Produk

• Pelumas tahan air danpanas
• Perlindungan tahan lama dari karat &korosi
• Gemuk dengan viskositas tinggi

Integrated electronics allows constant welding power for a very soft fusion induced to its direct current. Suitable for all types of electrodes such as steel, stainless steel or cast iron, it is ideal for intensive use by the public or the trade , it is can also be used for precision work in TIG Lift and MMA Pulse.

• Remarkable arc performance, basic electrodes will not longer be a problem.
• Very good penetration and perfect arc stability.
• MMA Pulse : Developed for pipe welding as well as vertical welding.
• Delivered in a case with earth clamp and electrode holder.
• With an IP21 protection rate, it is suitable for outdoor work on site.
• Not affected by mains fluctuations or arc length.
• Protected and compatible with a Generator 6Kw (7,5Kva)

TIG Lift :
• For the meticulous work on thin metal sheets
• Easy start
• Finish quality
• Downslope auto

M18 FSZ-0X0
• POWERSTATE™ Brushless motor for longer motor life and faster cutting
• REDLINK PLUS™ intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load
• REDLITHIUM™-ION battery pack provides superior pack construction, electronics and fade-free performance to deliver more run time and more work over pack life

KWH100 polyamide welding helmets with dedicated grinding mode.

Features and Benefits
• Auto darkening lenses which automatically change from light to dark shade when arc is struck
• External sensitivity control provides clear vision both prior to and during welding
• Special turnover headband mechanism offers greater comfort and reduces fatigue
• Ultra high-performance filters protect against UV and IR - up to Shade DIN16
• Dual powered - Solar cells and CR2450 lithium battery
• Power On/Off: Fully automatic
• Large view - 98 x 55mm
• Impact resistant
• Corrosion resistant
• Lightweight
• Manufactured from durable and flame-retardant material

Typical Applications
• Suitable for all kinds of welding types, including TIG low amperage

Notes
• Light State: DIN4
• Variable Shade: From DIN9 to DIN13
• Operating Temperature: -5°C to +55°C (23°F to 131°F)
• Storing Temperature: -20°C to +70°C (-4°F to 158°F)

Standards
• Full conformity with related DIN EN 379, DIN EN 175 B and ANSI Z87.1

Key features
Ultra-cool dry-block calibrator with best-in-class stability

The Fluke 9190A Ultra-Cool Field Metrology Well is the most accurate and stable, cold temperature dry-block on the market. It’s ideal for applications that demand strict quality control and regulatory process compliance. These applications include on-location validation and calibration of RTDs, thermocouples, thermometers, and sensors used with process control equipment such as medical freezers, laboratory refrigerators, cold rooms, blood banks, sterilizers (autoclaves), and freeze dryers.

Wide temperature range
–95 °C to 140 °C

Excellent accuracy
Accuracy using built-in referencethermometer readout: ±0.05 °C full range
Display accuracy: ±0.2 °C full range
Best-in-class stability
±0.015 °C full range

Fast cooling time
23 °C to –90 °C: 80 minutes
23 °C to –95 °C: 90 minutes
140 °C to 23 °C: 60 minutes

Portability
Weighs only 16 kg (35 lbs)
Built-in front and back handlesfor easy two-handed carry
Best measurement practices
Conforms with EURAMET cg-13 guidance on measurement practices for temperature calibrators

A quality range of single flute countersinking bits available in nine individual sizes and as a five piece set for use in the deburring and chamfering of most metals and plastics. Manufactured from high speed steel for durability and performance. Inclusive angle 90°.

These abrasive paper sheets have silicon carbide, waterproof-resin bonded to paper. They are suitable for wet and dry use, making them versatile. There are a variety of grades in this range of sheets.

Features and Benefits
• Silicon carbide
• Ideal for wet and dry use
• Waterproof resin

Typical Applications
• Polishing
• Finishing
• Metals
• Plastics
• Paintwork
• Ceramics

The X-am® 5800 multi-gas detector measures up to six gases and is equipped with a shock-resistant CatEx SR sensor. With the Dräger Gas Detection Connect software, it offers live data transmission and powerful fleet management. Designed for personal monitoring, the X-am 5800 offers the highest level of safety at a low cost of ownership.

Industrial general purpose granules made from a naturally occurring mineral, Attapulgite, which can be used for absorbing most fluids including water, oil and fuels. Supplied in a 20 litre bag with an absorbency of roughly 12 litres per bag.

Features and Benefits
• Is the industry's most widely used granule type, making it a reliable product
• Non-toxic and chemically inert making it safe for use
• Quick and easy to use and can be spread via hand
• Excellent absorbency performance - up to 12 litres per bag

Typical Applications
• Suitable for use when soaking up fuels, oil, water and most non-hazardous liquids

Standards
• Fire retardant to comply with BS 476 Part 7, Class 1 rated

M12 SAL-0
• Light head rotates 210° and pivots 270° for light in any direction
• Collapses down to 78cm with three side handles for easy transportation and storage
• Sets up in 5 seconds, Three height positions; 90cm, 127cm & 173cm

Improve assembly quality with this 1-12"/#5 impact wrench. With a heavy-duty 2-jaw clutch mechanism, an aluminium body, and a steel clutch housing, this tool is designed for comfort and durability. Delivers reverse torque up to 4,880 Nm / 3,600 ft.lb. The CP6120 series is based on 2 models, hole or spline socket retainer.

Manufactured from chrome molybdenum steel, these TX keys are best used for loosening and tightening countersunk hexagon fastenings. Supplied in a plastic storage clip that is clearly labelled to help you identify the correct size key. Comes with 9 L-wrench keys of varying sizes.

Features and Benefits
• Black oxide finish protects the product from corrosion
• Manufactured from robust chrome molybdenum steel for overall product longevity
• 9 piece set contains the most commonly used sizes to help you to be prepared for any applications
• Supplied in a plastic storage clip to keep your tools together

Typical Application
• Furniture Assembly
• Bicycle Repair and Maintenance