Connector to Female Parallel


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

IWS100X - 1" square drive. Suitable for industrial and commercial production and assembly applications. Side handle for two-handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and three position power regulator. Top venting exhaust. Oiling points for daily maintenance.

Bolt Capacity: M33
Working torque: 2,030 Nm
Maximum torque: 2,300Nm
Safe working pressure: 6.2bar / 90psi.
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2" (13mm).
Air pressure: 6.3bar/90 psi.
Air consumption: 7.0 cfm.
Sound pressure level: 96 dBA.
Sound power level: 101.67 dBA.
Vibration level: 6.0 m/s².
Overall length: 448mm.

The CP7749 1/2" impact wrench features a reverse torque of up to 955ft.lbs / 1,300 Nm, enabling quick & efficient loosening and tightening. The tool benefits from S2S technology, which limits stress on the wrist and arm when changing between forward and reverse. The twin hammer impact mechanism and composite housing offer high durability while being both lightweight and compact. The CP7749 series is composed of 2 models: 1/2" short anvil and 1/2" long anvil (2" anvil).

Available in Female to Male and Female to Female fitting.


Pressure range: 0 to +10bar.


Temperature range: -25 to +90°C.