a a a a a a a a a a a a
Distributor Fluke
Distributor Fluke
Customer Services
(021) 2908-5810
/
628111042805
Product

Produk

Kategori Produk
Cartridge Roll Taper 38 x 12mm P60 Aluminium Oxide
York Cartridge Roll, Taper, 38 x 12mm, P60, Aluminium Oxide
Cartridge Rolls Aluminium Oxide Cloth Rolls used for weld flash removal, deburring, blending and polishing applications.

Features and Benefits
• Spirally wound cloth rolls wear in use, constantly exposing new abrasive
• Tapered type which is ideal for angles, corners and irregular or concave surfaces

Notes
• An appropriate steel mandrel must be used to secure the abrasive to the tool
• Available in two types
16302 FC Earth Ground Clamp
Fluke 1630-2 FC Earth Ground Clamp
The Fluke 1630 is a MUST HAVE for those who are intent on improving the reliability of their systems and making it impervious to impulse damage. The Fluke 1630 is easy to use, highly accurate and an industry standard”- verified purchaser



The 1630-2 FC clamp measures earth ground loop resistances for multi-grounded systems using the dual-clamp jaw. This test technique eliminates the dangerous and time-consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations for auxiliary test stakes. You can also perform ground tests in places that were previously difficult: inside buildings, on power pylons or anywhere you don't have access to soil to place auxiliary test stakes.



Earth ground ac leakage current measurement

- Identify ac leakage currents without disconnecting the earth ground stake from the grounding system–ideal for system troubleshooting.

- Rugged heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments.



Logging measurements

- The earth ground clamp saves time by automatically recording data at pre-set intervals

- Saves up to 32,760 measurements in memory at the set logging interval.

- Saves time by recording and storing measured values.



Alarm threshold

- User-defined high/low alarm limits, for rapid measurement evaluation.



Band-pass filter

- Selectable band-pass filter function removes unwanted noise from the ac leakage current measurement.



Fluke Connect® Wireless System

- The 1630-2 FC supports the Fluke Connect Wireless System connects the clamp with an app on your smartphone or tablet (may - not be available in all regions).

- You can save these measurements, and images to Fluke Connect Cloud storage and share with your team.

- Maximize uptime and make confident maintenance decisions with data you can trust and trace.

- Access baseline, historical and current measurements by asset.

- Share your measurement data using ShareLive™ video calls and emails.

- The 1630-2 FC is part of a growing system of connected test tools and equipment maintenance software. Visit the website to learn more about the Fluke Connect system.



NYS12747LD2031
Panasonic NYS12747LD2031
Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NYS12747LD2031
Type of Light Source : LED
Power Input : 661W
System Lumen Output : 103400 lm
Power Voltage : 200-242V
Lifetime : 40000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 54deg.
Beam Angle : 34deg.
IP Rating : 65
Ambient Temperature : -20 - 35°C
Dimensions : 487mmx537mmx720mm
Body : ADC
Hydraulic Nipple 90 18 BSPT Steel
Kennedy Hydraulic Nipple, 90°, 1/8" BSP(T), Steel
For use with Kennedy grease guns and all other hydraulic grease equipment.

PARAT Filtering Escape Hoods
Drager PARAT® Filtering Escape Hoods
The PARAT® filtering escape hoods were developed with users, placing the focus on the fastest possible escape. Optimized operation and wearing comfort, a robust case and a sealed filter ensure protection from toxic industrial and/or fire-related gases, vapours and particles for at least 15 minutes.
12in Drive BiHexagon Socket 11mm Metric 12 Point
Kennedy-Pro 1/2in. Drive, Bi-Hexagon Socket, 11mm, Metric, 12 Point
With a 1/2" square drive, these vanadium steel bi-hexagonal sockets are the ideal product for working on hard to reach fastenings or more stubborn fastenings due to their 12 point design. Possessing a higher torque than normal sockets, this range of sockets can also effectively grip worn nuts and won't round off existing nuts. Finished with a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories.

