Produk

Optimize bolting and unbolting with this 1" impact wrench. Featuring a durable pinless rocking dog clutch mechanism, aluminium body and clutch housing, this tool is designed to operate comfortably in the most demanding industrial environments, including both maintenance and production. The CP6910/CP6920 Series is defined by 2 models, pistol CP6110-P24 and straight D-handle CP6120-D24 for a delivered max reverse torque of up to 2,600 Nm / 1920 ft.lb.

48-22-8424
48-22-8425
• Part of the PACKOUT™ Modular Storage System
• Constructed with Impact Resistant Polymers
• IP65 Rated Weather Seal

1'' Impact Wrench - 6'' anvil

These high-quality bench grinding wheels are ideal for a wide range of material applications. Designed to fit on all leading brand machines, they provide an excellent performance to all projects.

Features and Benefits
• Suitable for all-purpose applications
• High hardness levels for consistent results

Typical Applications
• Sharpening
• Deburring
• Rust removal

Standards
• EN 12413

Warnings
• Not permitted for wet grinding

Notes
• All 150mm grinding stones fit 13mm bore sizes with 32-13mm diameter reduction bushes supplied where necessary

Increased robustness thanks to the powerful 1-1/2" impact wrench, designed with oil bath twin hammer clutch mechanism, aluminium body, and clutch housing. With a maximum reverse torque of up to 3,900 Nm / 2,875 ft.lb., the CP6930-D35 is the ideal solution for maintenance applications. It is reversible and its steel trigger allows makes it easy to use in the bolting phases. The CP6930-D35 is equipped with a hole socket retainer for maximum safety.

This 1/4" & 3/8" butterfly impact wrenches series, designed for tight applications is highly recommended. The double rocking dog impact mechanism and metal motor housing offer high durability. High productivity is ensured with a torque of 80 ft.lbs / 110 Nm. The CP7711/CP7721 series consists of 2 models: 1/4" short anvil and 3/8" short anvil.

The CP721 Series 3/8" impact wrench offers a rocking dog mechanism and a metal motor housing for high durability and smooth operation. High productivity is ensured with a torque of 75 ft.lbs / 102 Nm while also being compact and comfortable to use.

RP250

Used for dispensing lubricants and disel, this cast iron pump with a steel suction tube and spout is the easy way to control the flow of said liquids. Suitable for container size of 200 litres, the pump possesses an inlet of 2" BSP and M59 x 5 male thread.

Features and Benefits
• Cast iron pump with steel suction tube and spout making for a hardy product
• Suited for use on a 200 lite capacity barrel
• With a 980mm tube to easily dispense liquids when necessary

Typical Applications
• Suited for controlling the flow of fluids in a 200 litre barrel

Key features
• Powerful, easy-to-use, high-accuracy temperature calibrator
• Test and calibrate temperature sensors and transmitters
• Measures 4 to 20 mA loops and can provide loop power
• Measures RTDs, thermocouples, ohms, and volts
• Source/simulates thermocouples, RTDs, volts, and ohms

The CP772 Series is the "Classic" 3/4" impact wrench, designed with a pin clutch mechanism in oil bath and a metal motor housing for high durability.

M18 PAL-0
• 1500 Lumens of TRUEVIEW™ High Definition Output
• Powerful Magnetic base
• 2" Spring Loaded Clamp

This 3/8" and 1/2" impact wrench series, designed with a pin clutch mechanism in oil bath and a metal motor housing for high durability is highly recommended. High productivity in loosening and tightening nuts, while also being both compact and comfortable. The CP724/CP726 Series consists of 2 sizes : 3/8" short anvil and 1/2" short anvil.