Produk

State-of-the-art area monitoring – the Dräger X-zone® 5800 in combination with the Dräger X-am® 5000, 5100 or 5600 gas detection instruments can be used for the measurement of up to six gases. The internal pump and continuous power supply in the explosive area of zone 0 extend the range of applications in mobile gas detection technology.

Portable and extremely stable
• World’s smallest portable calibration baths
• Calibrates sensors of any size or shape
• Stability to ±0.015 °C
• Ranges from –30 °C to 200 °C

Need portability and extreme stability? Fluke 6102, Fluke 7102, and Fluke 7103 Micro-Baths have both. We invented the Micro-Bath. And, while many have tried to duplicate it, none of them use proprietary Fluke Calibration controllers, so none of them deliver performance like a Fluke Calibration bath. Micro-Baths can be used anywhere for any type of sensor. The 6102 weighs less than 4.5 kg (10 lb.), with the fluid. It’s lighter and smaller than most dry-wells, has a spill-proof lid, and is easier to carry than your lunch. You can take it where you need to go without carts or excessive effort. Micro-Baths can even be transported with the fluid in them.

The HSS-Co 5% Countersink 6 Piece Set features high performance, multi flute countersinks in various sizes.

Features and Benefits
• Manufactured from high speed steel and cobalt for improved strength
• Straight shank design with bright finish for improved performance on ductile metals
• Supplied in a robust carry case for easy and secure portability
• straight shank design
• 90° ground flute angle provides optimal cutting performance with an inclusive angle of 90°

Standards
• Manufactured to BS328:Part 5:1983

Contents
• 1x 8, 10, 12.5, 16, 20 and 25mm

Typical Applications
Deburring
Chamfering

Key features
• Calibrate up to four tri-clamp sanitary sensors per batch with ± 0.1 °C temperature display accuracy.
• Covers a wide temperature range: 6109A: 35 °C to 250 °C
• 7109A: -25 °C to 140 °C.
• Stainless steel casing that withstands harsh cleaning solutions; it's easy to transport and maintain.

The best power to weight ratio available in the 1-1/2, #5 impact wrench category. This compact and reliable tool is designed with a durable pinless rocking dog clutch mechanism, aluminium body and steel clutch housing to work comfortably in all heavy-duty assembly or disassembly applications. Maximum reverse torque is 8,000 Nm / 5,900 ft.lb. The CP6135 series is available in 2 configurations, with holes or spline socket retainer.

M12 FDGS-0
• More Power Than Pneumatic
• 0.3 HP Motor Output
• 3-MODE SPEED CONTROL

These abrasive paper sheets have silicon carbide, waterproof-resin bonded to paper. They are suitable for wet and dry use, making them versatile. There are a variety of grades in this range of sheets.

Features and Benefits
• Silicon carbide
• Ideal for wet and dry use
• Waterproof resin

Typical Applications
• Polishing
• Finishing
• Metals
• Plastics
• Paintwork
• Ceramics

48-22-8410
114kg Weight Capacity
QUICKSTOP™ Loading Lever Holds Dolly Securely During Stacking
Smooth Roll Wheels

The selective PID gas measurement device is ideal for users who frequently test for hazardous toxic substances. Benzene, butadiene and other volatile organic compounds (VOCs) are carcinogenic even in the smallest concentrations. Selective measurement is necessary because other gases and vapours are often also present. The gas measurement device allows for short test times and laboratory-quality results.

Hot dip strippable plastic coating moulds itself around the component or tool to provide 100% coverage and protect against corrosion and impacts for up to ten years. The protected component can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused.

Features and Benefits
• Easily moulds around tools and components
• Offers 100% coverage for effective protection against corrosion and impacts
• Long lasting protects for up to 10 years
• Components are easily identifiable thanks to the translucent coating
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)
• Reusable for a cost effective solution

Notes
• Each block measures (L)-150mm (H)-50mm (W)-80mm.
• Block weight - 0.50kg

Warning
• Never directly apply heat to melt the protective dip, always use with a suitable melting pot.

Get keyless convenience with these laminated steel combination padlocks. Featuring a double locking mechanism, these nickel plated padlocks are ideal for minimum to medium security protection, with a hardened steel shackle to resist tampering.

Features and Benefits
• Easy to reset combinations
• Choice of 3 or 4 number tumblers
• PE bumper protects the padlock surface

Notes
• 3 number tumbler offers 1,000 combinations
• 4 number tumbler offers 10,000 combinations
• Suitable for use both indoors and outdoors

M12 UHL-0
• 1,350 lumens of TRUEVIEW™ High Definition output
• MILWAUKEE"s FINISHGUARD™ hooks provide lasting protection against scratches to a vehicle"s finish
• 2X more gripping surface for maximum hold