Features and Benefits
• Side drive design gives a higher torque than regular sockets
• Ball retaining groove on each product ensures a positive fit with compatible accessories
• Manufactured from vanadium steel for durability
• Available in a variety of sizes to allow you to purchase the size that best suits your requirements
• Requires only a one-twelfth turn to engage the next point of the socket

Typical Applications
• Ideal for use when tightening or loosening hexagonal shaped fastenings in a variety of industries including:
• Automotive
• Construction
• Agricultural
• Plumbing

5000kg SWL Lifting Sling Flat 150mm x 6m Red
Matlock 5000kg SWL, Lifting Sling, Flat, 150mm x 6m, Red
These flat webbing slings have a high strength-to-weight ratio, are light to handle, and are easy to use. Shock-absorbing construction and wide load-bearing area produce a secure grip and eliminate damage to the load. All types are made from oil and acid-resistant polyester, treated with a wear-resistant impregnation. All sizes are colour coded to indicate 'SWL' (safe working load), and rating and marked with traceability code. These ratings are for a straight-line pull only. Other variations of pull are shown below along with the relevant 'SWL'.

Features and Benefits
• Manufactured from oil and acid-resistant polyester making for a durable product
• Available in a range of sizes and specifications to suit your application
• Lightweight design and easy to use
• Colour coded to indicate the correct Safe Working Load (SWL) for correct product identification
• Available in a range of sizes to suit different requirements

Typical Applications
• Construction
• Transportation
• Logistics

Standards
• Made to BS EN 1492:1 - 2000
KC102FP KENFIT CONN 10 mm  G14 FP
Kennedy KC10-2FP KEN-FIT CONN. 10 mm - G1/4 F/P
Connector to Female Parallel


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
KC104MT KENFIT CONN 10 mm  G12 MT
Kennedy KC10-4MT KEN-FIT CONN. 10 mm - G1/2 M/T
Connector to Male Taper


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Carbide Burr Uncoated Cut 6  Double Cut 3mm Ball
York Carbide Burr, Uncoated, Cut 6 - Double Cut, 3mm, Ball
Cut 6 Double Cut Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.

Features and Benefits
• Manufactured from high grade tungsten carbide for increased toughness
• Cut 6 double cut improves cutting control and chipbreaks
• Suitable for deburring and polishing applications

Typical Applications
• Deburring
• Polishin
• Cast iron
• Cast steel
• Carbon steel
• Alloy steel
• Stainless steel
• Materials up to HRC65 hardness

Notes
• Work piece and tools should always be steady and well supported
• Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'
• Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used
• Always ensure that the tool is rated to the recommended operating speed of the burr
Master Lock 410 LTBLK Thermoplastic 38mm
Master Lock Master Lock 410 LTBLK Thermoplastic 38mm
Gembok LOTO, Black Zenex Thermoplastic Safety. Lebar Body 1-1/2in (38mm) dengan tinggi Shackle 3in (76mm)

Fitur Utama:
– 410 Gembok Pengaman Termoplastik
– Lebar 1-1/2in (38mm), tinggi 1-3/4in (44mm), Shackle dengan jarak bebas 3in (76mm)
– Didesain khusus untuk aplikasi penguncian/tagout
– Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
– Sesuaikan di tempat dengan label permanen dan tertulis
– Kepatuhan terhadap arahan “One Employee, One Lock, One Key”
– Silinder keamanan tinggi, disediakan untuk keselamatan
– Penahan kunci – memastikan bahwa gembok tidak dibiarkan terbuka
– Kunci berbeda, 6-pin tumbler dengan lebih dari 40.000 silinder penggantian kunci yang tersedia, Shelf – Pack Qty 6, Master Carton Qty 36
Cartridge Roll Taper 38 x 12mm P80 Aluminium Oxide
York Cartridge Roll, Taper, 38 x 12mm, P80, Aluminium Oxide
Cartridge Rolls Aluminium Oxide Cloth Rolls used for weld flash removal, deburring, blending and polishing applications.

Features and Benefits
• Spirally wound cloth rolls wear in use, constantly exposing new abrasive
• Tapered type which is ideal for angles, corners and irregular or concave surfaces

Notes
• An appropriate steel mandrel must be used to secure the abrasive to the tool
• Available in two types