kategori Produk
BRAND
FlukeKennedyMilwaukeeMakitaYorkBottKobe3MSealeyFlexovitSherwoodGranlundDragerGysSitesafeMatlockSenatorSuper StrengthChicago PneumaticPanasonicYamotoKennedy-ProSummitechWD 40KengripSwissBurrEdisonSolent Spill ControlKennedy Red-Hot-DipKobe Blue LineKobe Red LineHaloTuffsafeIndexaAvonYamaloyCotswoldSwisstechAtlas WorkhokdersThorOxfordRutlandCheetahMaster LockESABCIGWELDMorescoDiscfloCRCGastronMSASiemensISCSchneider
Produk
Kategori Produk
Portable true-rms meter for commercial applications. The Fluke 117 is the ideal gauge for demand settings such as trade center buildings, hospitals, schools. The Fluke 117 includes integrated non-contact voltage detection to help get jobs done faster.
See also the Fluke 114 Electrical Multimeter, Fluke 115 Multimeter, and Fluke 116 HVAC Multimeter with Temperature and Microamp.
See also the Fluke 114 Electrical Multimeter, Fluke 115 Multimeter, and Fluke 116 HVAC Multimeter with Temperature and Microamp.
Connector to Male Taper
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Gembok dengan body Laminated Steel Rekeyable Pin Tumbler 2-1/8in (54mm) ProSeries? Weather Tough?
Fitur Produk:
• Ideal untuk kondisi outdoor – penutup Weather Tough? melindungi kunci dari air, es dan kotoran
• Cover Merah, penutup visibilitas tinggi untuk perbedaan antara departemen, karyawan, akses, dll.
• ProSeries? Padlocks dirancang untuk aplikasi Komersial / Industri
• Body baja 2-1/8in (54mm) tahan terhadap serangan fisik
• Shackle dengan Tinggi 1-1/8in (29mm) dan diameter 5/16in (8mm), paduan boron yang diperkeras untuk ketahanan pemotong yang unggul
• Mekanisme penguncian bola ganda membantu mencegah dari Pencurian
• Keamanan tinggi, silinder 5-pin yang dapat dipasang kembali dengan pin spool hampir tidak mungkin untuk dicuri
• Lebar Body: 2-1/8in (54mm)
• Dimensi keseluruhan A: 5/16in (8mm) B: 1-1/8in (29mm) C: 7/8in (22mm)
• Warna: Merah
Fitur Produk:
• Ideal untuk kondisi outdoor – penutup Weather Tough? melindungi kunci dari air, es dan kotoran
• Cover Merah, penutup visibilitas tinggi untuk perbedaan antara departemen, karyawan, akses, dll.
• ProSeries? Padlocks dirancang untuk aplikasi Komersial / Industri
• Body baja 2-1/8in (54mm) tahan terhadap serangan fisik
• Shackle dengan Tinggi 1-1/8in (29mm) dan diameter 5/16in (8mm), paduan boron yang diperkeras untuk ketahanan pemotong yang unggul
• Mekanisme penguncian bola ganda membantu mencegah dari Pencurian
• Keamanan tinggi, silinder 5-pin yang dapat dipasang kembali dengan pin spool hampir tidak mungkin untuk dicuri
• Lebar Body: 2-1/8in (54mm)
• Dimensi keseluruhan A: 5/16in (8mm) B: 1-1/8in (29mm) C: 7/8in (22mm)
• Warna: Merah
Type of Luminaire : High Efficacy/Standard High Bay
Set Model No : NYV20103BE1A
Type of Light Source LED
Power Input : 175W
System Lumen Output : 25000 lm
System Efficacy : 143 lm/W
Power Voltage : 220-240V
Power Factor : 0.95
Lifetime : 50000H(L70)
CCT : 4000K
CRI : 80
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Beam Angle : 60deg.
IP Rating : 65
Ambient Temperature : -30 - 50°C
Surge Protection : 10kVA
Dimensions : 320mmx172mm
Weight : 3.9 kg
Body : ADC(Black)
Set Model No : NYV20103BE1A
Type of Light Source LED
Power Input : 175W
System Lumen Output : 25000 lm
System Efficacy : 143 lm/W
Power Voltage : 220-240V
Power Factor : 0.95
Lifetime : 50000H(L70)
CCT : 4000K
CRI : 80
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Beam Angle : 60deg.
IP Rating : 65
Ambient Temperature : -30 - 50°C
Surge Protection : 10kVA
Dimensions : 320mmx172mm
Weight : 3.9 kg
Body : ADC(Black)
The reusable gas-tight Dräger CPS 7800 provides excellent protection against gaseous, liquid, aerosol and solid hazardous substances even in explosive areas. Due to its innovative material and the new suit design it offers increased flexibility and comfort when entering confined spaces and working with cryogenic substances.
Type of Luminaire : High Efficacy/Standard High Bay
Set Model No : NYV20104BE1A
Type of Light Source LED
Power Input : 200W
System Lumen Output : 28570 lm
System Efficacy : 143 lm/W
Power Voltage : 220-240V
Power Factor : 0.95
Lifetime : 50000H(L70)
CCT : 4000K
CRI : 80
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Beam Angle : 60deg.
IP Rating : 65
Ambient Temperature : -30 - 50°C
Surge Protection : 10kVA
Dimensions : 320mmx172mm
Weight : 3.9 kg
Body : ADC(Black)
Set Model No : NYV20104BE1A
Type of Light Source LED
Power Input : 200W
System Lumen Output : 28570 lm
System Efficacy : 143 lm/W
Power Voltage : 220-240V
Power Factor : 0.95
Lifetime : 50000H(L70)
CCT : 4000K
CRI : 80
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Beam Angle : 60deg.
