Produk

Constructed from sheet steel with a hard wearing powder coated finish.
Images are for illustration purposes only.

Double sided perfo panel trolleys constructed from sheet steel with a hard wearing powder coated finish.
Images are for illustration purposes only.
Tools not included.

Tailor-made for use in CBRN hazard situations: The gas-tight Dräger CPS 7900 provides excellent protection against industrial chemicals, biological agents, and other hazardous substances. Its innovative material qualifies the CPS 7900 equally well for civil emergency and disaster recovery missions as well as decontamination work.

Connector to Male Taper


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

Suited for the insertion and removal of fasteners and fixings using 1/2" square drive tooling, this range of 1/2" drive screwdriver socket bits are ideal for a host of applications. Made from chrome vanadium steel, fully chrome plated with a mirror finish, and aluminium-free, each product has an emphasis on longevity and high standards. All have ball retaining grooves on each face of the square drive and are available with various socket sizes and bit types.

Features and Benefits
• Available to purchase with varying socket sizes and bit types to ensure you find the right product to suit your needs
• Manufactured from chrome vanadium steel making for a robust product
• Each product is chrome plated to bolster resistance to corrosion, wear and tear, and general punishment
• Ball retaining groove on each face of the square drive

Typical Applications
• Ideal for use when inserting and removing fasteners and fixings in the following industries:
• Construction
• Automotive
• Engineering
• DIY
• Plumbing
• Electrical

Standards
• Conforms to DIN standards

Gembok Laminasi dengan tutupan stainless steel 1-3/4in (44mm) Magnum Series

Fitur Produk:
• Penutup bodi stainless steel serta pelat atas dan bawah untuk ketahanan cuaca yang luar biasa
• Bodi baja laminasi lebar 1-3/4in (44mm) untuk daya tahan yang unggul
• Shackle octagonal Boron carbide 1 inci (25 mm) 50% lebih keras dari baja yang dikeraskan
• Shackle berlapis krom untuk ketahanan karat yang sangat baik
• Penguncian dengan bola ganda untuk ketahanan cungkil maksimum
• Bumper bodi yang diperkuat agar tahan gores
• Lebar Body: 1-3/4in (44mm)
• Dimensi keseluruhan A: 5/16in (8mm) B: 1in (25mm) C: 13/16in (21mm)

Our sump and dry fit pumps are the clog-free, low cost, long-lived option that outperforms progressive cavity, centrifugal, lobe, and chopper pumps in even the toughest installations. These pumps are not only powerful but incredibly versatile.

The Kennedy® Carbide Burr Set features eight heads with varying nose shapes suitable for use on hard materials such as steel alloys, carbon and cast iron.

Features and Benefits
• Durable carbide construction
• 8-piece set with varying nose shapes to suit the preferred application
• Features a handy carry case for easy storage and tool identification
• Shank diameter: 6mm
• Max. speed (rpm): 40,000
• Chipbreaker (Cut 9): for use on cast iron, carbon steel, alloy steel 50RC and 60RC

Contents
• 1x C shape ball nosed cylinder 9.6 x 19mm
• 1x E shape oval 9.6 x 16mm
• 1x F shape ball nosed tree 9.6 x 19mm
• 1x G-shape pointed tree 9.6 x 19mm
• 1x A shape cylinder without end cut 9.6 x 19mm
• 1x C shape ball nosed cylinder 12.7 x 25mm
• 1x D shape ball 12.7 x 11mm
• 1x F shape ball nosed tree 12.7 x 25mm

Typical Applications
• Milling
• Deburring

Warnings
• Not suitable for milling large amounts of material

Type of Luminaire : High Efficacy/Standard High Bay
Set Model No : NYV20110BE2A
Type of Light Source LED
Power Input : 75W
System Lumen Output : 10710 lm
System Efficacy : 143 lm/W
Power Voltage : 220-240V
Power Factor : 0.95
Lifetime : 50000H(L70)
CCT : 6500K
CRI : 80
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Beam Angle : 60deg.
IP Rating : 65
Ambient Temperature : -30 - 50°C
Surge Protection : 10kVA
Dimensions : 240mmx166mm
Weight : 1.99 kg
Body : ADC(Black)

Ideal for off-hand grinding and deburring, the 'W' shape mounted points from Kennedy® make excellent work of medium and heavy stock. The aluminium oxide abrasive is a naturally sourced abrasive that produces less dust while effectively removing stock as required.

Features and Benefits
• All points are aluminium oxide with rubenite™ as standard - perfect for all general-purpose grinding and deburring on steels and most metals
• Designed for reliability
• Non-toxic abrasive

Notes
• Shank diameters are metric as listed below with inch sizes available on request
• Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only
• Compatible with the Kobe® FDG180m Straight Die Grinder

The Fluke 50 Series II contact thermometer offers fast response and laboratory accuracy (0.05% + 0.3°C) in a rugged hand test kit.

Double sided perfo panel trolleys constructed from sheet steel with a hard wearing powder coated finish.
Images are for illustration purposes only.
Tools not included.