500 Series includes 2 models: RS : ring socket retainer and PSR : pin socket retainer.

Heavy duty construction manufactured from HSS and cobalt for increased hardness and durability with 6 flutes for improved cutting performance and chip control.

Features and Benefits
• HHS-Co construction for improved hardness
• 6 flutes for improved chip control and cutting efficiency

Typical Applications
• Countersinking

Standards
• Manufactured to BS 328:Part 5:1983

48-22-8426
• Part of the PACKOUT™ Modular Storage System
• Constructed with Impact Resistant Polymers
• 250lbs Weight Capacity

M18 FSAGV100XPDB-0X0
• Generates Corded Power - Powerful POWERSTATE™ Brushless Motor spins at 8,500 RPM and allows the user to complete the toughest grinding and cutting applications
• Increased Control - Variable speed control for applications that require lower RPM grinding; 3500 - 8500 RPM
• 5 Speed Settings