IP Rating : 65
Ambient Temperature : -30 - 50°C
Surge Protection : 10kVA
Dimensions : 320mmx172mm
Weight : 3.9 kg
Body : ADC(Black)
Sturdy Flukes. Reliable Flukes. Flukes are accurate.
True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tool for commercial and residential electricians. The 323, 324 and 325 series are designed to check for the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small, sturdy clamp gauges are ideally suited for current measurements up to 400 A in tight cable enclosures. The Fluke 325 also offers DC current and frequency measurements.
True-rms measurements and optimized ergonomics make the 320 Series Clamp Meters the best general troubleshooting tool for commercial and residential electricians. The 323, 324 and 325 series are designed to check for the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small, sturdy clamp gauges are ideally suited for current measurements up to 400 A in tight cable enclosures. The Fluke 325 also offers DC current and frequency measurements.
Gembok dengan body Laminated Steel Rekeyable Pin Tumbler 2-1/8in (54mm) ProSeries? Weather Tough?
Fitur Produk:
• Ideal untuk kondisi outdoor – penutup Weather Tough? melindungi kunci dari air, es dan kotoran
• Cover Merah, penutup visibilitas tinggi untuk perbedaan antara departemen, karyawan, akses, dll.
• ProSeries? Padlocks dirancang untuk aplikasi Komersial / Industri
• Body baja 2-1/8in (54mm) tahan terhadap serangan fisik
• Shackle dengan Tinggi 1-1/8in (29mm) dan diameter 5/16in (8mm), paduan boron yang diperkeras untuk ketahanan pemotong yang unggul
• Mekanisme penguncian bola ganda membantu mencegah dari Pencurian
• Keamanan tinggi, silinder 5-pin yang dapat dipasang kembali dengan pin spool hampir tidak mungkin untuk dicuri
• Lebar Body: 2-1/8in (54mm)
• Dimensi keseluruhan A: 5/16in (8mm) B: 1-1/8in (29mm) C: 7/8in (22mm)
• Warna: Merah
Fitur Produk:
• Ideal untuk kondisi outdoor – penutup Weather Tough? melindungi kunci dari air, es dan kotoran
• Cover Merah, penutup visibilitas tinggi untuk perbedaan antara departemen, karyawan, akses, dll.
• ProSeries? Padlocks dirancang untuk aplikasi Komersial / Industri
• Body baja 2-1/8in (54mm) tahan terhadap serangan fisik
• Shackle dengan Tinggi 1-1/8in (29mm) dan diameter 5/16in (8mm), paduan boron yang diperkeras untuk ketahanan pemotong yang unggul
• Mekanisme penguncian bola ganda membantu mencegah dari Pencurian
• Keamanan tinggi, silinder 5-pin yang dapat dipasang kembali dengan pin spool hampir tidak mungkin untuk dicuri
• Lebar Body: 2-1/8in (54mm)
• Dimensi keseluruhan A: 5/16in (8mm) B: 1-1/8in (29mm) C: 7/8in (22mm)
• Warna: Merah
Suited for the insertion and removal of fasteners and fixings using 1/2" square drive tooling, this range of 1/2" drive screwdriver socket bits are ideal for a host of applications. Made from chrome vanadium steel, fully chrome plated with a mirror finish, and aluminium-free, each product has an emphasis on longevity and high standards. All have ball retaining grooves on each face of the square drive and are available with various socket sizes and bit types.
Features and Benefits
• Available to purchase with varying socket sizes and bit types to ensure you find the right product to suit your needs
• Manufactured from chrome vanadium steel making for a robust product
• Each product is chrome plated to bolster resistance to corrosion, wear and tear, and general punishment
• Ball retaining groove on each face of the square drive
Typical Applications
• Ideal for use when inserting and removing fasteners and fixings in the following industries:
• Construction
• Automotive
• Engineering
• DIY
• Plumbing
• Electrical
Standards
• Conforms to DIN standards
Features and Benefits
• Available to purchase with varying socket sizes and bit types to ensure you find the right product to suit your needs
• Manufactured from chrome vanadium steel making for a robust product
• Each product is chrome plated to bolster resistance to corrosion, wear and tear, and general punishment
• Ball retaining groove on each face of the square drive
Typical Applications
• Ideal for use when inserting and removing fasteners and fixings in the following industries:
• Construction
• Automotive
• Engineering
• DIY
• Plumbing
• Electrical
Standards
• Conforms to DIN standards
TCMT Turning Inserts
60° Triangular Insert
Insert Grade QX5020
(ISO P10-P35 M10-M30 K10-K30) CVD Coated.An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
Chip Breaker: PM. Application: Med Cut.
60° Triangular Insert
Insert Grade QX5020
(ISO P10-P35 M10-M30 K10-K30) CVD Coated.An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.
Chip Breaker: PM. Application: Med Cut.
Constructed from sheet steel with a hard wearing powder coated finish.
Images are for illustration purposes only.
Images are for illustration purposes only.
'B' Shape - Shank Diameter 3mm
Features and Benefits
• All points are aluminium oxide with 'rubenite™' as standard for all general-purpose grinding and deburring on steels and most metals
• Durable and reliable constrution
Typical Applications
• Suitable for portable die and straight hand grinders
Notes
• Shank diameters are metric as listed below with inch sizes available on request
• Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only
Features and Benefits
• All points are aluminium oxide with 'rubenite™' as standard for all general-purpose grinding and deburring on steels and most metals
• Durable and reliable constrution
Typical Applications
• Suitable for portable die and straight hand grinders
Notes
• Shank diameters are metric as listed below with inch sizes available on request
• Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only