Tools & Chemicals
Kennedy 36mm Deep Impact Socket, 1in. Square Drive
The 1 inch square drive, deep impact socket from Kennedy® is made from chrome molybdenum alloy steel with a black oxidised finish. The socket is clearly marked making it easy to identify for a quicker selection.
Features and Benefits
• Chrome molybdenum alloy steel for greater durability
• Black oxidised finish for prolonged tool lifespan
• Permanent laser-etched markings for easy tool identification
Standards
• Conforms to DIN 3129
Features and Benefits
• Chrome molybdenum alloy steel for greater durability
• Black oxidised finish for prolonged tool lifespan
• Permanent laser-etched markings for easy tool identification
Standards
• Conforms to DIN 3129
Download
Products Lainnya
Featuring Ken-Grip® patented design sockets that grip fasteners that up to 95% rounded off and will not damage worn or rusted fasteners. Manufactured from Chrome Vanadium steel, they will fit a range of non-metric hexagons and E-Torx drive sizes. The screwdriver bits are manufactured from Chrome Molybdenum. Supplied in a robust case.
Features and Benefits
• Ken-Grip® sockets will not round off existing nuts
• 60 piece set is extremely comprehensive to ensure you have the correct component and tool to hand no matter the application
• Screwdriver bits are manufactured from chrome molybdenum steel, whilst the sockets are manufactured from chrome vanadium steel for optimum durability
• Supplied in a robust plastic case for ease of transportation, organisation and storage of your components
Contents
• Metric sockets: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 10mm, 11mm, 12mm, 13mm. 14mm
• Crosspoint: No 1, No 2, No 3
• Pozidriv: No 1, No 2, No 3
• Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40
• Slotted: 3.5, 4.5, 5.5, 6.5, 8
• Hexagon: 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8
• Tri-Wing: No 3, No 4, No 5
• Torq Set: TS.5, TS.6, TS.8, TS.10
• SIT: No 10, No 20, No 25, No 30, No 40
• Accessories: 1/4in. Square drive, 1/4in. hex magnetic bit holder, Y adaptor for cup hook, Spinner handle
Typical Applications
• Construction
• Engineering
• Automotive
Features and Benefits
• Ken-Grip® sockets will not round off existing nuts
• 60 piece set is extremely comprehensive to ensure you have the correct component and tool to hand no matter the application
• Screwdriver bits are manufactured from chrome molybdenum steel, whilst the sockets are manufactured from chrome vanadium steel for optimum durability
• Supplied in a robust plastic case for ease of transportation, organisation and storage of your components
Contents
• Metric sockets: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 10mm, 11mm, 12mm, 13mm. 14mm
• Crosspoint: No 1, No 2, No 3
• Pozidriv: No 1, No 2, No 3
• Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40
• Slotted: 3.5, 4.5, 5.5, 6.5, 8
• Hexagon: 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8
• Tri-Wing: No 3, No 4, No 5
• Torq Set: TS.5, TS.6, TS.8, TS.10
• SIT: No 10, No 20, No 25, No 30, No 40
• Accessories: 1/4in. Square drive, 1/4in. hex magnetic bit holder, Y adaptor for cup hook, Spinner handle
Typical Applications
• Construction
• Engineering
• Automotive
Half Round Diamond Needle File 16cm.
Available in seven shapes and two grain sizes offering the solution to finishing problems where material hardness makes conventional files ineffective. Plated with finely selected diamond powder, 120 - 150 mesh.
Features and Benefits
• Solution to finishing problems where material hardness makes conventional files ineffective
• Extremely Durable - Plated with finely selected diamond powder
• Non-slip grip handle
Typical Applications
• Can be used on tungsten carbide, ceramics, carbon, glass, fibreglass and hardened steels such as stainless steel, nimonics, titanium etc.
Available in seven shapes and two grain sizes offering the solution to finishing problems where material hardness makes conventional files ineffective. Plated with finely selected diamond powder, 120 - 150 mesh.
Features and Benefits
• Solution to finishing problems where material hardness makes conventional files ineffective
• Extremely Durable - Plated with finely selected diamond powder
• Non-slip grip handle
Typical Applications
• Can be used on tungsten carbide, ceramics, carbon, glass, fibreglass and hardened steels such as stainless steel, nimonics, titanium etc.
Manufactured from chrome vanadium steel (except 1.7/16" x 1.5/8", 1.1/2" x 1.5/8", 1.11/16" x 1.7/8", 1.13/16" x 2" which are made from drop forged carbon steel) with a satin finish body and highly polished heads. Complete with a 15° offset head for user ease, each product is suited for everyday, general purpose usage.
Features and Benefits
• Manufactured from chrome vanadium steel (except 1.7/16" x 1.5/8", 1.1/2" x 1.5/8", 1.11/16" x 1.7/8", 1.13/16" x 2" which are made from drop forged carbon steel) for durability and overall product longevity
• 15° offset head makes for easier turning with less user effort
• Available in a variety of sizes to suit your specific application
• Satin chrome finish and highly polished heads that repel dirt and grime for easy cleaning of your tool
Typical Applications
• Engineering
• Automotive
• Plumbing
• Constrution
Standards
• DIN 3110: 1/4" x 5/16" to 1 5/16" x 1 5/8"
• ASME B107.39: 1 7/16" x 1 5/8" to 1 13/16" x 2"
Features and Benefits
• Manufactured from chrome vanadium steel (except 1.7/16" x 1.5/8", 1.1/2" x 1.5/8", 1.11/16" x 1.7/8", 1.13/16" x 2" which are made from drop forged carbon steel) for durability and overall product longevity
• 15° offset head makes for easier turning with less user effort
• Available in a variety of sizes to suit your specific application
• Satin chrome finish and highly polished heads that repel dirt and grime for easy cleaning of your tool
Typical Applications
• Engineering
• Automotive
• Plumbing
• Constrution
Standards
• DIN 3110: 1/4" x 5/16" to 1 5/16" x 1 5/8"
• ASME B107.39: 1 7/16" x 1 5/8" to 1 13/16" x 2"